in src/CMakeLists.txt, if "WITH_FUSE" is true, we always link ceph-fuse
against FUSE::FUSE no matter what FUSE_FOUND is.
to avoid the FTBFS when FUSE is not found when building ceph-fuse, we'd
better fail early by marking FUSE a must have.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
* CMakeLists.txt:
always pass "EXACT" to find_package(Python3).
because per cmake document, "EXACT" only takes effect when
<Package>_FIND_VERSION_COUNT is greater than 1, where <Package>
is "Python3". see also cmake/modules/FindPython/Support.cmake
* cmake/modules/AddCephTest.cmake:
drop redundant find_package(Python3) calls. since Python3 is
a mandatory requirement for building Ceph, we only need a
single call of find_package(Python3..) in the top of the source
tree. the only possible case to repeat it is to ensure that we
have the correct version of Python3 used in following CMake
script. but there is no need to repeat it if we just want to
ensure that we have a python3 interpretor in place.
* cmake/modules/Distutils.cmake:
always pass "EXACT" to find_package(Python3).
we should always pass EXACT to find_package() when finding python3,
this is a follow-up of e2babdfae8
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
The purpose of this patch is to add the initial support to
offload memory/pmem operations by sync usage through hardware path
in DML library.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Commit 403f1ec288 ("cmake: make "WITH_CEPH_DEBUG_MUTEX" depend on
CMAKE_BUILD_TYPE") made WITH_CEPH_DEBUG_MUTEX depend on build type
being set to Debug, in CMakeLists.txt. However, if CMAKE_BUILD_TYPE
isn't specified by the user, we may still set it to Debug later, in
src/CMakeLists.txt, and in that case WITH_CEPH_DEBUG_MUTEX doesn't
get enabled. The result is that
$ do_cmake.sh -DCMAKE_BUILD_TYPE=Debug ...
debug builds have mutex debugging enabled, while
$ do_cmake.sh ...
builds, which are supposed to be the same, don't. Jenkins builders
don't pass -DCMAKE_BUILD_TYPE=Debug so that commit effectively turned
off all ceph_mutex_is_locked* asserts in "make check".
Fixes: https://tracker.ceph.com/issues/55318
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
change the default value of WITH_SYSTEM_UTF8PROC from ON to OFF, so that
centos/rhel users can build with the default cmake configuration. no other
WITH_SYSTEM_* variable in ceph defaults to ON, so this is consistent
with other bundled libraries like boost and rocksdb
unfortunately, this also means that users that do have system packages
must opt-in to using them with -DWITH_SYSTEM_UTF8PROC=ON
both deb and rpm builds dependended on the previous default value, so
their logic was negated to match the new default
Fixes: https://tracker.ceph.com/issues/55114
Signed-off-by: Casey Bodley <cbodley@redhat.com>
adds utf8proc submodule, needed by the arrow submodule in centos. add a
WITH_SYSTEM_UTF8PROC option that controls whether or not utf8proc is
built from submodule
non-system utf8proc is built as a static library to avoid conflicts with
system-provided libraries
ceph.spec.in sets WITH_SYSTEM_UTF8PROC=OFF until it's available in
centos
Signed-off-by: Casey Bodley <cbodley@redhat.com>
adds an arrow submodule. when WITH_RADOSGW_SELECT_PARQUET is enabled,
the submodule is built as an external project and rgw links against its
imported Arrow::Parquet target
Signed-off-by: Casey Bodley <cbodley@redhat.com>
because QAT driver with version v1.7.l.4.14.0 or higher cannot be dowmloaded
directly by URL, FindQatDrv.cmake can find the locally installed QAT package and libraries
Signed-off-by: Miaomiao Liu <miaomiao.liu@intel.com>
Signed-off-by: Hualong Feng <hualong.feng@intel.com>
Mixin is a way to bundle dashboards, prometheus rules and alerts into
jsonnet package. Shifting to mixin will allow easier integration with
monitoring automation that some users may use.
This commit moves `/monitoring/grafana/dashboards` and
`/monitoring/prometheus` to `/monitoring/ceph-mixin`. Prometheus alerts
was also converted to Jsonnet using an automated way (from yaml to json
to jsonnet). This commit minimises any change made to the generated files
and should not change neithers the dashboards nor the Prometheus alerts.
In the future some configuration will also be added to jsonnet to add
more functionalities to the dashboards or alerts (i.e.: multi cluster).
