Instead of blocking the whole port range (which
might make OSDs running on that node collateral
damage), read the MDS's port out of the MDS map
and just block that.
Signed-off-by: John Spray <john.spray@redhat.com>
...because this is the one that will store up
changes to roll back during teardown.
Doing this makes it easy to run lots of test cases
togeher in a single teuthology run, raher than
setting up/tearing down the ceph cluster for each
on.
Signed-off-by: John Spray <john.spray@redhat.com>
Now that we have more of these cases, there was lots
of duplication in setup and teardown. For some tests
the "reset everything" setup/teardown is overkill,
but it's harmless.
Signed-off-by: John Spray <john.spray@redhat.com>
Since the new 'tell' for the MDS was introduced,
caps have to have the '*' to permit running remote
administrative commands.
Signed-off-by: John Spray <john.spray@redhat.com>
Now that #10387 is fixed in master, we can tighten
up this test to ensure that the expected deletions
are happening.
Signed-off-by: John Spray <john.spray@redhat.com>
This reverts commit 26a33c3a5a.
This is tryign to create the archive dir on the remote host:
2014-12-29T12:15:30.213 INFO:teuthology.orchestra.run.plana31:Running: 'mkdir -p /var/lib/teuthworker/archive/sage-2014-12-29_11:40:52-rgw-next---basic-multi/683052'
2014-12-29T12:15:30.231 ERROR:teuthology.contextutil:Saw exception from nested tasks
Traceback (most recent call last):
File "/home/teuthworker/src/teuthology_master/teuthology/contextutil.py", line 28, in nested
vars.append(enter())
File "/usr/lib/python2.7/contextlib.py", line 17, in __enter__
return self.gen.next()
File "/var/lib/teuthworker/src/ceph-qa-suite_next/tasks/s3readwrite.py", line 241, in run_tests
ctx.cluster.only(client).run(args=['mkdir', '-p', archive_dir])
File "/home/teuthworker/src/teuthology_master/teuthology/orchestra/cluster.py", line 64, in run
return [remote.run(**kwargs) for remote in remotes]
File "/home/teuthworker/src/teuthology_master/teuthology/orchestra/remote.py", line 128, in run
r = self._runner(client=self.ssh, name=self.shortname, **kwargs)
File "/home/teuthworker/src/teuthology_master/teuthology/orchestra/run.py", line 368, in run
r.wait()
File "/home/teuthworker/src/teuthology_master/teuthology/orchestra/run.py", line 106, in wait
exitstatus=status, node=self.hostname)
CommandFailedError: Command failed on plana31 with status 1: 'mkdir -p /var/lib/teuthworker/archive/sage-2014-12-29_11:40:52-rgw-next---basic-multi/683052'
...but it should only be on the local host.
This tests:
* The new 'flush journal' asok command
* That the resulting on disk structures are as expected
* That cephfs-journal-tool is happy with the result
Fixes: #9881
Signed-off-by: John Spray <john.spray@redhat.com>
The format of the output of --op list was changed to include the PG to
which the object belong. It simplifies the loop in
ceph_objectstore_tool.py.
http://tracker.ceph.com/issues/10376Fixes: #10376
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Previously was always using the default values of things
so querying mon instead of the appropriate service
worked fine. However, for things we might want to
update on a per-test basis we need to go ask the
correct service what the setting really is.
Needed for osd_mon_report_interval_max in the ENOSPC
testing.
Signed-off-by: John Spray <john.spray@redhat.com>
Fixes: #9892
Need to wait through the usage interval before trimming usage, otherwise we might not
remove all pending usage info.
Backport: dumpling, firefly, giant
Signed-off-by: Yehuda Sadeh <yehuda@redhat.com>
(cherry picked from commit dd09ecbfab8a659f3faaf879a52849caab5e8e8e)
It now checks for 'notify1' and 'notify2' strings, allowing it to work
on both old and new versions of rados watch command.
Signed-off-by: Sage Weil <sage@redhat.com>
Leave the legacy handling out in cephfs_setup, move
the filesystem creation stuff into Filesystem. I
anticipate this being the right place for it if/when
we have tests that want to do 'fs rm' 'fs new' type
cycles within themselves.
Signed-off-by: John Spray <john.spray@redhat.com>
This was tripping over the recent commit 42c85e80
in Ceph master, which tightens the limits on
acceptable PG counts per OSD, and was making
teuthology runs fail due to never going clean.
Rather than put in a new hardcoded count, infer
it from config. Move some code around so that
the ceph task can get at a Filesystem object
to use in FS setup (this already has conf-getting
methods).
Signed-off-by: John Spray <john.spray@redhat.com>
New CephFS tests for MDS's auto repair functions. (So far the only
test case is verify/repair backtrace on fetch dirfrag)
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The s3readwrite.py task formerly wrote too much output while excuting.
It now saves the data on the local machine in either the archive
directory or in /tmp if no archive directory is specified.
The new file contains a client name and timestamp in its name.
Once all processing has completed, that file is saved locally.
Fixes: 9117
Signed-off-by: Warren Usui <warren.usui@inktank.com>
Create an erasure coded pool and run tests on it. The list of PGs is
adapted to contain the shard id.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Instead of hardcoding 12 use a configuration option that defaults to
12. It is handy during development to lower the number to 4 and speed up
the test cycle.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Move code out of the task into function. Also remove the "REP" specifics
from helper functions that could also be used for erasure coded pools.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
When an hinfo_key attribute is found, assume an erasure coded object and
verify set-attr/get-attr works as expected by removing its content and
restoring it.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
For erasure coded pools to be tested, the json object representation
must be preserved for all PG because they are all different. The
internal representation is changed from
db[name]["pgid"] = pg
db[name]["json"] = objjson
to a per pg map:
db[name].setdefault("pg2json", {})[pg] = objjson
and the rest of the code is modified to adapt accordingly.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
The osd dump command displays pool types using numerics instead of
symbolic names. Create constants in the CephManager class to use instead
of numbers.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
