ceph/doc/man/8/ceph.rst

:orphan:

==================================
 ceph -- ceph administration tool
==================================

.. program:: ceph

Synopsis
========

| **ceph** **auth** [ *add* \| *caps* \| *del* \| *export* \| *get* \| *get-key* \| *get-or-create* \| *get-or-create-key* \| *import* \| *list* \| *print-key* \| *print_key* ] ...

| **ceph** **compact**

| **ceph** **config-key** [ *del* | *exists* | *get* | *list* | *put* ] ...

| **ceph** **daemon** *<name>* \| *<path>* *<command>* ...

| **ceph** **daemonperf** *<name>* \| *<path>* [ *interval* [ *count* ] ]

| **ceph** **df** *{detail}*

| **ceph** **fs** [ *ls* \| *new* \| *reset* \| *rm* ] ...

| **ceph** **fsid**

| **ceph** **health** *{detail}*

| **ceph** **heap** [ *dump* \| *start_profiler* \| *stop_profiler* \| *release* \| *stats* ] ...

| **ceph** **injectargs** *<injectedargs>* [ *<injectedargs>*... ]

| **ceph** **log** *<logtext>* [ *<logtext>*... ]

| **ceph** **mds** [ *compat* \| *deactivate* \| *fail* \| *rm* \| *rmfailed* \| *set_state* \| *stat* \| *tell* ] ...

| **ceph** **mon** [ *add* \| *dump* \| *getmap* \| *remove* \| *stat* ] ...

| **ceph** **mon_status**

| **ceph** **osd** [ *blacklist* \| *blocked-by* \| *create* \| *deep-scrub* \| *df* \| *down* \| *dump* \| *erasure-code-profile* \| *find* \| *getcrushmap* \| *getmap* \| *getmaxosd* \| *in* \| *lspools* \| *map* \| *metadata* \| *out* \| *pause* \| *perf* \| *pg-temp* \| *primary-affinity* \| *primary-temp* \| *repair* \| *reweight* \| *reweight-by-pg* \| *rm* \| *scrub* \| *set* \| *setcrushmap* \| *setmaxosd*  \| *stat* \| *thrash* \| *tree* \| *unpause* \| *unset* ] ...

| **ceph** **osd** **crush** [ *add* \| *add-bucket* \| *create-or-move* \| *dump* \| *get-tunable* \| *link* \| *move* \| *remove* \| *rename-bucket* \| *reweight* \| *reweight-all* \| *reweight-subtree* \| *rm* \| *rule* \| *set* \| *set-tunable* \| *show-tunables* \| *tunables* \| *unlink* ] ...

| **ceph** **osd** **pool** [ *create* \| *delete* \| *get* \| *get-quota* \| *ls* \| *mksnap* \| *rename* \| *rmsnap* \| *set* \| *set-quota* \| *stats* ] ...

| **ceph** **osd** **tier** [ *add* \| *add-cache* \| *cache-mode* \| *remove* \| *remove-overlay* \| *set-overlay* ] ...

| **ceph** **pg** [ *debug* \| *deep-scrub* \| *dump* \| *dump_json* \| *dump_pools_json* \| *dump_stuck* \| *force_create_pg* \| *getmap* \| *ls* \| *ls-by-osd* \| *ls-by-pool* \| *ls-by-primary* \| *map* \| *repair* \| *scrub* \| *set_full_ratio* \| *set_nearfull_ratio* \| *stat* ] ...

| **ceph** **quorum** [ *enter* \| *exit* ]

| **ceph** **quorum_status**

| **ceph** **report** { *<tags>* [ *<tags>...* ] }

| **ceph** **scrub**

| **ceph** **status**

| **ceph** **sync** **force** {--yes-i-really-mean-it} {--i-know-what-i-am-doing}

| **ceph** **tell** *<name (type.id)> <args> [<args>...]*

| **ceph** **version**

Description
===========

:program:`ceph` is a control utility which is used for manual deployment and maintenance
of a Ceph cluster. It provides a diverse set of commands that allows deployment of
monitors, OSDs, placement groups, MDS and overall maintenance, administration
of the cluster.

