ceph/doc/rbd/nvmeof-target-configure.rst

123 lines
4.0 KiB
ReStructuredText
Raw Normal View History

==========================================
Installing and Configuring NVMe-oF Targets
==========================================
Traditionally, block-level access to a Ceph storage cluster has been limited to
(1) QEMU and ``librbd`` (which is a key enabler for adoption within OpenStack
environments), and (2) the Linux kernel client. Starting with the Ceph Reef
release, block-level access has been expanded to offer standard NVMe/TCP
support, allowing wider platform usage and potentially opening new use cases.
Prerequisites
=============
- Red Hat Enterprise Linux/CentOS 8.0 (or newer); Linux kernel v4.16 (or newer)
- A working Ceph Reef or later storage cluster, deployed with ``cephadm``
- NVMe-oF gateways, which can either be colocated with OSD nodes or on dedicated nodes
- Separate network subnets for NVME-oF front-end traffic and Ceph back-end traffic
Explanation
===========
The Ceph NVMe-oF gateway is both an NVMe-oF target and a Ceph client. Think of
it as a "translator" between Ceph's RBD interface and the NVME-oF protocol. The
Ceph NVMe-oF gateway can run on a standalone node or be colocated with other
daemons, for example on a Ceph Object Store Disk (OSD) node. When colocating
the Ceph NVMe-oF gateway with other daemons, ensure that sufficient CPU and
memory are available. The steps below explain how to install and configure the
Ceph NVMe/TCP gateway for basic operation.
Installation
============
Complete the following steps to install the Ceph NVME-oF gateway:
#. Create a pool in which the gateways configuration can be managed:
.. prompt:: bash #
ceph osd pool create NVME-OF_POOL_NAME
#. Enable RBD on the NVMe-oF pool:
.. prompt:: bash #
rbd pool init NVME-OF_POOL_NAME
#. Deploy the NVMe-oF gateway daemons on a specific set of nodes:
.. prompt:: bash #
ceph orch apply nvmeof NVME-OF_POOL_NAME --placment="host01, host02"
Configuration
=============
Download the ``nvmeof-cli`` container before first use.
To download it use the following command:
.. prompt:: bash #
podman pull quay.io/ceph/nvmeof-cli:latest
#. Create an NVMe subsystem:
.. prompt:: bash #
podman run -it quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 subsystem add --subsystem SUSYSTEM_NQN
The subsystem NQN is a user defined string, for example ``nqn.2016-06.io.spdk:cnode1``.
#. Define the IP port on the gateway that will process the NVME/TCP commands and I/O:
a. On the install node, get the NVME-oF Gateway name:
.. prompt:: bash #
ceph orch ps | grep nvme
b. Define the IP port for the gateway:
.. prompt:: bash #
podman run -it quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 listener add --subsystem SUBSYSTEM_NQN --gateway-name GATEWAY_NAME --traddr GATEWAY_IP --trsvcid 4420
#. Get the host NQN (NVME Qualified Name) for each host:
.. prompt:: bash #
cat /etc/nvme/hostnqn
.. prompt:: bash #
esxcli nvme info get
#. Allow the initiator host to connect to the newly-created NVMe subsystem:
.. prompt:: bash #
podman run -it quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 host add --subsystem SUBSYSTEM_NQN --host "HOST_NQN1, HOST_NQN2"
#. List all subsystems configured in the gateway:
.. prompt:: bash #
podman run -it quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 subsystem list
#. Create a new NVMe namespace:
.. prompt:: bash #
podman run -it quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 namespace add --subsystem SUBSYSTEM_NQN --rbd-pool POOL_NAME --rbd-image IMAGE_NAME
#. List all namespaces in the subsystem:
.. prompt:: bash #
podman run -it quay.io/ceph/nvmeof-cli:latest --server-address GATEWAY_IP --server-port GATEWAY_PORT 5500 namespace list --subsystem SUBSYSTEM_NQN