The boost mt code uses uninitialized memory for extra randomness,
which is a bad idea in general but more importantly makes valgrind
unhappy. Use /dev/urandom instead.
Unfortunately this introduces a link time dependency.. meh!
Fixes: #12736
Signed-off-by: Sage Weil <sage@redhat.com>
If the mimecap RPM or mime-support DEB is not installed, then the
/etc/mime.types file is not present on the system. RGW attempts to read
this file during startup, and if the file is not present, RGW logs an
error:
ext_mime_map_init(): failed to open file=/etc/mime.types ret=-2
Make the radosgw package depend on the mailcap/mime-support packages so
that /etc/mime.types is always available on RGW systems.
http://tracker.ceph.com/issues/11864Fixes: #11864
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
The postrotate script in src/logrotate.conf uses the which and find utilities
to do its work. Although logrotate itself is only a Recommends, I think which
and find are so ubiquitous that it makes sense to have them as hard
dependencies.
Also, I checked and the package names which and findutils are the same on all
the RPM distros we are currently targeting in the spec file.
In Debian, find is also in a package called findutils while the package
containing 'which' is called debianutils.
Signed-off-by: Nathan Cutler <ncutler@suse.com>
Before this patch, the command 'logrotate -f /etc/logrotate.d/ceph'
was generating an error "Failed to reload ceph.target: Job type reload is not
applicable for unit ceph.target".
Before we issue systemctl reload, check that there is at least
one active ceph-* service. (The hyphen is significant.)
Since we use grep, make the grep package a dependency.
http://tracker.ceph.com/issues/12173Fixes: #12173
Signed-off-by: Tim Serong <tserong@suse.com>
Signed-off-by: Lars Marowsky-Bree <lmb@suse.com>
Signed-off-by: Nathan Cutler <ncutler@suse.com>
Given ceph's reputation for voluminous logs, it makes sense for
logrotate to be a hard dependency for all distros.
Signed-off-by: Nathan Cutler <ncutler@suse.com>
The semantic and interface of get_pg are the same, that avoids
duplication and the ceph-helpers.sh version is tested and documented.
Make the ceph-test package dependent on xmlstarlet because it is
needed by ceph-helpers.sh.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
When ceph-objectstore-tool was moved from ceph-test to
ceph by 61cf5da0b5, the ceph package in
debian/control was updated accordingly, as recommended by
https://www.debian.org/doc/debian-policy/ch-relationships.html#s-replaces
The same must be done for the ceph-dbg package because
/usr/lib/debug/usr/bin/ceph-objectstore-too is no longer in
ceph-test-dbg.
Although the change was merged may 6th, 2015
8f23382064, teuthology jobs were not
always failing because packages were not systematically upgraded during
the installation. The missing dependencies that were responsible for
this upgrade problem were fixed by
f898ec1e4e on may 18th, 2015 and all
upgrade tests relying on ceph-*-dbg packages started to fail
systematically after this date.
http://tracker.ceph.com/issues/11546Fixes: #11546
Signed-off-by: Loic Dachary <ldachary@redhat.com>
Prior to this commit, if a user installed the "ceph-common" Debian
package without installing "ceph", then /usr/bin/ceph would crash
because it was missing the ceph_argparse library.
Ship the ceph_argparse library in "ceph-common" instead of "ceph". (This
was the intention of the original commit that moved argparse to "ceph",
2a23eac549)
http://tracker.ceph.com/issues/11388 Refs: #11388
Reported-by: Jens Rosenboom <j.rosenboom@x-ion.de>
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Debian's debug packages ought to depend on their respective binary
packages. This was the case for many of our ceph packages, but it was
not the case for ceph-test-dbg or rest-bench-dbg.
