ceph/doc/rados/configuration/mon-osd-interaction.rst

=====================================
 Configuring Monitor/OSD Interaction
=====================================

.. index:: heartbeat

After you have completed your initial Ceph configuration, you may deploy and run
Ceph.  When you execute a command such as ``ceph health`` or ``ceph -s``,  the
:term:`Ceph Monitor` reports on the current state of the :term:`Ceph Storage
Cluster`. The Ceph Monitor knows about the Ceph Storage Cluster by requiring
reports from each :term:`Ceph OSD Daemon`, and by receiving reports from Ceph
OSD Daemons about the status of their neighboring Ceph OSD Daemons. If the Ceph
Monitor doesn't receive reports, or if it receives reports of changes in the
Ceph Storage Cluster, the Ceph Monitor updates the status of the :term:`Ceph
Cluster Map`.

Ceph provides reasonable default settings for Ceph Monitor/Ceph OSD Daemon
interaction. However, you may override the defaults. The following sections
describe how Ceph Monitors and Ceph OSD Daemons interact for the purposes of
monitoring the Ceph Storage Cluster.

.. index:: heartbeat interval

OSDs Check Heartbeats
=====================

Each Ceph OSD Daemon checks the heartbeat of other Ceph OSD Daemons every 6
seconds. You can change the heartbeat interval by adding an ``osd heartbeat
interval`` setting under the ``[osd]`` section of your Ceph configuration file,
or by setting the value at runtime. If a neighboring Ceph OSD Daemon doesn't
show a heartbeat within a 20 second grace period, the Ceph OSD Daemon may
consider the neighboring Ceph OSD Daemon ``down`` and report it back to a Ceph
Monitor, which will update the Ceph Cluster Map. You may change this grace
period by adding an ``osd heartbeat grace`` setting under the ``[mon]``
and ``[osd]`` or ``[global]`` section of your Ceph configuration file,
or by setting the value at runtime.


.. ditaa:: +---------+          +---------+
           |  OSD 1  |          |  OSD 2  |
           +---------+          +---------+
                |                    |
                |----+ Heartbeat     |
                |    | Interval      |
                |<---+ Exceeded      |
                |                    |
                |       Check        |
                |     Heartbeat      |
                |------------------->|
                |                    |
                |<-------------------|
                |   Heart Beating    |
                |                    |
                |----+ Heartbeat     |
                |    | Interval      |
                |<---+ Exceeded      |
                |                    |
                |       Check        |
                |     Heartbeat      |
                |------------------->|
                |                    |
                |----+ Grace         |
                |    | Period        |
                |<---+ Exceeded      |
                |                    |
                |----+ Mark          |
                |    | OSD 2         |
                |<---+ Down          |
                

.. index:: OSD down report

OSDs Report Down OSDs
=====================

By default, a Ceph OSD Daemon must report to the Ceph Monitors that another Ceph
OSD Daemon is ``down`` three times before the Ceph Monitors acknowledge that the
reported Ceph OSD Daemon is ``down``. By default, only one
Ceph OSD Daemon is required to report another Ceph OSD Daemon ``down``. You can
change the number of Ceph OSD Daemones required to report a Ceph OSD Daemon
``down`` to a Ceph Monitor by adding an ``mon osd min down reporters`` setting
(``osd min down reporters`` prior to v0.62) under the ``[mon]`` section of your
Ceph configuration file, or by setting the value at runtime.


.. ditaa:: +---------+     +---------+
           |  OSD 1  |     | Monitor |
           +---------+     +---------+
                |               |             
                | OSD 2 Is Down |
                |-------------->|
                |               |             
                | OSD 2 Is Down |
                |-------------->|
                |               |             
                | OSD 2 Is Down |
                |-------------->|
                |               |             
                |               |----------+ Mark
                |               |          | OSD 2                
                |               |<---------+ Down


.. index:: peering failure

OSDs Report Peering Failure
===========================

If a Ceph OSD Daemon cannot peer with any of the Ceph OSD Daemons defined in its
Ceph configuration file (or the cluster map), it will ping a Ceph Monitor for
the most recent copy of the cluster map every 30 seconds. You can change the
Ceph Monitor heartbeat interval by adding an ``osd mon heartbeat interval``
setting under the ``[osd]`` section of your Ceph configuration file, or by
setting the value at runtime.

.. ditaa:: +---------+     +---------+     +-------+     +---------+
           |  OSD 1  |     |  OSD 2  |     | OSD 3 |     | Monitor |
           +---------+     +---------+     +-------+     +---------+
                |               |              |              |
                |  Request To   |              |              |
                |     Peer      |              |              |               
                |-------------->|              |              |
                |<--------------|              |              |
                |    Peering                   |              |
                |                              |              |
                |  Request To                  |              |
                |     Peer                     |              |               
                |----------------------------->|              |
                |                                             |
                |----+ OSD Monitor                            |
                |    | Heartbeat                              |
                |<---+ Interval Exceeded                      |
                |                                             |
                |         Failed to Peer with OSD 3           |
                |-------------------------------------------->|
                |<--------------------------------------------|
                |          Receive New Cluster Map            |
 

.. index:: OSD status

OSDs Report Their Status
========================

If an Ceph OSD Daemon doesn't report to a Ceph Monitor, the Ceph Monitor will
consider the Ceph OSD Daemon ``down`` after the  ``mon osd report timeout``
elapses. A Ceph OSD Daemon sends a report to a Ceph Monitor when a reportable
event such as a failure, a change in placement group stats, a change in
``up_thru`` or when it boots within 5 seconds. You can change the Ceph OSD
Daemon minimum report interval by adding an ``osd mon report interval min``
setting under the ``[osd]`` section of your Ceph configuration file, or by
setting the value at runtime. A Ceph OSD Daemon sends a report to a Ceph 
Monitor every 120 seconds irrespective of whether any notable changes occur. 
You can change the Ceph Monitor report interval by adding an ``osd mon report 
interval max`` setting under the ``[osd]`` section of your Ceph configuration 
file, or by setting the value at runtime.


