Make this mon_warn code clearer since it involves 2 values
Code used mon scrub interval instead of pg scrub interval
Rename config values to include _pg_ and ratio to make it more clear
Fix scrub warniing handling use per-pool intervals when specified
Fixes: http://tracker.ceph.com/issues/37264
Signed-off-by: David Zafman <dzafman@redhat.com>
These were never implemented. They can be added back if they are
implemented and shown to help performance.
Signed-off-by: Josh Durgin <jdurgin@redhat.com>
* refs/pull/25973/head:
qa: use simpler fs fail to bring fs down
MDSMonitor: add fs fail command
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Douglas Fuller <dfuller@redhat.com>
* refs/pull/25849/head:
qa/suites/rados/upgrade: one mon per node, and enable-msgr2 at end
qa/rados/thrash-old-clients: avoid msgr2
mon: make bootstrap rank check more robust
mon: clean up probe debug output a bit
msg/async: use v1 for v1 <-> [v2,v1] peers
msg/async/AsyncMessenger: drop single-use _send_to
mon/HealthMonitor: raise MON_MSGR2_NOT_ENABLED if mons not bound to msgr2
doc/rados/operations/health-checks: document MON_* health warnings
mon/MonMapMonitor: add 'mon enable-msgr2' command
mon: respawn if rank addr changes
mon/MonMap: calc_addr_mons() after setting rank addrvec
Reviewed-by: Ricardo Dias <rdias@suse.com>
This command sets the fs as not joinable and fails all ranks. This is a simpler
command than the typical sequence: (a) set fs not joinable; (b) iterate through
and fail ranks. It also does this in a single FSMap update.
Fixes: http://tracker.ceph.com/issues/37085
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
If the ms_bind_msgr2 option is enabled, and all mons are nautilus,
raise a health alert if any mons aren't bound to msgr2 addresses.
Whitelist tests that mon_bind_addrvec=false or mon_bind_msgr2=false.
Signed-off-by: Sage Weil <sage@redhat.com>
* refs/pull/25633/head:
mgr/rook: allow service describe and service ls to display nfs services
mgr/rook: add support for adding NFS gateways
mgr/orchestrator_cli: add support for adding NFS gateways
mgr/orchestrator_cli: convert service add/rm commands to be type-specific
mgr/rook: add decorator for add_stateless_service
mgr/rook: add a context manager instead of open-coding exception handling
Reviewed-by: Ricardo Dias <rdias@suse.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Sebastian Wagner <swagner@suse.com>
Add necessary commands to orchestrator_cli to allow it to deploy a
cluster of NFS servers. Note that we have to be able to specify the pool
and an optional namespace for the recovery backend objects.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
When adding services, we often need different sets of arguments
depending on the service type. Convert the "service add" and "service
rm" commands into separate commands for each service type.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
The peer addr stuff via asok is a bit fragile because the user must
provide an exact addrvec matching the mon to avoid some weirdness, but
it's rarely used, and the fix would be some robustness/tolerance in the
messenger that is a bigger project than this.
Signed-off-by: Sage Weil <sage@redhat.com>
* refs/pull/25009/head:
librbd: stringify locker name with get_legacy_str()
osdc/Objecter: fix list_watchers addr rendering to match legacy
test/crimson: disable unittest_seastar_messenger test
msg/msg_types: encode entity_addr_t TYPE_ANY as TYPE_LEGACY for pre-nautilus
client: make blacklist detection handle TYPE_ANY entries
mon/OSDMonitor: maintain compat output for 'blacklist ls'
client: maintain compat for {inst,addr}_str in status dump
qa/tasks/ceph_manager: compare osd flush seq #'s as ints
qa/suites/fs: make use of simple.yaml where appropriate
qa/msgr: move msgr factet into generic re-usable dir
crimson: fix monmap build for seastar
doc/start/ceph.conf: trim the sample ceph.conf file
doc/rados/operations: only describe --public-{addr,network} method for adding mons
PendingReleaseNotes: deprecate 'mon addr'
doc: fix some 'mon addr' references
doc/rados/configuration: fix some 'mon addr' references
doc/rados/configuration/network-config-ref: revise network docs somewhat
doc/rados/configuration/network-config-ref: remove totally obsolete section
qa/suites/rados: replace mon_seesaw.py task with a small bash script
qa/suites/fs/upgrade: don't bind to v2 addrs
qa/tasks/mon_thrash: avoid 'mon addr' in mon section
mon/MonClient: disable ms_bind_msgr2 if NAUTILUS feature not set
osd/OSDMap: maintain compat addr fields
msg/msg_types: add get_legacy_str()