Fixes: https://tracker.ceph.com/issues/53374
Signed-off-by: Arthur Outhenin-Chalandre <arthur.outhenin-chalandre@cern.ch>
To build with Motr backend, use -DWITH_RADOSGW_MOTR=YES cmake
option. cortx-motr-devel rpm should be installed beforehand.
To connect to Motr cluster, add the following configuration
parameters to ceph.conf:
[client]
...
rgw backend store = motr
motr profile fid = 0x7000000000000001:0x4f
motr ha endpoint = inet:tcp:10.0.0.1@2001
...
[client.rgw.8000]
...
motr my endpoint = inet:tcp:10.0.0.1@5001
motr my fid = 0x7200000000000001:0x29
The correct values for the Motr connection parameters can be
taken from `hctl status` cmd output after Motr cluster is
bootstrapped. In the example above, the values were taken from
the following output:
Profile:
0x7000000000000001:0x4f
Services:
centos8n1
[started] hax 0x7200000000000001:0x6 inet:tcp:10.0.0.1@5001
...
[unknown] m0_client 0x7200000000000001:0x29 inet:tcp:10.0.0.1@5001
Motr pkgs for the build/run can be taken from
https://github.com/Seagate/cortx-motr/releases/tag/2.0.0-rgw.
Co-authored-by: Sining Wu <sining.wu@seagate.com>
Signed-off-by: Andriy Tkachuk <andriy.tkachuk@seagate.com>
* add find_package() support for detecting the existence of
linux/blkzoned.h before using it.
* link against Linux::ZNS for adding the compilation definition of
HAVE_ZNS instead of including it in the global config.h
* move the CMake option closer to where it is used for
better readability. as this option takes effect only if
crimson is compiled.
* make WITH_ZNS an option which depends on the value of
CMAKE_SYSTEM_NAME. it is hidden and off if CMAKE_SYSTEM_NAME
is not "Linux".
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
CMP0127 is a new policy introduced by CMake 3.22. without specifying
the policy, we'd have following warning when configuring the building
system using CMake 3.22:
CMake Warning (dev) at /usr/share/cmake-3.22/Modules/CMakeDependentOption.cmake:84 (message):
Policy CMP0127 is not set: cmake_dependent_option() supports full Condition
Syntax. Run "cmake --help-policy CMP0127" for policy details. Use the
cmake_policy command to set the policy and suppress this warning.
Call Stack (most recent call first):
CMakeLists.txt:255 (CMAKE_DEPENDENT_OPTION)
This warning is for project developers. Use -Wno-dev to suppress it.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
This commit adds the ZNSSegmentManager, so SeaStore can
interface with ZNS devices using the linux/blkzoned
library.
Signed-off-by: Joseph Sawaya <jsawaya@redhat.com>
Whereas new LevelDB packages are build with -fno-rtti and break our
attempts to compile against them,
and whereas LevelDB has been deprecated for some time, with the Ceph
team expending great effort to migrating OSDs off of it,
let it be therefore removed.
Signed-off-by: Adam C. Emerson <aemerson@redhat.com>
Fixing build conflicts with latest sal multipart/writer changes.
Also enable WITH_RADOSGW_DBSTORE option by default.
Signed-off-by: Soumya Koduri <skoduri@redhat.com>
libcls_kvs was introduced back in
73d016fdb3, but we don't have an internal
user so far. to reduce the build time. let's disable the build of it by
default.
Signed-off-by: Kefu Chai <kchai@redhat.com>
- ubuntu focal ships libcryptsetup-dev (2:2.2.2),
- centos 8 app stream comes with cryptsetup-devel-2.3.3.
- openSUSE Leap 15.3 packages libcryptsetup-devel-2.3.4
- openSUSE Leap 15.2 packages libcryptsetup-devel-2.0.5
so we can drop the support for libcryptsetup < 2.0.5
see also ea3c1bfb9e
Signed-off-by: Kefu Chai <kchai@redhat.com>
When running dbstore as RGW backend, use the logging mechanism
and config values provided by default by RGW.
For other tests, set logfile and loglevel to the input values provided.
Signed-off-by: Soumya Koduri <skoduri@redhat.com>
As part of Zipper, adding support for DB backend (using SQLite) for Stackable RGW.
The base class methods implemented are generic which could be extended to any backend database, not just SQLite.