Commands
========

auth
----

Manage authentication keys. It is used for adding, removing, exporting
or updating of authentication keys for a particular  entity such as a monitor or
OSD. It uses some additional subcommands.

Subcommand ``add`` adds authentication info for a particular entity from input
file, or random key if no input is given and/or any caps specified in the command.

Usage::

	ceph auth add <entity> {<caps> [<caps>...]}

Subcommand ``caps`` updates caps for **name** from caps specified in the command.

Usage::

	ceph auth caps <entity> <caps> [<caps>...]

Subcommand ``del`` deletes all caps for ``name``.

Usage::

	ceph auth del <entity>

Subcommand ``export`` writes keyring for requested entity, or master keyring if
none given.

Usage::

	ceph auth export {<entity>}

Subcommand ``get`` writes keyring file with requested key.

Usage::

	ceph auth get <entity>

Subcommand ``get-key`` displays requested key.

Usage::

	ceph auth get-key <entity>

Subcommand ``get-or-create`` adds authentication info for a particular entity
from input file, or random key if no input given and/or any caps specified in the
command.

Usage::

	ceph auth get-or-create <entity> {<caps> [<caps>...]}

Subcommand ``get-or-create-key`` gets or adds key for ``name`` from system/caps
pairs specified in the command.  If key already exists, any given caps must match
the existing caps for that key.

Usage::

	ceph auth get-or-create-key <entity> {<caps> [<caps>...]}

Subcommand ``import`` reads keyring from input file.

Usage::

	ceph auth import

Subcommand ``list`` lists authentication state.

Usage::

	ceph auth list

Subcommand ``print-key`` displays requested key.

Usage::

	ceph auth print-key <entity>

Subcommand ``print_key`` displays requested key.

Usage::

	ceph auth print_key <entity>


compact
-------

Causes compaction of monitor's leveldb storage.

Usage::

	ceph compact


config-key
----------

Manage configuration key. It uses some additional subcommands.

Subcommand ``del`` deletes configuration key.

Usage::

	ceph config-key del <key>

Subcommand ``exists`` checks for configuration keys existence.

Usage::

	ceph config-key exists <key>

Subcommand ``get`` gets the configuration key.

Usage::

	ceph config-key get <key>

Subcommand ``list`` lists configuration keys.

Usage::

	ceph config-key list

Subcommand ``put`` puts configuration key and values.

Usage::

	ceph config-key put <key> {<val>}


daemon
------

Submit admin-socket commands.

Usage::

	ceph daemon {daemon_name|socket_path} {command} ...

Example::

	ceph daemon osd.0 help


daemonperf
----------

Watch performance counters from a Ceph daemon.

Usage::

	ceph daemonperf {daemon_name|socket_path} [{interval} [{count}]]


df
--

Show cluster's free space status.

Usage::

	ceph df {detail}


fs
--

Manage cephfs filesystems. It uses some additional subcommands.

Subcommand ``ls`` to list filesystems

Usage::

	ceph fs ls

Subcommand ``new`` to make a new filesystem using named pools <metadata> and <data>

Usage::

	ceph fs new <fs_name> <metadata> <data>

Subcommand ``reset`` is used for disaster recovery only: reset to a single-MDS map

Usage::

	ceph fs reset <fs_name> {--yes-i-really-mean-it}

Subcommand ``rm`` to disable the named filesystem

Usage::

	ceph fs rm <fs_name> {--yes-i-really-mean-it}


fsid
----

Show cluster's FSID/UUID.

Usage::

	ceph fsid


health
------

Show cluster's health.

Usage::

	ceph health {detail}


heap
----

Show heap usage info (available only if compiled with tcmalloc)

Usage::

	ceph heap dump|start_profiler|stop_profiler|release|stats


injectargs
----------

Inject configuration arguments into monitor.

