It's now "1/2 unfound":
1/2 objects unfound (50.000%)
..presumably due to the rbd pool init creating the rbd_directory.
Signed-off-by: Sage Weil <sage@redhat.com>
- no need for the default pool size
- no initial osds or it will collide with setup_osds later
- no need for rbd pool at all
Signed-off-by: Sage Weil <sage@redhat.com>
* refs/pull/26794/head:
mon/MgrMonitor: only try to update always_on_modules if >= NAUTILUS
qa/standalone/mon/msgr-v2-transition: add some tests for enabling msgr v2
mon/MonmapMonitor: add 'ceph mon set-addrs <name> <addrvec>' command
Revert "mon/MonClient: disable ms_bind_msgr2 if NAUTILUS feature not set"
mon/OSDMonitor: use legacy_equals to compare osd addrs
msg/msg_types: make legacy_equals() symmetrical
mon/MDSMonitor: stop using get_orig_source_inst()
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Neha Ojha <nojha@redhat.com>
'rbd pool init' now does IO. Drop the pool, or change the pool size to 1.
Fixes: http://tracker.ceph.com/issues/38585
Signed-off-by: Sage Weil <sage@redhat.com>
This test introduces a map gap. What *should* happen is that when there is
such a gap, we cannot import. Previously, the test didn't reliably produce
a map gap at all, and didn't check that import failed--it verified that it
passed.
Fix the test so that it reliably produces a gap *and* reports
min_last_epoch_clean to the mon so we can trim. Then verify we fail to
import, but can with --force. But remove the pg again, because if we
force an import with a map gap the osd will refuse to start.
Fixes: http://tracker.ceph.com/issues/38525
Signed-off-by: Sage Weil <sage@redhat.com>
The markdown test is based on marking down a specific number of times, but
the duplicate commands from the CLI may not get absorbed/batched by the
mon, breaking the test. Override the default qa/tasks/workunit.py
behavior of sending dups.
Fixes: http://tracker.ceph.com/issues/38359
Signed-off-by: Sage Weil <sage@redhat.com>
Stopping the osd daemon won't reliably get you HEALTH_WARN or ERR; you have
to make sure it is also marked down.
Signed-off-by: Sage Weil <sage@redhat.com>
Add trigger_deep_scrub osd command for testing
Publish stats when trigger_scrub/trigger_deep_scrub is used for testing
Add optional argument to trigger_scrub/trigger_deep_scrub
for amount of extra time to change last scrub stamps
Signed-off-by: David Zafman <dzafman@redhat.com>
osd: Deny reservation if expected backfill size would put us over bac…
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Neha Ojha <nojha@redhat.com>
There may be a situation where data digest in object info is
inconsistent with that computed from object data, then deep-scrub
will fail even though all three repicas have the same object data.
Fixes: https://tracker.ceph.com/issues/37935
Signed-off-by: Li Yichao <liyichao.good@gmail.com>
* refs/pull/25009/head:
librbd: stringify locker name with get_legacy_str()
osdc/Objecter: fix list_watchers addr rendering to match legacy
test/crimson: disable unittest_seastar_messenger test
msg/msg_types: encode entity_addr_t TYPE_ANY as TYPE_LEGACY for pre-nautilus
client: make blacklist detection handle TYPE_ANY entries
mon/OSDMonitor: maintain compat output for 'blacklist ls'
client: maintain compat for {inst,addr}_str in status dump
qa/tasks/ceph_manager: compare osd flush seq #'s as ints
qa/suites/fs: make use of simple.yaml where appropriate
qa/msgr: move msgr factet into generic re-usable dir
crimson: fix monmap build for seastar
doc/start/ceph.conf: trim the sample ceph.conf file
doc/rados/operations: only describe --public-{addr,network} method for adding mons
PendingReleaseNotes: deprecate 'mon addr'
doc: fix some 'mon addr' references
doc/rados/configuration: fix some 'mon addr' references
doc/rados/configuration/network-config-ref: revise network docs somewhat
doc/rados/configuration/network-config-ref: remove totally obsolete section
qa/suites/rados: replace mon_seesaw.py task with a small bash script
qa/suites/fs/upgrade: don't bind to v2 addrs
qa/tasks/mon_thrash: avoid 'mon addr' in mon section
mon/MonClient: disable ms_bind_msgr2 if NAUTILUS feature not set
osd/OSDMap: maintain compat addr fields
msg/msg_types: add get_legacy_str()
mds/MDSMap.h: maintain compat addr field
mon/MgrMap: maintain compat active_addr field
mon/MonClient: reconnect to mon if it's addrvec appears to have changed
qa/tasks/ceph.conf.template: increase mon_mgr_mkfs_grace
msg/async/ProtocolV2: fill in IP for all peer_addrs
msg/async: print all addrs on debug lines
mon/MonMap: no noname- mon name prefix when for_mkfs
ceph-monstore-tool: print initial monmap
msg/async/ProtocolV2: advertise ourselves as a v2 addr when using v2 protocol
msg/async: assert existing protocol matches current protocol
msg/async: add missing modelines
mon/MonMap: add missing modeline
vstart.sh: put mon addrs in mon_host, not 'mon addr'
