This reverts commit 6f495974a8.
This needs more discussion, since "make install" does not currently
create /usr/lib/ceph (and maybe /usr/share/ceph?)
This fixes the rpmbuild failure,
error: File not found:
/srv/autobuild-ceph/gitbuilder.git/build/rpmbuild/BUILDROOT/ceph-9.0.0-1225.ga16afdd.el6.x86_64/usr/lib/ceph
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Commit d8abde3338 introduced a stray
%endif. Remove it.
This fixes the build error:
"error: /srv/autobuild-ceph/gitbuilder.git/build/ceph.spec:140: Got a
%endif with no %if"
Reported-by: Greg Farnum <gfarnum@redhat.com>
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Extracted conditionals from SUSE rpm spec file to forward port.
Original work done by Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Owen Synge <osynge@suse.com>
Extracted conditionals from SUSE rpm spec file to forward port.
Original work done by Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Owen Synge <osynge@suse.com>
Extracted conditionals from SUSE rpm spec file to forward port.
Original work done by Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Owen Synge <osynge@suse.com>
Extracted conditionals from SUSE rpm spec file to forward port.
Original work done by Thorsten Behrens <tbehrens@suse.com>
Signed-off-by: Owen Synge <osynge@suse.com>
RPM spec files summary should not end with a dot.
This was inconsistent across the ceph rpm packages
and creates errors with rpm lint.
Signed-off-by: Owen Synge <osynge@suse.com>
The semantic and interface of get_pg are the same, that avoids
duplication and the ceph-helpers.sh version is tested and documented.
Make the ceph-test package dependent on xmlstarlet because it is
needed by ceph-helpers.sh.
Signed-off-by: Loic Dachary <ldachary@redhat.com>
rpm lint says the following directories
/usr/share/ceph
/usr/lib/ceph
are un owned by any package and this causes
OBS to emit errors.
Signed-off-by: Owen Synge <osynge@suse.com>
SUSE spec file got very out of sync with upstream master. This patch
helps resolve the build dependencies from suse ceph.
Signed-off-by: Owen Synge <osynge@suse.com>
The libexec path is different for different distributions.
systemd. This path is defined by a new variable on the
configure path.
This variable can be set with enviroment SYSTEMD_LIBEXEC_DIR.
The parameter --with-systemd-libexec-dir overrides the enviroment
variable.
Appropriate conditionals are set for SUSE and RHEL derivatives.
This is then used to template out systemd/ceph-osd@.service
Signed-off-by: Owen Synge <osynge@suse.com>
ceph-common needs python-argparse in SUSE/openSUSE and
needs redhat-lsb-core only in RHEL/CentOS/Fedora.
http://tracker.ceph.com/issues/11638Fixes: #11638
Signed-off-by: Nathan Cutler <ncutler@suse.cz>
0%{?rhel} || 0%{?centos} can be simplified to just 0%{?rhel}, since
CentOS defines that macro for compatibility with RHEL.
Signed-off-by: Nathan Cutler <ncutler@suse.cz>
The master specfile newly defines a _with_systemd variable that should be true
for the set of distros that are using systemd. Since this set of distros
includes SUSE/openSUSE (at least for the more recent versions where ceph is
supported), this commit sets _with_systemdto true on SUSE/openSUSE.
http://tracker.ceph.com/issues/11610Fixes: #11610
Signed-off-by: Nathan Cutler <ncutler@suse.cz>
Automatically create /var/lib/ceph/radosgw with the
ceph-radosgw package, and /var/lib/ceph/bootstrap-rgw
via the ceph package.
Signed-off-by: Travis Rhoden <trhoden@redhat.com>
This change ensures that the ceph-objectstore-tool utility is present on
all OSDs. This makes it easier for users to run this tool to do manual
debugging/recovery in some scenarios.
http://tracker.ceph.com/issues/11376 Refs: #11376
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Better to have static config like this that needs to be installed in
/etc in a separate subdirectory of the project.
Signed-off-by: Tim Serong <tserong@suse.com>
This adds SuSEfirewall2 service files for Ceph MON, OSD and MDS, for use
on SLES and openSUSE. The MON template opens port 6789 and the OSD/MDS
template opens the range 6800-7300 as per
http://ceph.com/docs/master/rados/configuration/network-config-ref/
Signed-off-by: Tim Serong <tserong@suse.com>
Commit 71a5090bca added a "_with_systemd"
conditional to the RPMs, but I erred with the version comparison
operator, so this only applied to RHEL 8+, not RHEL 7+.
Adjust the conditional so that it will really apply to RHEL 7+. While
we're here, add Fedora as well.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Reported-by: Boris Ranto <branto@redhat.com>
Instead of listing the operating system versions that do not require the
python-sphinx10 package, switch to listing the operating system versions that
require the python-sphinx10 package. It's easier to maintain because
there only are a few.
Signed-off-by: Loic Dachary <ldachary@rehdat.com>
* move rst files from doc/man/8 into man/8
* extract man_pages setting for sphinx from doc/conf.py to man/conf.py
* generate all man pages in `make install`
* add python-sphinx to Build-Depends
* check for sphinx-build in `configure`
* run changed rst files through sphinx-build in `make check`
Signed-off-by: Kefu Chai <kchai@redhat.com>
Prior to this commit, we didn't install /var/run/ceph as a normal
directory. We used the %ghost directive and created the directory with
a "mkdir" command in %post.
This was lacking in several ways:
1) Simplicy: there is no need to use %ghost; other packages (eg.
mariadb) simply use a normal %dir for their socket directory.
2) RPM does not have control over the permissions of the /var/run/ceph
directory. This does not interact well with "rpm -V". Moreover,
once Ceph itself gets unprivileged user support, RPM itself won't
be able to set the permissions of the directory for a (future)
unprivileged UID.
3) On distributions that use systemd as an init system, /var/run is a
symlink to /run, which is tmpfs. This means that /var/run/ceph does
not persist across reboots on those systems.
Remove the %ghost directive; it makes more sense for RPM to simply
install this directory like the rest of the %files.
Add a "_with_systemd" conditional so we know which distros use systemd
as their init system. Add the /etc/tmpfiles.d/ceph.conf file on those
distros. See
http://www.freedesktop.org/software/systemd/man/tmpfiles.d.html
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Fedora 12 has been EOL for a long time. Remove the reference in the
RPM .spec file.
Since RHEL 5 support for Ceph is a work in progress, we won't remove
this entire python_sitelib / python_sitearch conditional for now, since
those are still needed on RHEL 5.
Add the rhel_version macro to make the conditional compatible with
SUSE's OBS.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
The /usr/bin/ceph_perf_objectstore file is installed by default. Prior
to this commit it was missing from the packaging. This caused the RPM to
fail to build in mock.
Add ceph_perf_objectstore to the "ceph-test" RPM and Debian package.
If we end up developing further ceph_perf_* utilities, it would make
sense to glob them all with a wildcard, similar to what we are doing
with all the ceph_test_* utilities in ceph-test.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