Add the dependencies on the relevant binary packages, pinned to
"= ${binary:Version}" per convention.
http://tracker.ceph.com/issues/11673Fixes: #11673
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
This change ensures that the ceph-objectstore-tool utility is present on
all OSDs. This makes it easier for users to run this tool to do manual
debugging/recovery in some scenarios.
http://tracker.ceph.com/issues/11376 Refs: #11376
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
* move rst files from doc/man/8 into man/8
* extract man_pages setting for sphinx from doc/conf.py to man/conf.py
* generate all man pages in `make install`
* add python-sphinx to Build-Depends
* check for sphinx-build in `configure`
* run changed rst files through sphinx-build in `make check`
Signed-off-by: Kefu Chai <kchai@redhat.com>
On Debian, ceph-mds was split out into its own package in
9d6013e0db, but the /var/lib/ceph/mds
directory was not moved along with the rest of the mds pieces.
The /var/lib/ceph/mds directory is only necessary if a user has
installed ceph-mds. Move it to the ceph-mds subpackage.
http://tracker.ceph.com/issues/10587 Refs: #10587
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
The zlib1g-dev is installed indirectly for Ubuntu 12.04 or Ubuntu 14.04
but it is only suggested in Debian/jessie. Adding it to the
Build-depends is redundant and harmless for Ubuntu and resolves the
missing dependency for Debian.
http://tracker.ceph.com/issues/11068Fixes: #11068
Signed-off-by: Loic Dachary <ldachary@redhat.com>
We should ship the RBD udev rules in the same package that ships
/usr/bin/rbd. This package happens to be ceph-common, so move the udev
rules there.
The udev rules rely on the ceph-rbdnamer utility, so move that utility
and its man page as well.
http://tracker.ceph.com/issues/10864 Refs: #10864
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
- move argparse to ceph-common
- split out rados, rbd, and cephfs bindings into their own packages
- keep python-ceph as a metapackage
Signed-off-by: Sage Weil <sage@redhat.com>
There really should be a better way than this to ensure the right things are installed for make check.
The existing list in ceph.spec.in has been re-sorted, just as the debian/control is
Andrew Bartlett
python-virtualenv is required to run make check and xmlstarlet is useful
to develop shell base tests using ceph --format xml osd dump.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
These binaries haven't landed in Ubuntu, but they are in
sid and jessie for arm64. On Saucy I've installed them by
hand from ports.ubuntu.com and things seems pretty swell.
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
Add libkrbd libtool convenience library to provide an interface for
mapping and unmapping rbd images programmatically. This will be used
by the rbd binary itself and the librbd_fsx testing tool.
libkrbd takes care of the kernel module stuff (common/module.h) and
makes use of libudev to be able to properly wait for block device
creation and deletion and tell which block device got assigned by the
kernel to the newly created mapping.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
The older versions of ceph-common (ceph CLI, in particular) can't talk to
newer clusters. The primary change happened with dumpling when the new
CLI and rest-api changes were made. Although in reality ceph doesn't
care what version of ceph-common is installed, in practice this forces
ceph-common to get upgraded along with ceph and avoids some user pain.
Fixes: #7641
Signed-off-by: Sage Weil <sage@inktank.com>
Introduce XfsFileStoreBackend class, currently the only filestore
backend implementing SETALLOCHINT op. This commit adds a build-time
dependency on libxfs as xfs-specific ioctl (XFS_IOC_FSSETXATTR /
XFS_XFLAG_EXTSIZE) is used to implement the new set_alloc_hint()
method.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
python-ceph does not require requests, but ceph-common does (for ceph-brag).
Signed-off-by: Dan Mick <dan.mick@inktank.com>
(cherry picked from commit 9a0ef6a181)
Because the gitbuilder build environment does not read the build depends
from the packages and needs to be updated independantly.
Signed-off-by: Loic Dachary <loic@dachary.org>
make check runs vstart.sh to setup a cluster from source and it misses
the python-argparse library as well as uuidgen otherwise it will fail
with:
./vstart.sh: 460: uuidgen: not found
...