msg/async: better debug around conn map lookups and updates
mon/MonClient: dump initial monmap at debug level 10
qa/standalone/osd/osd-fast-mark-down: use v1 addr w/ simplemessenger
qa/tasks/ceph: set initial monmap features with using addrvec addrs
monmaptool: add --enable-all-features option
qa/tasks/ceph: only use monmaptool --addv if addr has [,:v]
qa/tasks/ceph_manager: make get_mon_status use mon addr
qa/tasks/ceph: keep mon addrs in ctx namespace
mon/OSDMonitor: log all osd addrs on boot
msg/simple: behave when v2 and v1 addrs are present at target
mon/MonClient: warn if global_id changes
msg/Connection: add warning/note on get_peer_global_id
mds/MDSDaemon: clean up handle_mds_map debug output a bit
qa/suites/rados/upgrade: debug mds
mds/MDSRank: improve is_stale_message to handle addrvecs
msg/async: make loopback detect when sending to one of our many addrs
qa/suites/rados/upgrade: no aggressive pg num changes
mon/OSDMonitor: require nautilus mons for require_osd_release=nautilus
mon/OSDMonitor: require mimic mons for require_osd_release=mimic
qa/suites/rados/thrash-old-clients: use legacy addr syntax in ceph.conf
msg/async: preserve peer features when replacing a connection
qa/tasks/ceph.py: move methods from teuthology.git into ceph.py directly; support mon bind * options
mon/MonMap: adjust build_initial behavior for mkfs vs probe
mon/MonMap: improve ambiguous addr behavior
qa/suites/rados/upgrade: spread mons a bit
qa/rados/thrash-old-clients: keep mons on separate hosts
qa/standalone/mon/misc.sh: tweak test to be more robust
qa/tasks/mon_seesaw: expect v1/v2 prefix in addr
osd/OSDMap: fix is_blacklisted() check to assume type ANY
mon/OSDMonitor: use ANY addr type for blacklisting
mon/msg_types: TYPE_V1ORV2 -> TYPE_ANY
qa/workunits/cephtool: fix blacklist test
qa/suites/upgrade: install old version with only v1 addrs
common/options: by default, bind to both msgr v1 and v2 addresses
vstart.sh: add --msgr1, --msgr2, --msgr21 options
msg/async/ProtocolV2: be flexible with server identity check
msg/msg_types: fix entity_addrvec_t::parse() with null end arg
qa/suites/rados/basic/msgr: no msgr2 addrs in initial monmaps
qa/tasks/ceph: add 'mon_bind_addrvec' and 'mon_bind_msgr2' options
monmaptool: add --addv argument to pass in addrvec directly
qa/suites/rados/basic/msgr: do not use msgr2 with simplemessenger
qa/suites/rados/basic/msgr: async is not experimental
messages/MOSDBoot: fix compat with pre-nautilus
mon/MonMap: allow v1 or v2 to be explicitly specified along with part
msg/msg_types: allow parsing of IPs without assuming v1 vs v2
msg/msg_types: default parse to v2 addrs
msg: standarize on v1: and v2: prefixes for *all* entity_addr_t's
vstart.sh: use msgr2 by default
mon/MonMap: remove get_addr() methods
ceph-mon: adjust startup/bind/join sequence to use addrs
mon: use MonMap::get_addrs() (instead of get_addr())
mon/MonClient: change pending_cons to addrvec-based map
mon/MonMap: fix set_addr() caller, kill wrapper
mon/MonMap: remove addr-based add()
monmaptool: fix --add to do either legacy or msgr2+legacy
monmaptool: clean up iterator use a bit
mon/MonMap: handle ambiguous mon addrs by trying both legacy and msgr
mon/MonMap: take addrvec for set_initial_members
mon/MonMap: use addrvecs for test instances
mon: pass addrvec via MMonJoin
mon/MonmapMonitor: fix 'mon add' to populate addrvec
mon/MonMap: addr -> addrvec
msg/async/ProtocolV2: only update socket_addr if we learned our addr
osd: go active even if mon only accepted our v1 addr
test/msgr: add test for msgr2 protocol
msg/async/ProtocolV2: share socket_addr and all addrs during handshake
msg/async: print socket_addr for the connection
msg/async: msgr2 protocol placeholder
msg/async: move ProtocolV1 class to its own source file
msg/async: keep listen addr in ServerSocket, pass to new connections
msg/async/AsyncMessenger: fix set_addr_unknowns
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
The teuthology test did not like the change to remove 'mon addr' from
ceph.conf. The standalone script is easier to test.
Note that it avoids mon names 'a', 'b', 'c' since the MonMap::build_initial
uses those.
Signed-off-by: Sage Weil <sage@redhat.com>
Scrub testing requires an orderly control of scrubbing. Most but not
all the time, the duplicate scrub request is ignored because the first
request hasn't finished. Teuthology enables this environment variable
in the workunit handling.
Fixes: https://tracker.ceph.com/issues/36525
Signed-off-by: David Zafman <dzafman@redhat.com>
Use --rmtype snapmap with new obj16 to remove snapmap only, check for repair message
Use --rmtype nosnapmap to remove obj5 while leaving snapmap behind
Signed-off-by: David Zafman <dzafman@redhat.com>
* refs/pull/24828/head:
qa/osd-bluefs-volume-ops: use ceph-bluestore-tool for fsck
qa/osd-bluefs-volume-ops: reduce space usage for the test case
Reviewed-by: David Zafman <dzafman@redhat.com>