Usage::

	ceph injectargs <injected_args> [<injected_args>...]


log
---

Log supplied text to the monitor log.

Usage::

	ceph log <logtext> [<logtext>...]


mds
---

Manage metadata server configuration and administration. It uses some
additional subcommands.

Subcommand ``compat`` manages compatible features. It uses some additional
subcommands.

Subcommand ``rm_compat`` removes compatible feature.

Usage::

	ceph mds compat rm_compat <int[0-]>

Subcommand ``rm_incompat`` removes incompatible feature.

Usage::

	ceph mds compat rm_incompat <int[0-]>

Subcommand ``show`` shows mds compatibility settings.

Usage::

	ceph mds compat show

Subcommand ``deactivate`` stops mds.

Usage::

	ceph mds deactivate <who>

Subcommand ``fail`` forces mds to status fail.

Usage::

	ceph mds fail <who>

Subcommand ``rm`` removes inactive mds.

Usage::

	ceph mds rm <int[0-]> <name> (type.id)>

Subcommand ``rmfailed`` removes failed mds.

Usage::

	ceph mds rmfailed <int[0-]>

Subcommand ``set_state`` sets mds state of <gid> to <numeric-state>.

Usage::

	ceph mds set_state <int[0-]> <int[0-20]>

Subcommand ``stat`` shows MDS status.

Usage::

	ceph mds stat

Subcommand ``tell`` sends command to particular mds.

Usage::

	ceph mds tell <who> <args> [<args>...]

mon
---

Manage monitor configuration and administration. It uses some additional
subcommands.

Subcommand ``add`` adds new monitor named <name> at <addr>.

Usage::

	ceph mon add <name> <IPaddr[:port]>

Subcommand ``dump`` dumps formatted monmap (optionally from epoch)

Usage::

	ceph mon dump {<int[0-]>}

Subcommand ``getmap`` gets monmap.

Usage::

	ceph mon getmap {<int[0-]>}

Subcommand ``remove`` removes monitor named <name>.

Usage::

	ceph mon remove <name>

Subcommand ``stat`` summarizes monitor status.

Usage::

	ceph mon stat

mon_status
----------

Reports status of monitors.

Usage::

	ceph mon_status

osd
---

Manage OSD configuration and administration. It uses some additional
subcommands.

Subcommand ``blacklist`` manage blacklisted clients. It uses some additional
subcommands.

Subcommand ``add`` add <addr> to blacklist (optionally until <expire> seconds
from now)

Usage::

	ceph osd blacklist add <EntityAddr> {<float[0.0-]>}

Subcommand ``ls`` show blacklisted clients

Usage::

	ceph osd blacklist ls

Subcommand ``rm`` remove <addr> from blacklist

Usage::

	ceph osd blacklist rm <EntityAddr>

Subcommand ``blocked-by`` prints a histogram of which OSDs are blocking their peers

Usage::

	ceph osd blocked-by

Subcommand ``create`` creates new osd (with optional UUID and ID).

Usage::

	ceph osd create {<uuid>} {<id>}

Subcommand ``crush`` is used for CRUSH management. It uses some additional
subcommands.

Subcommand ``add`` adds or updates crushmap position and weight for <name> with
<weight> and location <args>.

Usage::

	ceph osd crush add <osdname (id|osd.id)> <float[0.0-]> <args> [<args>...]

Subcommand ``add-bucket`` adds no-parent (probably root) crush bucket <name> of
type <type>.

Usage::

	ceph osd crush add-bucket <name> <type>

Subcommand ``create-or-move`` creates entry or moves existing entry for <name>
<weight> at/to location <args>.

Usage::

	ceph osd crush create-or-move <osdname (id|osd.id)> <float[0.0-]> <args>
	[<args>...]

Subcommand ``dump`` dumps crush map.

