ceph/doc/dev/developer_guide/essentials.rst

Essentials (tl;dr)
==================

This chapter presents essential information that every Ceph developer needs
to know.

Leads
-----

The Ceph project is led by Sage Weil. In addition, each major project
component has its own lead. The following table shows all the leads and
their nicks on `GitHub`_:

.. _github: https://github.com/

========= ================ =============
Scope     Lead             GitHub nick
========= ================ =============
Ceph      Sage Weil        liewegas
RADOS     Neha Ojha        neha-ojha
RGW       Yehuda Sadeh     yehudasa
RGW       Matt Benjamin    mattbenjamin
RBD       Jason Dillaman   dillaman
CephFS    Patrick Donnelly batrick
Dashboard Ernesto Puerta   epuertat
MON       Joao Luis        jecluis
Build/Ops Ken Dreyer       ktdreyer
Docs      Zac Dover        zdover23
========= ================ =============

The Ceph-specific acronyms in the table are explained in
:doc:`/architecture`.

History
-------

See the `History chapter of the Wikipedia article`_.

.. _`History chapter of the Wikipedia article`: https://en.wikipedia.org/wiki/Ceph_%28software%29#History

Licensing
---------

Ceph is free software.

Unless stated otherwise, the Ceph source code is distributed under the
terms of the LGPL2.1 or LGPL3.0. For full details, see the file
`COPYING`_ in the top-level directory of the source-code tree.

.. _`COPYING`:
  https://github.com/ceph/ceph/blob/master/COPYING

Source code repositories
------------------------

The source code of Ceph lives on `GitHub`_ in a number of repositories below
the `Ceph "organization"`_.

.. _`Ceph "organization"`: https://github.com/ceph

A working knowledge of git_ is essential to make a meaningful contribution to the project as a developer.

.. _git: https://git-scm.com/doc

Although the `Ceph "organization"`_ includes several software repositories,
this document covers only one: https://github.com/ceph/ceph.

Redmine issue tracker
---------------------

Although `GitHub`_ is used for code, Ceph-related issues (Bugs, Features,
Backports, Documentation, etc.) are tracked at http://tracker.ceph.com,
which is powered by `Redmine`_.

.. _Redmine: http://www.redmine.org

The tracker has a Ceph project with a number of subprojects loosely
corresponding to the various architectural components (see
:doc:`/architecture`).

Mere `registration`_ in the tracker automatically grants permissions
sufficient to open new issues and comment on existing ones.

.. _registration: http://tracker.ceph.com/account/register

To report a bug or propose a new feature, `jump to the Ceph project`_ and
click on `New issue`_.

.. _`jump to the Ceph project`: http://tracker.ceph.com/projects/ceph
.. _`New issue`: http://tracker.ceph.com/projects/ceph/issues/new

.. _mailing-list:

Mailing lists
-------------

Ceph Development Mailing List
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The ``dev@ceph.io`` list is for discussion about the development of Ceph,
its interoperability with other technology, and the operations of the
project itself.

The email discussion list for Ceph development is open to all. Subscribe by
sending a message to ``dev-request@ceph.io`` with the following line in the
body of the message::

    subscribe ceph-devel


Ceph Client Patch Review Mailing List
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The ``ceph-devel@vger.kernel.org`` list is for discussion and patch review
for the Linux kernel Ceph client component. Note that this list used to
be an all-encompassing list for developers. When searching the archives, 
remember that this list contains the generic devel-ceph archives before mid-2018.

Subscribe to the list covering the Linux kernel Ceph client component by sending
a message to ``majordomo@vger.kernel.org`` with the following line in the body
of the message::

    subscribe ceph-devel


Other Ceph Mailing Lists
^^^^^^^^^^^^^^^^^^^^^^^^

There are also `other Ceph-related mailing lists`_.

.. _`other Ceph-related mailing lists`: https://ceph.com/irc/

.. _irc:


IRC
---

In addition to mailing lists, the Ceph community also communicates in real time
using `Internet Relay Chat`_.

.. _`Internet Relay Chat`: http://www.irchelp.org/

See ``https://ceph.com/irc/`` for how to set up your IRC
client and a list of channels.

