ceph/doc/cephfs/mds-config-ref.rst

======================
 MDS Config Reference
======================

``mon force standby active`` 

:Description: If ``true`` monitors force standby-replay to be active. Set
              under ``[mon]`` or ``[global]``.

:Type: Boolean
:Default: ``true`` 


``mds max file size``

:Description: The maximum allowed file size to set when creating a 
              new file system.

:Type:  64-bit Integer Unsigned
:Default:  ``1ULL << 40``


``mds cache size``

:Description: The number of inodes to cache.
:Type:  32-bit Integer
:Default: ``100000``


``mds cache mid``

:Description: The insertion point for new items in the cache LRU 
              (from the top).

:Type:  Float
:Default: ``0.7``


``mds dir commit ratio``

:Description: The fraction of directory that is dirty before Ceph commits using 
              a full update (instead of partial update).

:Type:  Float
:Default: ``0.5``


``mds dir max commit size``

:Description: The maximum size of a directory update before Ceph breaks it into 
              smaller transactions) (MB).
              
:Type:  32-bit Integer
:Default: ``90``


``mds decay halflife``

:Description: The half-life of MDS cache temperature.
:Type:  Float
:Default: ``5``

``mds beacon interval``

:Description: The frequency (in seconds) of beacon messages sent 
              to the monitor.

:Type:  Float
:Default: ``4``


``mds beacon grace``

:Description: The interval without beacons before Ceph declares an MDS laggy 
              (and possibly replace it).
              
:Type:  Float
:Default: ``15``


``mds blacklist interval``

:Description: The blacklist duration for failed MDSs in the OSD map.
:Type:  Float
:Default: ``24.0*60.0``


``mds session timeout``

:Description: The interval (in seconds) of client inactivity before Ceph 
              times out capabilities and leases.
              
:Type:  Float
:Default: ``60``


``mds session autoclose``

:Description: The interval (in seconds) before Ceph closes 
              a laggy client's session.
              
:Type:  Float
:Default: ``300``


``mds reconnect timeout``

:Description: The interval (in seconds) to wait for clients to reconnect 
              during MDS restart.

:Type:  Float
:Default: ``45``


``mds tick interval``

:Description: How frequently the MDS performs internal periodic tasks.
:Type:  Float
:Default: ``5``


``mds dirstat min interval``

:Description: The minimum interval (in seconds) to try to avoid propagating 
              recursive stats up the tree.
              
:Type:  Float
:Default: ``1``

``mds scatter nudge interval``

:Description: How quickly dirstat changes propagate up.
:Type:  Float
:Default: ``5``


``mds client prealloc inos``

:Description: The number of inode numbers to preallocate per client session.
:Type:  32-bit Integer
:Default: ``1000``


``mds early reply``

:Description: Determines whether the MDS should allow clients to see request 
              results before they commit to the journal.

:Type:  Boolean
:Default: ``true``


``mds use tmap``

:Description: Use trivialmap for directory updates.
:Type:  Boolean
:Default: ``true``


``mds default dir hash``

:Description: The function to use for hashing files across directory fragments.
:Type:  32-bit Integer
:Default: ``2`` (i.e., rjenkins)


``mds log skip corrupt events``

:Description: Determines whether the MDS should try to skip corrupt journal 
              events during journal replay.
              
:Type:  Boolean
:Default:  ``false``


``mds log max events``

:Description: The maximum events in the journal before we initiate trimming.
              Set to ``-1`` to disable limits.
              
:Type:  32-bit Integer
:Default: ``-1``


``mds log max segments``

:Description: The maximum number of segments (objects) in the journal before 
              we initiate trimming. Set to ``-1`` to disable limits.