Usage::

	ceph osd crush dump

Subcommand ``get-tunable`` get crush tunable straw_calc_version

Usage::

	ceph osd crush get-tunable straw_calc_version

Subcommand ``link`` links existing entry for <name> under location <args>.

Usage::

	ceph osd crush link <name> <args> [<args>...]

Subcommand ``move`` moves existing entry for <name> to location <args>.

Usage::

	ceph osd crush move <name> <args> [<args>...]

Subcommand ``remove`` removes <name> from crush map (everywhere, or just at
<ancestor>).

Usage::

	ceph osd crush remove <name> {<ancestor>}

Subcommand ``rename-bucket`` renames buchket <srcname> to <stname>

Usage::

	ceph osd crush rename-bucket <srcname> <dstname>

Subcommand ``reweight`` change <name>'s weight to <weight> in crush map.

Usage::

	ceph osd crush reweight <name> <float[0.0-]>

Subcommand ``reweight-all`` recalculate the weights for the tree to
ensure they sum correctly

Usage::

	ceph osd crush reweight-all

Subcommand ``reweight-subtree`` changes all leaf items beneath <name>
to <weight> in crush map

Usage::

	ceph osd crush reweight-subtree <name> <weight>

Subcommand ``rm`` removes <name> from crush map (everywhere, or just at
<ancestor>).

Usage::

	ceph osd crush rm <name> {<ancestor>}

Subcommand ``rule`` is used for creating crush rules. It uses some additional
subcommands.

Subcommand ``create-erasure`` creates crush rule <name> for erasure coded pool
created with <profile> (default default).

Usage::

	ceph osd crush rule create-erasure <name> {<profile>}

Subcommand ``create-simple`` creates crush rule <name> to start from <root>,
replicate across buckets of type <type>, using a choose mode of <firstn|indep>
(default firstn; indep best for erasure pools).

Usage::

	ceph osd crush rule create-simple <name> <root> <type> {firstn|indep}

Subcommand ``dump`` dumps crush rule <name> (default all).

Usage::

	ceph osd crush rule dump {<name>}

Subcommand ``list`` lists crush rules.

Usage::

	ceph osd crush rule list

Subcommand ``ls`` lists crush rules.

Usage::

	ceph osd crush rule ls

Subcommand ``rm`` removes crush rule <name>.

Usage::

	ceph osd crush rule rm <name>

Subcommand ``set`` used alone, sets crush map from input file.

Usage::

	ceph osd crush set

Subcommand ``set`` with osdname/osd.id update crushmap position and weight
for <name> to <weight> with location <args>.

Usage::

	ceph osd crush set <osdname (id|osd.id)> <float[0.0-]> <args> [<args>...]

Subcommand ``set-tunable`` set crush tunable <tunable> to <value>.  The only
tunable that can be set is straw_calc_version.

Usage::

	ceph osd crush set-tunable straw_calc_version <value>

Subcommand ``show-tunables`` shows current crush tunables.

Usage::

	ceph osd crush show-tunables

Subcommand ``tree`` shows the crush buckets and items in a tree view.

Usage::

	ceph osd crush tree

Subcommand ``tunables`` sets crush tunables values to <profile>.

Usage::

	ceph osd crush tunables legacy|argonaut|bobtail|firefly|hammer|optimal|default

Subcommand ``unlink`` unlinks <name> from crush map (everywhere, or just at
<ancestor>).

Usage::

	ceph osd crush unlink <name> {<ancestor>}

Subcommand ``df`` shows OSD utilization

Usage::

	ceph osd df {plain|tree}

Subcommand ``deep-scrub`` initiates deep scrub on specified osd.

Usage::

	ceph osd deep-scrub <who>

Subcommand ``down`` sets osd(s) <id> [<id>...] down.

Usage::

	ceph osd down <ids> [<ids>...]

Subcommand ``dump`` prints summary of OSD map.