mds/MDSMap.h: maintain compat addr field
mon/MgrMap: maintain compat active_addr field
mon/MonClient: reconnect to mon if it's addrvec appears to have changed
qa/tasks/ceph.conf.template: increase mon_mgr_mkfs_grace
msg/async/ProtocolV2: fill in IP for all peer_addrs
msg/async: print all addrs on debug lines
mon/MonMap: no noname- mon name prefix when for_mkfs
ceph-monstore-tool: print initial monmap
msg/async/ProtocolV2: advertise ourselves as a v2 addr when using v2 protocol
msg/async: assert existing protocol matches current protocol
msg/async: add missing modelines
mon/MonMap: add missing modeline
vstart.sh: put mon addrs in mon_host, not 'mon addr'
msg/async: better debug around conn map lookups and updates
mon/MonClient: dump initial monmap at debug level 10
qa/standalone/osd/osd-fast-mark-down: use v1 addr w/ simplemessenger
qa/tasks/ceph: set initial monmap features with using addrvec addrs
monmaptool: add --enable-all-features option
qa/tasks/ceph: only use monmaptool --addv if addr has [,:v]
qa/tasks/ceph_manager: make get_mon_status use mon addr
qa/tasks/ceph: keep mon addrs in ctx namespace
mon/OSDMonitor: log all osd addrs on boot
msg/simple: behave when v2 and v1 addrs are present at target
mon/MonClient: warn if global_id changes
msg/Connection: add warning/note on get_peer_global_id
mds/MDSDaemon: clean up handle_mds_map debug output a bit
qa/suites/rados/upgrade: debug mds
mds/MDSRank: improve is_stale_message to handle addrvecs
msg/async: make loopback detect when sending to one of our many addrs
qa/suites/rados/upgrade: no aggressive pg num changes
mon/OSDMonitor: require nautilus mons for require_osd_release=nautilus
mon/OSDMonitor: require mimic mons for require_osd_release=mimic
qa/suites/rados/thrash-old-clients: use legacy addr syntax in ceph.conf
msg/async: preserve peer features when replacing a connection
qa/tasks/ceph.py: move methods from teuthology.git into ceph.py directly; support mon bind * options
mon/MonMap: adjust build_initial behavior for mkfs vs probe
mon/MonMap: improve ambiguous addr behavior
qa/suites/rados/upgrade: spread mons a bit
qa/rados/thrash-old-clients: keep mons on separate hosts
qa/standalone/mon/misc.sh: tweak test to be more robust
qa/tasks/mon_seesaw: expect v1/v2 prefix in addr
osd/OSDMap: fix is_blacklisted() check to assume type ANY
mon/OSDMonitor: use ANY addr type for blacklisting
mon/msg_types: TYPE_V1ORV2 -> TYPE_ANY
qa/workunits/cephtool: fix blacklist test
qa/suites/upgrade: install old version with only v1 addrs
common/options: by default, bind to both msgr v1 and v2 addresses
vstart.sh: add --msgr1, --msgr2, --msgr21 options
msg/async/ProtocolV2: be flexible with server identity check
msg/msg_types: fix entity_addrvec_t::parse() with null end arg
qa/suites/rados/basic/msgr: no msgr2 addrs in initial monmaps
qa/tasks/ceph: add 'mon_bind_addrvec' and 'mon_bind_msgr2' options
monmaptool: add --addv argument to pass in addrvec directly
qa/suites/rados/basic/msgr: do not use msgr2 with simplemessenger
qa/suites/rados/basic/msgr: async is not experimental
messages/MOSDBoot: fix compat with pre-nautilus
mon/MonMap: allow v1 or v2 to be explicitly specified along with part
msg/msg_types: allow parsing of IPs without assuming v1 vs v2
msg/msg_types: default parse to v2 addrs
msg: standarize on v1: and v2: prefixes for *all* entity_addr_t's
vstart.sh: use msgr2 by default
mon/MonMap: remove get_addr() methods
ceph-mon: adjust startup/bind/join sequence to use addrs
mon: use MonMap::get_addrs() (instead of get_addr())
mon/MonClient: change pending_cons to addrvec-based map
mon/MonMap: fix set_addr() caller, kill wrapper
mon/MonMap: remove addr-based add()
monmaptool: fix --add to do either legacy or msgr2+legacy
monmaptool: clean up iterator use a bit
mon/MonMap: handle ambiguous mon addrs by trying both legacy and msgr
mon/MonMap: take addrvec for set_initial_members
mon/MonMap: use addrvecs for test instances
mon: pass addrvec via MMonJoin
mon/MonmapMonitor: fix 'mon add' to populate addrvec
mon/MonMap: addr -> addrvec
msg/async/ProtocolV2: only update socket_addr if we learned our addr
osd: go active even if mon only accepted our v1 addr
test/msgr: add test for msgr2 protocol
msg/async/ProtocolV2: share socket_addr and all addrs during handshake
msg/async: print socket_addr for the connection
msg/async: msgr2 protocol placeholder
msg/async: move ProtocolV1 class to its own source file
msg/async: keep listen addr in ServerSocket, pass to new connections
msg/async/AsyncMessenger: fix set_addr_unknowns
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