:Type:  32-bit Integer
:Default: ``30``


``mds log max expiring``

:Description: The maximum number of segments to expire in parallels
:Type:  32-bit Integer
:Default: ``20``


``mds log eopen size``

:Description: The maximum number of inodes in an EOpen event.
:Type:  32-bit Integer
:Default: ``100``


``mds bal sample interval``

:Description: Determines how frequently to sample directory temperature 
              (for fragmentation decisions).
              
:Type:  Float
:Default: ``3``


``mds bal replicate threshold``

:Description: The maximum temperature before Ceph attempts to replicate 
              metadata to other nodes.
              
:Type:  Float
:Default: ``8000``


``mds bal unreplicate threshold``

:Description: The minimum temperature before Ceph stops replicating 
              metadata to other nodes.
              
:Type:  Float
:Default: ``0``


``mds bal frag``

:Description: Determines whether the MDS will fragment directories.
:Type:  Boolean
:Default:  ``false``


``mds bal split size``

:Description: The maximum directory size before the MDS will split a directory 
              fragment into smaller bits.
              
:Type:  32-bit Integer
:Default: ``10000``


``mds bal split rd``

:Description: The maximum directory read temperature before Ceph splits 
              a directory fragment.
              
:Type:  Float
:Default: ``25000``


``mds bal split wr``

:Description: The maximum directory write temperature before Ceph splits 
              a directory fragment.
              
:Type:  Float
:Default: ``10000``


``mds bal split bits``

:Description: The number of bits by which to split a directory fragment.
:Type:  32-bit Integer
:Default: ``3``


``mds bal merge size``

:Description: The minimum directory size before Ceph tries to merge 
              adjacent directory fragments.
              
:Type:  32-bit Integer
:Default: ``50``


``mds bal interval``

:Description: The frequency (in seconds) of workload exchanges between MDSs.
:Type:  32-bit Integer
:Default: ``10``


``mds bal fragment interval``

:Description: The delay (in seconds) between a fragment being elegible for split
              or merge and executing the fragmentation change.
:Type:  32-bit Integer
:Default: ``5``


``mds bal fragment fast factor``

:Description: The ratio by which frags may exceed the split size before
              a split is executed immediately (skipping the fragment interval)
:Type:  Float
:Default: ``1.5``

``mds bal fragment size max``

:Description: The maximum size of a fragment before any new entries
              are rejected with ENOSPC.
:Type:  32-bit Integer
:Default: ``100000``

``mds bal idle threshold``

:Description: The minimum temperature before Ceph migrates a subtree 
              back to its parent.
              
:Type:  Float
:Default: ``0``


``mds bal max``

:Description: The number of iterations to run balancer before Ceph stops. 
              (used for testing purposes only)

:Type:  32-bit Integer
:Default: ``-1``


``mds bal max until``

:Description: The number of seconds to run balancer before Ceph stops. 
              (used for testing purposes only)

:Type:  32-bit Integer
:Default: ``-1``


``mds bal mode``

:Description: The method for calculating MDS load. 

              - ``0`` = Hybrid.
              - ``1`` = Request rate and latency. 
              - ``2`` = CPU load.
              
:Type:  32-bit Integer
:Default: ``0``


``mds bal min rebalance``

:Description: The minimum subtree temperature before Ceph migrates.
:Type:  Float
:Default: ``0.1``


``mds bal min start``

:Description: The minimum subtree temperature before Ceph searches a subtree.
:Type:  Float
:Default: ``0.2``


``mds bal need min``

:Description: The minimum fraction of target subtree size to accept.
:Type:  Float
:Default: ``0.8``


``mds bal need max``

:Description: The maximum fraction of target subtree size to accept.
:Type:  Float
:Default: ``1.2``


``mds bal midchunk``

:Description: Ceph will migrate any subtree that is larger than this fraction 
              of the target subtree size.
              
:Type:  Float
:Default: ``0.3``


``mds bal minchunk``

:Description: Ceph will ignore any subtree that is smaller than this fraction 
              of the target subtree size.
              