Usage::

	ceph osd dump {<int[0-]>}

Subcommand ``erasure-code-profile`` is used for managing the erasure code
profiles. It uses some additional subcommands.

Subcommand ``get`` gets erasure code profile <name>.

Usage::

	ceph osd erasure-code-profile get <name>

Subcommand ``ls`` lists all erasure code profiles.

Usage::

	ceph osd erasure-code-profile ls

Subcommand ``rm`` removes erasure code profile <name>.

Usage::

	ceph osd erasure-code-profile rm <name>

Subcommand ``set`` creates erasure code profile <name> with [<key[=value]> ...]
pairs. Add a --force at the end to override an existing profile (IT IS RISKY).

Usage::

	ceph osd erasure-code-profile set <name> {<profile> [<profile>...]}

Subcommand ``find`` find osd <id> in the CRUSH map and shows its location.

Usage::

	ceph osd find <int[0-]>

Subcommand ``getcrushmap`` gets CRUSH map.

Usage::

	ceph osd getcrushmap {<int[0-]>}

Subcommand ``getmap`` gets OSD map.

Usage::

	ceph osd getmap {<int[0-]>}

Subcommand ``getmaxosd`` shows largest OSD id.

Usage::

	ceph osd getmaxosd

Subcommand ``in`` sets osd(s) <id> [<id>...] in.

Usage::

	ceph osd in <ids> [<ids>...]

Subcommand ``lost`` marks osd as permanently lost. THIS DESTROYS DATA IF NO
MORE REPLICAS EXIST, BE CAREFUL.

Usage::

	ceph osd lost <int[0-]> {--yes-i-really-mean-it}

Subcommand ``ls`` shows all OSD ids.

Usage::

	ceph osd ls {<int[0-]>}

Subcommand ``lspools`` lists pools.

Usage::

	ceph osd lspools {<int>}

Subcommand ``map`` finds pg for <object> in <pool>.

Usage::

	ceph osd map <poolname> <objectname>

Subcommand ``metadata`` fetches metadata for osd <id>.

Usage::

	ceph osd metadata {int[0-]} (default all)

Subcommand ``out`` sets osd(s) <id> [<id>...] out.

Usage::

	ceph osd out <ids> [<ids>...]

Subcommand ``pause`` pauses osd.

Usage::

	ceph osd pause

Subcommand ``perf`` prints dump of OSD perf summary stats.

Usage::

	ceph osd perf

Subcommand ``pg-temp`` set pg_temp mapping pgid:[<id> [<id>...]] (developers
only).

Usage::

	ceph osd pg-temp <pgid> {<id> [<id>...]}

Subcommand ``pool`` is used for managing data pools. It uses some additional
subcommands.

Subcommand ``create`` creates pool.

Usage::

	ceph osd pool create <poolname> <int[0-]> {<int[0-]>} {replicated|erasure}
	{<erasure_code_profile>} {<ruleset>} {<int>}

Subcommand ``delete`` deletes pool.

Usage::

	ceph osd pool delete <poolname> {<poolname>} {--yes-i-really-really-mean-it}

Subcommand ``get`` gets pool parameter <var>.

Usage::

	ceph osd pool get <poolname> size|min_size|crash_replay_interval|pg_num|
	pgp_num|crush_ruleset|auid|write_fadvise_dontneed

Only for tiered pools::

	ceph osd pool get <poolname> hit_set_type|hit_set_period|hit_set_count|hit_set_fpp|
	target_max_objects|target_max_bytes|cache_target_dirty_ratio|cache_target_dirty_high_ratio|
	cache_target_full_ratio|cache_min_flush_age|cache_min_evict_age|
	min_read_recency_for_promote|hit_set_grade_decay_rate|hit_set_search_last_n

Only for erasure coded pools::

	ceph osd pool get <poolname> erasure_code_profile

Use ``all`` to get all pool parameters that apply to the pool's type::

	ceph osd pool get <poolname> all

Subcommand ``get-quota`` obtains object or byte limits for pool.