More details on design/implementation can be found at -
https://docs.google.com/document/d/1xCoHT5DCujqbe1pnEfYpSaSqiBcW8z87CgQCC5LivOo/edit#
Current status:
[Done]
- User related APIs
- Bucket APIs
- Testcases (using Gtest) to test the DBStore APIs
[Not handled in the first pass]
- Quota
- Usage Stats
- Swift Users
- Multiple Zones/Zonegroups
[WIP]
- Object APIs
Signed-off-by: Soumya Koduri <skoduri@redhat.com>
the upstream project of OpenLDAP is named "OpenLDAP", so rename OPENLDAP to
OpenLDAP for better readability.
Signed-off-by: Kefu Chai <kchai@redhat.com>
add_definitions() is for adding "-D" define flags, while "-include" does
not define flags, so let's be explicit and use add_compile_options()
instead.
this change partially reverts 5fb90bb796.
back then, we were using ubuntu bionic for building windows packages.
but since we've switched to ubuntu focal, where cmake 3.16 is available,
there is no reason to stick with add_definitions() anymore.
Signed-off-by: Kefu Chai <kchai@redhat.com>
since we dropped the support of bionic, we now have the luxury of using
newer CMake! and by using CMake 3.16, we now have access to
* add_compile_definitions(), which was introduced in cmake 3.12
also, drop the comment of
> remove cmake/modules/FindPython* once 3.12 is required
because we need to support python 3.10 in future, better off keeping
the FindPython files around, so we can backport cmake changes from
upstream when necessary.
we are allowed to bump up the CMake's required to 3.16, because:
- ubuntu focal ships with cmake 3.16.3
- RHEL/CentOS8's AppStream has cmake 3.18
Signed-off-by: Kefu Chai <kchai@redhat.com>
ceph::allocator was originally introduced to address
https://tracker.ceph.com/issues/39703, so that if tcmalloc < 2.6.2
detected, the homebrew allocator is used. otherwise std::allocator would
use the aligned_alloc() function which was not implemented by tcmalloc <
2.6.2. but the fix in tcmalloc implementing aligned_alloc() was
introduced in https://github.com/gperftools/gperftools/commit/d406f228.
that fix was included since gperftools 2.6.2.
- CentOS/RHEL8 includes gperftools 2.7,
- fedora 33 includes gperftools 2.8,
- ubuntu/focal comes with libgoogle-perftools-dev 2.7
- ubuntu/bionic ships libgoogle-perftools-dev 2.5. but since we
detect libtcmalloc 2.6.2, when building on bionic, JeMalloc
or libc allocator is used as fallback.
Signed-off-by: Kefu Chai <kchai@redhat.com>
The Windows build is hitting linking errors after
bumping the Boost version to 1.75. The issue is that Boost
is now setting the zlib dependecy using INTERFACE_LINK_LIBRARIES,
which means that it's no longer located using the standard
"find_package" mechanism.
In order for the linker to locate zlib, we'll add it to the
linker search path.
[1] https://github.com/boostorg/boost_install/issues/47
Signed-off-by: Lucian Petrut <lpetrut@cloudbasesolutions.com>
it does not depend on WITH_MGR_DASHBOARD_FRONTEND, which is disabled by
default and is used for enable/disable the inclusion of dashboard
support. while root client is used by orchestrator. so it should depend
on WITH_MGR not WITH_MGR_DASHBOARD_FRONTEND.
this change addresses the regression introduced by
1003f1ffee
Signed-off-by: Kefu Chai <kchai@redhat.com>
extract the options in common/options.cc into separate .yaml.in
files, and preprocess them using CMake before translating them into .cc
files using a python script.
this change paves the road to render the options using sphinx, and
will allow us to further annotate the options to include more metadata.
also, a this YAML file can be consumed by applications like dashboard
and Sphinx to consume these metadata in a simpler way.
* use @variable-name@ for substituting the variables in .yaml.in file
* use cmake variable of `mgr_disabled_modules` instead of C macro
to define `mgr_disabled_modules` in global.yaml.in
* debian/control, ceph.spec.in, win32_deps_build.sh: add python3-yaml
as build dep
* add y2c.py (short for YAML to C++) to translate .yaml to .cc file
* common/options/*.yaml.in: extract and split options into .yaml.in
files, the subvars in it is then replaced with CMake variables,
and copied to the corresponding .yaml files
* include/config-h.in.cmake: remove MGR_DISABLED_MODULES, as it
is not a CMake variable.
Signed-off-by: Kefu Chai <kchai@redhat.com>
