The rgw-gap-list tool can produce a number of false positives when the
cluster is being used during its run. One technique to minimize the
number of false positives is to run the tool twice and look for the
objects that appear in both lists. The rgw-gap-list-comparator tool is
designed to do this comparison.
Signed-off-by: Michael Kidd <linuxkidd@gmail.com>
Due to a prior bug (pr: 38228) tail rados objects of some RGW objects
could have been incorrectly deleted. This tool is designed to look for
such cases. It essentially does the opposite of rgw-orphan-list,
looking for rados objects that RGW expects to be there, but which are
not to be found.
IMPORTANT: This is very experimental at this point in time, and any
"results" produced should be verified by other means.
Signed-off-by: J. Eric Ivancich <ivancich@redhat.com>
Signed-off-by: Michael Kidd <linuxkidd@gmail.com>
This library is obsolete with the mgr volumes plugin since Nautilus.
The last remaining user of this library was Manila which will be using
the volumes plugin with Pacific and onwards.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Install the mount.fuse.ceph man page and ship it in the ceph-fuse
packaging along with the corresponding mount.fuse.ceph binary.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
jaeger specifically requires yaml-dev +0.6 but since all supported
distro(bionic) still doesn't have this version, yaml-cpp will be build
from source if enabled.
This fixes the build failure:
```
Could NOT find yaml-cpp: Found unsuitable version "", but required is at
least "0.5.1" (found yaml-cpp_LIBRARY-NOTFOUND)
```
Signed-off-by: Deepika Upadhyay <dupadhya@redhat.com>
* This commit introduces Jaegertracing library as package libjaeger,
pickwhich would be consumed by other ceph pacakges such as ceph-common0
* adds the following dependencies, which would be build from source
using ExternalProjectHelper.cmake +IncludeJaeger.cmake +
Build<package>.cmake scripts:
jaegertracing: v0.6.0 [added as a submodule]
opentracing: v1.6.0 [added as a submodule]
thrift: 0.13.0 [added as a submodule]
yaml-cpp: 0.6.0
json(optional)
* updates Boost to be installed instead of being build only, because
jaegertracing them during their build process.
* ceph.spec.in: introduces a default enabled jaeger packaging option,
which could be disabled using --without-jaeger flag during rpmbuild
* note: libjaeger package if enabled will be a dependency on ceph-common, ceph-mon, rgw_common and transitively will be a dependency for modules that have them as a dependency.
Signed-off-by: Deepika Upadhyay <dupadhya@redhat.com>
This commit fixes Building wheel for cffi (setup.py) ... error:
c/_cffi_backend.c:15:10: fatal error: ffi.h: No such file or directory
some python packages do not offer precompiled binary packages for aarch64 on PyPI.
only happens on non-amd64 arches, so add [!amd64].
Signed-off-by: JiangYu <lnsyyj@hotmail.com>
This commit introduces internal (not yet part of the api) librbd functions for:
1. formating an RBD image in LUKS format
2. parsing an RBD image in LUKS format
The actual implementation of the LUKS format is done via libcryptsetup, which is added as a new dependency.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
change sudoers file mode to 440 to match recommended defaults.
From the sudoers man page.
> the default file mode is 0440 (read‐able by owner and group, writable
by none).
> The default mode may be changed via the “sudoers_mode” option to the
sudoers
> Plugin line in the sudo.conf(5) file.
Fixes: https://tracker.ceph.com/issues/48169
Signed-off-by: David Turner <drakonstein@gmail.com>
nasm support build isa-l:AVX512 algorithm implementation while yasm
doens't support it. Install nasm assembler to build isa-l
refer to: https://github.com/yasm/yasm/issues/101
Signed-off-by: Changcheng Liu <changcheng.liu@aliyun.com>
The file mgr/volumes/fs/operations/pin_util.py imports distutils.util for using
strtobool and thus the python package is required.
Signed-off-by: Johannes M. Scheuermann <joh.scheuer@gmail.com>
These packages are needed in order to scrape device health metrics from
devices used by OSD and MON daemons.
smartmontools' smartctl is what we use in order to scrape devices' SMART
attributes and general health metrics.
In addition, we use nvme-cli tool on NVMe devices, which fetches
vendor specific NVMe related health metrics.
Ceph rely on these tools for proper functioning of the underlying layers
of devicehealth mgr module, and other mgr modules which use devicehealth
functionality (such as diskprediction_local, telemetry, dashboard).
Essentially, most of devicehealth commands rely on proper functioning of
smartctl, otherwise they lack the device health metrics.
For example, in case smartctl is missing, the commands:
ceph device scrape-daemon-health-metrics <who>
ceph device scrape-health-metrics [<devid>]
will not be able to scrape health metrics, and the command:
ceph device predict-life-expectancy <devid>
will not provide any meaningful output (since there are no metrics).