Error: Import No module named argparse
Signed-off-by: Loic Dachary <loic@dachary.org>
Currently the way 'rbd unmap' translates a user-provided block device
into an rbd id is it matches the major number of the specified device
against /sys/bus/rbd/devices/<id>/major for each rbd mapping and
declares success on the first match. This works for both entire disks
and partitions, because under the current device number allocation
scheme, each mapping means a new major number.
In preparation for support for single-major device number allocation
scheme, which would require matching both major and minor numbers, make
sure to always match against entire disk device numbers, by converting
the specified device major:minor pair into wholdedisk major:minor pair.
To achive that, use the libblkid library, which accomplishes this goal
by walking stable sysfs structures.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Run parse_json_funcsigs against the builtin commands found
in mon/MonCommands.h. Although it does not provide for a full
validation, it will detect some degenerate cases.
It is expected to raise if a space is missing at the end of an option
specification ( see https://github.com/ceph/ceph/pull/585 ) and this
case is tested. New tests of the same kind can be added whenever an
undetected error is found. Ideally a validation function is implemented
and it would be updated ( with an associated test ) when a new
pathological case is found.
The json string given to parse_json_funcsigs is obtained from
the support program get_command_descriptions.
The python-nose dependencies are added to the build requirements in
debian/control and ceph.spec.in because make check should always be run
at built time.
http://tracker.ceph.com/issues/6274 refs #6274
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Joao Eduardo Luis <joao.luis@inktank.com>
Signed-off-by: Loic Dachary <loic@dachary.org>
The fuse-utils package was deprecated a while ago.
Switch the primary dependency for fuse tools to use
the preferred 'fuse' package.
Signed-off-by: James Page <james.page@ubuntu.com>
Remove ceph-legacy-cli
Include ceph in proper places to get it built/installed/packaged
Make ceph-common (deb) or ceph (rpm) pkg depend on python-ceph pkg
Signed-off-by: Dan Mick <dan.mick@inktank.com>
...indirectly via ceph-common. We get bad behavior when they diverge, I
think because of libcommon.la being linked both statically and dynamically.
Fixes: #4997
Backport: cuttlefish, bobtail
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Gary Lowell <gary.lowell@inktank.com>
Squeeze requires the cryptsetup package which has been renamed
cryptsetup-bin in later versions. Allow either package to
satisfy the dependency.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
Two fixes for Centos 6.3 and other systems with udev versions
prior to 172. The disk peristant name using the GPT UUID does
not exist, so use the by_path persistent name instead for the
journal symlink.
The gpt label fields are not available for use in udev rules. Add
ceph-disk-udev wrapper script that extracts the partition
type guid from the label and calls ceph-disk-activate if it is
a ceph guid type. (Bug #4632)
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
Add libboost-system-dev (bug #4725).
Add hdparm to rpm installation requirements. The hdparm
command is used to determin if write-caching is enabled on
the journal device.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
The ceph-mds.conf file moced from the ceph package to the
ceph-mds package. Add replaces/breaks statements to the
control file to handle this on upgrade.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
ceph-disk-prepare and ceph-disk-activate use the with statement,
str.format, and possibly other new features from python 2.6.
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
python-ceph complains when installed to debian squeeze about the 'with'
statement. Apparently installation tries to install the python-ceph package for
python 2.5, which does not support the 'with' statement natively.
Signed-off-by: Filippos Giannakos <philipgian@grnet.gr>
Remove request for libleveldb1 version > 1.2. Every libleveldb1 package
should work, otherwise the SO name/version of the library should change.
Fixes: #3945
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Dynamically link to the leveldb installed on the system rather than
statically linking ceph copy. Remove the --with-system-leveldb config
option, and add a requirement for leveldb libraries for rpm and debian
packages. Bug 3945.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
Change the filter in logrotate to use sed instead of perl, and remove the
package dependency on perl.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
There was already a dependency on python in the debian control file,
a similar dependency was added to the rpm spec file. perl is needed
for the logrotate script, so a dependecy was on perl wass added to
both. Bug 3768.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
The ceph test programs that are now being built by default require the junit
and libboost-program-options packages. These have been added to the build
dependecies in the debian control file.