:Type:  Float
:Default: ``0.001``


``mds bal target removal min``

:Description: The minimum number of balancer iterations before Ceph removes
              an old MDS target from the MDS map.
              
:Type:  32-bit Integer
:Default: ``5``


``mds bal target removal max``

:Description: The maximum number of balancer iteration before Ceph removes 
              an old MDS target from the MDS map.
              
:Type:  32-bit Integer
:Default: ``10``


``mds replay interval``

:Description: The journal poll interval when in standby-replay mode.
              ("hot standby")
              
:Type:  Float
:Default: ``1``


``mds shutdown check``

:Description: The interval for polling the cache during MDS shutdown.
:Type:  32-bit Integer
:Default: ``0``


``mds thrash exports``

:Description: Ceph will randomly export subtrees between nodes (testing only).
:Type:  32-bit Integer
:Default: ``0``


``mds thrash fragments``

:Description: Ceph will randomly fragment or merge directories.
:Type:  32-bit Integer
:Default: ``0``


``mds dump cache on map``

:Description: Ceph will dump the MDS cache contents to a file on each MDSMap.
:Type:  Boolean
:Default:  ``false``


``mds dump cache after rejoin``

:Description: Ceph will dump MDS cache contents to a file after 
              rejoining the cache (during recovery).
              
:Type:  Boolean
:Default:  ``false``


``mds verify scatter``

:Description: Ceph will assert that various scatter/gather invariants 
              are ``true`` (developers only).
              
:Type:  Boolean
:Default:  ``false``


``mds debug scatterstat``

:Description: Ceph will assert that various recursive stat invariants 
              are ``true`` (for developers only).
              
:Type:  Boolean
:Default:  ``false``


``mds debug frag``

:Description: Ceph will verify directory fragmentation invariants 
              when convenient (developers only).
              
:Type:  Boolean
:Default:  ``false``


``mds debug auth pins``

:Description: The debug auth pin invariants (for developers only).
:Type:  Boolean
:Default:  ``false``


``mds debug subtrees``

:Description: The debug subtree invariants (for developers only).
:Type:  Boolean
:Default:  ``false``


``mds kill mdstable at``

:Description: Ceph will inject MDS failure in MDSTable code 
              (for developers only).
              
:Type:  32-bit Integer
:Default: ``0``


``mds kill export at``

:Description: Ceph will inject MDS failure in the subtree export code 
              (for developers only).
              
:Type:  32-bit Integer
:Default: ``0``


``mds kill import at``

:Description: Ceph will inject MDS failure in the subtree import code 
              (for developers only).
              
:Type:  32-bit Integer
:Default: ``0``


``mds kill link at``

:Description: Ceph will inject MDS failure in hard link code 
              (for developers only).
              
:Type:  32-bit Integer
:Default: ``0``


``mds kill rename at``

:Description: Ceph will inject MDS failure in the rename code 
              (for developers only).
              
:Type:  32-bit Integer
:Default: ``0``


``mds wipe sessions``

:Description: Ceph will delete all client sessions on startup 
              (for testing only).
              
:Type:  Boolean
:Default: ``0``


``mds wipe ino prealloc``

:Description: Ceph will delete ino preallocation metadata on startup 
              (for testing only).
              
:Type:  Boolean
:Default: ``0``


``mds skip ino``

:Description: The number of inode numbers to skip on startup 
              (for testing only).
              
:Type:  32-bit Integer
:Default: ``0``


``mds standby for name``

:Description: An MDS daemon will standby for another MDS daemon of the name 
              specified in this setting.

:Type:  String
:Default: N/A


``mds standby for rank``

:Description: An MDS daemon will standby for an MDS daemon of this rank. 
:Type:  32-bit Integer
:Default: ``-1``


``mds standby replay``

:Description: Determines whether a ``ceph-mds`` daemon should poll and replay 
              the log of an active MDS (hot standby).
              
:Type:  Boolean
:Default:  ``false``