The old note made it sound like we weren't crash-consistent, and had a
confusing section about needing to clone before mounting.
You *do* need to clone the snapshot before mounting it, but that has
nothing to do fs freezing or consistency.
Signed-off-by: Greg Farnum <gfarnum@redhat.com>
Also added: "The output of `osd create` is not specified
any may vary between orchestrator backends."
Signed-off-by: Sebastian Wagner <sebastian.wagner@suse.com>
* refs/pull/25360/head:
qa/workunits/mon/pg_autoscaler: clean up pools afterwards
qa/suites/rados/singletone/all/pg-autoscaler: whitelist health warnings
qa/tasks/ceph: wait for splits/merges before final scrub
mon/OSDMonitor: be tidy with target_size_ratio and pre-nautilus code
mgr/pg_autoscaler: simplify conditions
qa/suites/rados: add simple pg-autoscaler test
qa/workunits/cephtool/test.sh: pg_autoscale_mode=off while testing pg_num etc
doc/rados/operations: document autoscaler and its health warnings
mgr/pg_autoscaler: add pg autoscaler module
pybind/mgr/mgr_util: move format_ helpers out of status module
mon/OSDMonitor: accept optional target_size_{bytes,ratio} to 'osd pool create'
mon/OSDMonitor: remove max_split_count configurable
osd/osd_types: pool_opts_t: int -> int64_t
osd/osd_types: pool_opts: fix whitespace
osd/osd_types: pool_opts_t: make encoding feature-dependent
mgr/devicehealth: pg_num_min 1 for device_health_metrics pool
mon/OSDMonitor: accept optional pg_num_min to 'osd pool create'
mon/OSDMonitor: apply osd_pool_default_pg_autoscale_mode to new pools
pybind/mgr/mgr_module: some accessors
mon/MgrMonitor: enable progress module by default
osd/osd_types: add pool pg_autoscale_mode, pg_num_min, target_size_{bytes,ratio} properties
osdc/Objecter: revise get_latest_version locking
os/memstore: ignore OP_COLL_SET_BITS
qa: generalise REQUIRE_MEMSTORE
mgr: drop GIL in get_config
mon: add 'size' arg to `osd pool create`
mon: use pg_num_target for checks during creation
mgr: revise locking in getter paths
common/options: add `mon_target_pg_per_osd`
mgr: expose OSDMap.pool_raw_used_rate
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Neha Ojha <nojha@redhat.com>
Add explanatory information on:
* "rgw swift account in url" (including the Swift account in the Swift
API url and Keystone endpoint)
* "rgw swift versioning enabled" (enabling Swift object versioning)
* "rgw s3 auth use keystone" (enabling S3 authentication against
Keystone)
* "rgw keystone implicit tenants" (multi-tenancy via Keystone, including
its implications for the Swift and S3 APIs)
Fixes: http://tracker.ceph.com/issues/36765
Signed-off-by: Florian Haas <florian@citynetwork.eu>
* refs/pull/25190/head:
mgr/prometheus: adjust to new 'df' fields
mon/Monitor: fix newline between df section
doc: update docs for new ceph df output
mon/PGMap: break down RAW usage by device class
mon/PGMap: tweak df headers
mon/PGMap: GLOBAL -> RAW STORAGE in 'df' output
mon/PGMap: dump_fs_stats -> dump_cluster_stats
Reviewed-by: Kefu Chai <kchai@redhat.com>
This command has not worked since hammer and makes no sense in an
environment where we do not allow empty caps
Fixes: http://tracker.ceph.com/issues/37663
Signed-off-by: Brad Hubbard <bhubbard@redhat.com>
Fixed incorrect note directives and added a section about how to speed
up development/scratch builds with ccache.
Signed-off-by: Lenz Grimmer <lgrimmer@suse.com>
ceph-volume zap devices associated with an OSD ID and/or OSD FSID
Reviewed-by: Andrew Schoen <aschoen@redhat.com>
Reviewed-by: Sebastien Han <shan@redhat.com>
mgr/deepsea: check for inflight completions when starting event reader, cleanup logging and comments
Reviewed-by: Sebastian Wagner <sebastian.wagner@suse.com>
Unlike `config set`, `config-key set` does not take the <who>
argument.
This change removes it from mgr ssl setup.
Signed-off-by: Mehdi Abaakouk <sileht@sileht.net>
Fixes: https://tracker.ceph.com/issues/37451
This fix involves adding :ref: labels to the add-or-rm-mons.rst
page. I also added :ref: labels for other headings within
add-or-rm-mons.rst (for future reference).
Signed-off-by: James McClune <jmcclune@mcclunetechnologies.net>
A Ceph Manager Orchestrator that uses a external REST API service to execute Ansible playbooks.
get_inventory implementation
Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
Document how to use CLI through Orchestrator CLI
Signed-off-by: Juan Miguel Olmo Martínez <jolmomar@redhat.com>
* refs/pull/24502/head:
crushtool: implement --rebuild-class-roots command
crushtool: make --reweight re-sum choose_args weight-sets too
crushtool: --reweight should only reweight nonshadow roots
crush/CrushWrapper: reclassify: use default parent for created buckets
crush/CrushWrapper: reclassify: handle to-be-created buckets that we need twice
test/cli/crushtool/reclassify: add second gabe test case
crushtool: add --set-subtree-class; do not set class via --reclassify-root
test/cli/crushtool/reclassify: add reclassify test cases
doc/rados/operations/crush*: document reclassify
doc/rados/operations/crush: remove instructions for separate crush trees for ssd
crushtool: add --compare command
crushtool: implement --reclassify
crush/CrushCompiler: fix id scan to include class ids
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Sometimes we don't want the --reclassify-root to set the class of every
device because a small number of them are (correctly) a different class.