.. ditaa:: +---------+          +---------+
           |  OSD 1  |          | Monitor |
           +---------+          +---------+
                |                    |
                |----+ Report Min    |
                |    | Interval      |
                |<---+ Exceeded      |
                |                    |
                |----+ Reportable    |
                |    | Event         |
                |<---+ Occurs        |
                |                    |
                |     Report To      |
                |      Monitor       |
                |------------------->|
                |                    |
                |----+ Report Max    |
                |    | Interval      |
                |<---+ Exceeded      |
                |                    |
                |     Report To      |
                |      Monitor       |
                |------------------->|
                |                    |
                |----+ Monitor       |
                |    | Fails         |
                |<---+               |
                                     +----+ Monitor OSD
                                     |    | Report Timeout
                                     |<---+ Exceeded
                                     |
                                     +----+ Mark
                                     |    | OSD 1
                                     |<---+ Down




Configuration Settings
======================

When modifying heartbeat settings, you should include them in the ``[global]``
section of your configuration file.

.. index:: monitor heartbeat

Monitor Settings
----------------

``mon osd min up ratio``

:Description: The minimum ratio of ``up`` Ceph OSD Daemons before Ceph will 
              mark Ceph OSD Daemons ``down``.
              
:Type: Double
:Default: ``.3``


``mon osd min in ratio``

:Description: The minimum ratio of ``in`` Ceph OSD Daemons before Ceph will 
              mark Ceph OSD Daemons ``out``.
              
:Type: Double
:Default: ``.3``


``mon osd laggy halflife``

:Description: The number of seconds laggy estimates will decay.
:Type: Integer
:Default: ``60*60``


``mon osd laggy weight``

:Description: The weight for new samples in laggy estimation decay.
:Type: Double
:Default: ``0.3``


``mon osd adjust heartbeat grace``

:Description: If set to ``true``, Ceph will scale based on laggy estimations.
:Type: Boolean
:Default: ``true``


``mon osd adjust down out interval``

:Description: If set to ``true``, Ceph will scaled based on laggy estimations.
:Type: Boolean
:Default: ``true``


``mon osd auto mark in`` 

:Description: Ceph will mark any booting Ceph OSD Daemons as ``in`` 
              the Ceph Storage Cluster.

:Type: Boolean
:Default: ``false``


``mon osd auto mark auto out in`` 

:Description: Ceph will mark booting Ceph OSD Daemons auto marked ``out`` 
              of the Ceph Storage Cluster as ``in`` the cluster.
              
:Type: Boolean
:Default: ``true`` 


``mon osd auto mark new in`` 

:Description: Ceph will mark booting new Ceph OSD Daemons as ``in`` the 
              Ceph Storage Cluster.
              
:Type: Boolean
:Default: ``true`` 


``mon osd down out interval`` 

:Description: The number of seconds Ceph waits before marking a Ceph OSD Daemon
              ``down`` and ``out`` if it doesn't respond.
              
:Type: 32-bit Integer
:Default: ``600``


``mon osd down out subtree limit``

:Description: The smallest :term:`CRUSH` unit type that Ceph will **not**
              automatically mark out. For instance, if set to ``host`` and if
              all OSDs of a host are down, Ceph will not automatically mark out
              these OSDs.

:Type: String
:Default: ``rack``


``mon osd report timeout`` 

:Description: The grace period in seconds before declaring 
              unresponsive Ceph OSD Daemons ``down``.

:Type: 32-bit Integer
:Default: ``900``

``mon osd min down reporters`` 

:Description: The minimum number of Ceph OSD Daemons required to report a 
              ``down`` Ceph OSD Daemon.

:Type: 32-bit Integer
:Default: ``1``


.. index:: OSD hearbeat

OSD Settings
------------

``osd heartbeat address``

:Description: An Ceph OSD Daemon's network address for heartbeats. 
:Type: Address
:Default: The host address.


``osd heartbeat interval`` 

:Description: How often an Ceph OSD Daemon pings its peers (in seconds).
:Type: 32-bit Integer
:Default: ``6``


``osd heartbeat grace`` 

:Description: The elapsed time when a Ceph OSD Daemon hasn't shown a heartbeat
              that the Ceph Storage Cluster considers it ``down``.
              This setting has to be set in both the [mon] and [osd] or [global]
              section so that it is read by both the MON and OSD daemons.
 
:Type: 32-bit Integer
:Default: ``20``


``osd mon heartbeat interval`` 

:Description: How often the Ceph OSD Daemon pings a Ceph Monitor if it has no 
              Ceph OSD Daemon peers.

:Type: 32-bit Integer
:Default: ``30`` 


``osd mon report interval max`` 

:Description: The maximum time in seconds that a Ceph OSD Daemon can wait before
              it must report to a Ceph Monitor.

:Type: 32-bit Integer
:Default: ``120`` 


``osd mon report interval min`` 

:Description: The minimum number of seconds a Ceph OSD Daemon may wait
              from startup or another reportable event before reporting 
              to a Ceph Monitor.

:Type: 32-bit Integer
:Default: ``5``
:Valid Range: Should be less than ``osd mon report interval max`` 


``osd mon ack timeout`` 

:Description: The number of seconds to wait for a Ceph Monitor to acknowledge a 
              request for statistics.

:Type: 32-bit Integer
:Default: ``30``