In short, when we scrape a device by its daemon (be it an OSD or a MON):
ceph device scrape-daemon-health-metrics <who>
The devicehealth module command eventually invokes a
block_device_get_metrics() call in either osd/OSD.cc or mon/Monitor.cc,
which wraps calls to both
block_device_run_smartctl() (spawns smartctl)
block_device_run_vendor_nvme() (spawns nvme)
in common/blkdev.cc.
Minimum version requirements:
'smartmontools' is the package name, which contains two utility
programs: 'smartd' and 'smartctl'. Ceph uses the latter.
Version 6.7 of smartctl first introduced the --json option (beta), which
allows to output the metrics in a JSON format. Since then a few
adjustments were made and the feature officially launched in smartctl
version 7.0.
Since we rely on the JSON format to process the metrics, we must have
smartmontools' smartctl version >= 7.
That said, we choose not to specify smartmontools version here on
purpose, since there might be a scenario where:
We specified smartmontools version to be >= 7.
smartmontools 7 is not available yet in rhel 8 / centos 8.
A user installs via rpm ceph-osd, for example.
smartmontools will not be installed (since version >= 7 is not available
in this repo yet).
Then the user upgrades to 8.3 (which should have smartmontools >= 7),
but smartmontools will not get upgraded (since it's not installed).
In the scenario where we do not specify a version, smartmontools 6.6
will be installed, but it will be upgraded to >= 7 when a user upgrades
(and if it's a fresh installation - version >= 7 would be installed
anyway).
nvme-cli does not have a minimum version.
We use 'Recommends' for both rpm and deb packages since we do not want
the installation to fail in case of conflicts. 'Recommends' weakens the
dependency to be installed in case possible, but ignores it in cases of
conflicts with other dependencies.
It's worth mentioning that smartmontools and nvme-cli dependencies exist
in ceph-container builds.
We add them here for the cases of bare metal installations.
In the future we will add a separate package (with smartmontools and
nvme-cli dependencies) that can be installed on any node (running
rbd-mirror, rgw, mds, mgr, etc.), in order to be able to collect the
health metrics of its devices and offer their life expectancy
prediction.
Fixes: https://tracker.ceph.com/issues/47479
Signed-off-by: Yaarit Hatuka <yaarit@redhat.com>
rpm,deb: drop /etc/sudoers.d/cephadm
Reviewed-by: Sebastian Wagner <sebastian.wagner@suse.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Kefu Chai <kchai@redhat.com>
Current behavior (without this patch) is:
1. cephadm package installs cephadm at /usr/sbin/cephadm
2. cephadm package installs /etc/sudoers.d/cephadm
3. !!! BUT this file refers to a non-existent executable (/usr/bin/cephadm) !!!
4. the PR that introduced this sudoers file (and this discrepancy) was merged in 2019
5. nobody noticed the discrepancy until now
My conclusion: the file /etc/sudoers.d/cephadm is not needed for cephadm to
work.
Fixes: https://tracker.ceph.com/issues/47112
Signed-off-by: Nathan Cutler <ncutler@suse.com>
This reverts commit a55c1dd0fa.
Kept to keep upgrades from older point releases working.
This module can be removed as soon as we no longer
support upgrades from old octopus point releases.
Revert "build/debian: remove osd_support"
This reverts commit 8ff2824beb.
Fixes: https://tracker.ceph.com/issues/47109
Signed-off-by: Sebastian Wagner <sebastian.wagner@suse.com>
the service offered by https://www.diskprophet.com is not accessible
anymore. before we have a replacement of it, let's drop
mgr-diskprediction-cloud. and remove its packaging.
Signed-off-by: Kefu Chai <kchai@redhat.com>
The rbd-nbd daemon expects the rbd-nbd_quiesce script to be installed
in the libexec directory on all distros.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Debian has adopted FHS 3.0 with Debian Policy Standard version 4.4.0,
and now defaults to /usr/libexec for libexecdir as well. This is
present in Ubuntu 20.04 LTS, for example.
Signed-off-by: Neal Gompa <ngompa13@gmail.com>
mgr/cephadm: use jinja2 to render templates
Reviewed-by: Ernesto Puerta <epuertat@redhat.com>
Reviewed-by: Sebastian Wagner <sebastian.wagner@suse.com>
The librbd parent cache is an initial testbed for librbd plugin
support. The shared library will be packaged with librbd for the
time being.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
* refs/pull/34596/head:
test: add a new program for testing ino_release_cb
client: add a new inode release request callback
client: expose ceph_ll_register_callbacks via libcephfs
client: move callback typedefs and arg struct into ceph_ll_client.h
client: rename ceph_statx.h to ceph_ll_client.h
client: make client_dentry_callback_t more friendly for C
client: only override umask_cb with non-NULL values
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Zheng Yan <zyan@redhat.com>
Reviewed-by: Greg Farnum <gfarnum@redhat.com>