Allow both behaviors by adding a new, separate command to set the class
of all devices beneath a point in the hierarchy and do not implicitly do
that relabeling as part of --reclassify-root.
Signed-off-by: Sage Weil <sage@redhat.com>
doc/orchestrator: Integrate CLI specification into the documentation
Reviewed-by: Alfredo Deza <adeza@redhat.com>
Reviewed-by: Jan Fajerski <jfajerski@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
This module provides integration between Ceph's orchestrator framework
and DeepSea, a Ceph deployment and management system built upon Salt.
Included so far are implementations of get_inventory() and
describe_service(). This allows `ceph orchestrator device ls`, `ceph
orchestrator service ls` and `ceph orchestrator service status` to
operate correctly.
To test, try:
# ceph mgr module enable orchestrator_cli
# ceph mgr module enable deepsea
# ceph orchestrator set backend deepsea
# ceph deepsea config-set salt_api_url <salt api url>
# ceph deepsea config-set salt_api_username <salt api username>
# ceph deepsea config-set salt_api_password <salt api shared secret>
# ceph orchestrator device ls
# ceph orchestrator service ls
Signed-off-by: Tim Serong <tserong@suse.com>
This section was removed accidentally by
331a826a9f. It offers a helpful configuration
variant to deal with mgr failovers.
Signed-off-by: Jan Fajerski <jfajerski@suse.com>
mgr/orchestrator: Add support for "ceph orchestrator service ls"
Reviewed-by: John Spray <john.spray@redhat.com>
Reviewed-by: Sebastian Wagner <sebastian.wagner@suse.com>
Reviewed-by: Tim Serong <tserong@suse.com>
Separate diskprediction local cloud from the diskprediction plugin.
Devicehealth invoke device prediction function related on the global
configuration "device_failure_prediction_mode".
Signed-off-by: Rick Chen <rick.chen@prophetstor.com>
The ServiceDescription object just holds a list of ServiceLocation
objects. Eliminate ServiceLocation and merge it into the
ServiceDescription class. Have describe_service return a list of
ServiceDescriptions.
Suggested-by: Tim Serong <tserong@suse.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
There's currently no way to enumerate the services that the
orchestrator backend knows about. Add a "service ls" command
that will list them with some basic info, subject to filters
given on the command line.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
- Neha is the new RADOS lead, but Josh is sticking around on the CLT
- John is leaving Red Hat and the Ceph project (we will miss him!)
- alphabetize
Signed-off-by: Sage Weil <sage@redhat.com>
* refs/pull/24925/head:
Avoid import _strptime failed
Avoid exception if remote plugin not enabled
Separate diskprediction local plugin from the diskprediction plugin
Reviewed-by: Sage Weil <sage@redhat.com>
``ceph-deploy osd create --data {device} {ceph-node}`` command
is not displayed properly because of missing double colons.
Signed-off-by: Alexey Stupnikov <aleksey.stupnikov@gmail.com>
The default was changed from on to off in 4.6 because the way rbytes behaves can be surprising and sometimes confuses tools like rsync.
Signed-off-by: Xiang Dai <764524258@qq.com>
we have switched from tmap to omap long ago.
but keep the server side implementation around, in case ancient
client is still using these tmap APIs.
also, tmap_update() is kept, because librbd is using it for v1 image
backward compatibility.
Signed-off-by: Kefu Chai <kchai@redhat.com>
Permits setting restrictive permissions on these secrets.
Fixes: http://tracker.ceph.com/issues/36621
Signed-off-by: Matt Benjamin <mbenjamin@redhat.com>
Fixes: https://tracker.ceph.com/issues/36193
Enable API auditing with 'ceph dashboard set-audit-api-enabled true' (default is false). If you do not want to log the request payload, then disable it via 'set-audit-api-log-payload false' (default is true).
Example output:
2018-10-08 10:25:21.850994 mgr.x [INF] [DASHBOARD] from='https://[::1]:44410' path='/api/auth' method='POST' user='None' params='{"username": "admin", "password": "***", "stay_signed_in": false}'
Signed-off-by: Volker Theile <vtheile@suse.com>
Separate diskprediction local plugin from the diskprediction plugin.
Devicehealth invoke device prediction function related on the global
configuration "device_failure_prediction_mode".
Signed-off-by: Rick Chen <rick.chen@prophetstor.com>
Rewrote the documentation in a step-by-step style, reformatted using RST's
titles instead of bolds, added installation of GIT if needed, added
installation of compilers needed for tcmu-runner
Signed-off-by: Massimiliano Cuttini <massimiliano.cuttini@phoenixweb.it>
Referenced purge subcommand info via ceph osd command label.
Fixes: https://tracker.ceph.com/issues/36605
Signed-off-by: James McClune <jmcclune@mcclunetechnologies.net>
* refs/pull/24585/head:
doc: add developer documentation on new cephfs reclaim interfaces
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Zheng Yan <zyan@redhat.com>
unless creating the default pool named to be "rbd",
it will fail without pointing the pool name when
using rbd command.
Signed-off-by: Changcheng Liu <changcheng.liu@intel.com>