Signed-off-by: Gary Lowell <gary.lowell@inktank.com>
Creates libceph1-java package that contains
the libcephfs Java wrappers .jar file and the
JNI library.
Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
Previously, ceph-disk-* would only let you use a journal that was a
file inside the OSD data directory. With this, you can do:
ceph-disk-prepare /dev/sdb /dev/sdb
to put the journal as a second partition on the same disk as the OSD
data (might save some file system overhead), or, more interestingly:
ceph-disk-prepare /dev/sdb /dev/sdc
which makes it create a new partition on /dev/sdc to use as the
journal. Size of the partition is decided by $osd_journal_size.
/dev/sdc must be a GPT-format disk. Multiple OSDs may share the same
journal disk (using separate partitions); this way, a single fast SSD
can serve as journal for multiple spinning disks.
The second use case currently requires parted, so a Recommends: for
parted has been added to Debian packaging.
Closes: #3078Closes: #3079
Signed-off-by: Tommi Virtanen <tv@inktank.com>
Ext4 as a default is a bad choice, as we don't perform enough QA with
it. To use XFS as the default for ceph-disk-prepare, we need to depend
on xfsprogs.
btrfs-tools is already recommended, so no change there. If you set
osd_fs_type=btrfs, and don't have the package installed, you'll just
get an error message.
Signed-off-by: Tommi Virtanen <tv@inktank.com>
Uses gdisk, as it seems to be the only tool that can automate GPT uuid
changes. Needs to run as root.
Adds Recommends: gdisk to ceph.deb.
Closes: #2547
Signed-off-by: Tommi Virtanen <tv@inktank.com>
Also adjust the recommends and depends, so that libcephfs1 and ceph-fuse
hang off of ceph-mds instead of ceph.
Signed-off-by: Sage Weil <sage@inktank.com>
We depend on leveldb, which only builds on
amd64 armel armhf i386 ia64 mipsel
Reported-by: Laszlo Boszormenyi (GCS) <gcs@debian.hu>
Signed-off-by: Sage Weil <sage@inktank.com>
This puts in place an init script and a command it runs to save a
kernel core dump to a remote server when a panic or other kernel
failure occurs. The content of a crash file generated by the
"kdump" init script (which uses the Ubuntu "apport" kernel_crashdump
command) is re-packaged and copied (via scp) to a remote server
specified by variables in /etc/default/ceph-kdump-copy. This
packaging (as well as the work done by the apport script) is done
on the next boot of the kernel following a crash.
Note: Although the init script, its config file, and shell script
are known to work, the packaging of these things should not be
expected to be. I (now) know, for example, that the init script
belongs in src/init-ceph-kdump-copy.in if it is to follow the
pattern used by the ceph init script. And there are likely other
problems with the build/install portions of this patch.
Signed-off-by: Alex Elder <elder@dreamhost.com>
We are cheating with the shared libs by making small API changes without
bumping the soname. Bind users to a matching version to minimize user
pain. When the APIs become fully stable these will need to go away.
Fixes: #1354
Signed-off-by: Sage Weil <sage@newdream.net>
Build-depend on python-support. Add binary package
python-ceph, making it contain all the ceph python
packages, regardless of their name; the modules are
too small to deserve their own debs.
Make python-ceph depend only on librados2 for now.
librgw is not packaged yet.
Dropping unnecessary build-dep on python-dev, that's
only needed for compiling C extensions, and we're using
ctypes.
Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
So says dpkg-gencontrol, at least:
warning: dpkg-gencontrol: Depends field of package librados-dev: unknown substitution variable ${shlibs:Depends}
...
Signed-off-by: Sage Weil <sage.weil@dreamhost.com>