.. _submitting-patches:

Submitting patches
------------------

The canonical instructions for submitting patches are contained in the
file `CONTRIBUTING.rst`_ in the top-level directory of the source-code
tree. There may be some overlap between this guide and that file.

.. _`CONTRIBUTING.rst`:
  https://github.com/ceph/ceph/blob/master/CONTRIBUTING.rst

All newcomers are encouraged to read that file carefully.

Building from source
--------------------

See instructions at :doc:`/install/build-ceph`.

Using ccache to speed up local builds
-------------------------------------
`ccache`_ can make the process of rebuilding the ceph source tree faster. 

Before you use `ccache`_ to speed up your rebuilds of the ceph source tree,
make sure that your source tree is clean and will produce no build failures.
When you have a clean source tree, you can confidently use `ccache`_, secure in
the knowledge that you're not using a dirty tree.

Old build artifacts can cause build failures. You might introduce these
artifacts unknowingly when switching from one branch to another. If you see
build errors when you attempt a local build, follow the procedure below to
clean your source tree.

Cleaning the Source Tree
^^^^^^^^^^^^^^^^^^^^^^^^

.. prompt:: bash $

  make clean
  
.. note:: The following commands will remove everything in the source tree 
          that isn't tracked by git. Make sure to back up your log files 
          and configuration options before running these commands.

.. prompt:: bash $

   git clean -fdx; git submodule foreach git clean -fdx

Building Ceph with ccache
^^^^^^^^^^^^^^^^^^^^^^^^^
``ccache`` is available as a package in most distros. To build ceph with
ccache, run the following command.

.. prompt:: bash $

  cmake -DWITH_CCACHE=ON ..

Using ccache to Speed Up Build Times
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
``ccache`` can be used for speeding up all builds of the system. For more
details, refer to the `run modes`_ section of the ccache manual. The default
settings of ``ccache`` can be displayed with the ``ccache -s`` command.

.. note:: We recommend overriding the ``max_size``. The default is 10G.
          Use a larger value, like 25G. Refer to the `configuration`_ section
          of the ccache manual for more information.

To further increase the cache hit rate and reduce compile times in a
development environment, set the version information and build timestamps to
fixed values. This makes it unnecessary to rebuild the binaries that contain
this information.

This can be achieved by adding the following settings to the ``ccache``
configuration file ``ccache.conf``::

  sloppiness = time_macros
  run_second_cpp = true

Now, set the environment variable ``SOURCE_DATE_EPOCH`` to a fixed value (a
UNIX timestamp) and set ``ENABLE_GIT_VERSION`` to ``OFF`` when running
``cmake``:

.. prompt:: bash $

  export SOURCE_DATE_EPOCH=946684800
  cmake -DWITH_CCACHE=ON -DENABLE_GIT_VERSION=OFF ..

.. note:: Binaries produced with these build options are not suitable for
  production or debugging purposes, as they do not contain the correct build
  time and git version information.

.. _`ccache`: https://ccache.samba.org/
.. _`run modes`: https://ccache.samba.org/manual.html#_run_modes
.. _`configuration`: https://ccache.samba.org/manual.html#_configuration

Development-mode cluster
------------------------

See :doc:`/dev/quick_guide`.

Kubernetes/Rook development cluster
-----------------------------------

See :ref:`kubernetes-dev`

.. _backporting:

Backporting
-----------

All bugfixes should be merged to the ``master`` branch before being
backported. To flag a bugfix for backporting, make sure it has a
`tracker issue`_ associated with it and set the ``Backport`` field to a
comma-separated list of previous releases (e.g. "hammer,jewel") that you think
need the backport.
The rest (including the actual backporting) will be taken care of by the
`Stable Releases and Backports`_ team.

.. _`tracker issue`: http://tracker.ceph.com/
.. _`Stable Releases and Backports`: http://tracker.ceph.com/projects/ceph-releases/wiki

Guidance for use of cluster log
-------------------------------

If your patches emit messages to the Ceph cluster log, please consult
this: :doc:`/dev/logging`.