Usage::

	ceph osd pool get-quota <poolname>

Subcommand ``ls`` list pools

Usage::

	ceph osd pool ls {detail}

Subcommand ``mksnap`` makes snapshot <snap> in <pool>.

Usage::

	ceph osd pool mksnap <poolname> <snap>

Subcommand ``rename`` renames <srcpool> to <destpool>.

Usage::

	ceph osd pool rename <poolname> <poolname>

Subcommand ``rmsnap`` removes snapshot <snap> from <pool>.

Usage::

	ceph osd pool rmsnap <poolname> <snap>

Subcommand ``set`` sets pool parameter <var> to <val>.

Usage::

	ceph osd pool set <poolname> size|min_size|crash_replay_interval|pg_num|
	pgp_num|crush_ruleset|hashpspool|nodelete|nopgchange|nosizechange|
	hit_set_type|hit_set_period|hit_set_count|hit_set_fpp|debug_fake_ec_pool|
	target_max_bytes|target_max_objects|cache_target_dirty_ratio|
	cache_target_dirty_high_ratio|
	cache_target_full_ratio|cache_min_flush_age|cache_min_evict_age|auid|
	min_read_recency_for_promote|write_fadvise_dontneed|hit_set_grade_decay_rate|
	hit_set_search_last_n
	<val> {--yes-i-really-mean-it}

Subcommand ``set-quota`` sets object or byte limit on pool.

Usage::

	ceph osd pool set-quota <poolname> max_objects|max_bytes <val>

Subcommand ``stats`` obtain stats from all pools, or from specified pool.

Usage::

	ceph osd pool stats {<name>}

Subcommand ``primary-affinity`` adjust osd primary-affinity from 0.0 <=<weight>
<= 1.0

Usage::

	ceph osd primary-affinity <osdname (id|osd.id)> <float[0.0-1.0]>

Subcommand ``primary-temp`` sets primary_temp mapping pgid:<id>|-1 (developers
only).

Usage::

	ceph osd primary-temp <pgid> <id>

Subcommand ``repair`` initiates repair on a specified osd.

Usage::

	ceph osd repair <who>

Subcommand ``reweight`` reweights osd to 0.0 < <weight> < 1.0.

Usage::

	osd reweight <int[0-]> <float[0.0-1.0]>

Subcommand ``reweight-by-pg`` reweight OSDs by PG distribution
[overload-percentage-for-consideration, default 120].

Usage::

	ceph osd reweight-by-pg {<int[100-]>} {<poolname> [<poolname...]}
	{--no-increasing}

Subcommand ``reweight-by-utilization`` reweight OSDs by utilization
[overload-percentage-for-consideration, default 120].

Usage::

	ceph osd reweight-by-utilization {<int[100-]>}
	{--no-increasing}

Subcommand ``rm`` removes osd(s) <id> [<id>...] in the cluster.

Usage::

	ceph osd rm <ids> [<ids>...]

Subcommand ``scrub`` initiates scrub on specified osd.

Usage::

	ceph osd scrub <who>

Subcommand ``set`` sets <key>.

Usage::

	ceph osd set full|pause|noup|nodown|noout|noin|nobackfill|
	norebalance|norecover|noscrub|nodeep-scrub|notieragent

Subcommand ``setcrushmap`` sets crush map from input file.

Usage::

	ceph osd setcrushmap

Subcommand ``setmaxosd`` sets new maximum osd value.

Usage::

	ceph osd setmaxosd <int[0-]>

Subcommand ``stat`` prints summary of OSD map.

Usage::

	ceph osd stat

Subcommand ``tier`` is used for managing tiers. It uses some additional
subcommands.

Subcommand ``add`` adds the tier <tierpool> (the second one) to base pool <pool>
(the first one).

Usage::

	ceph osd tier add <poolname> <poolname> {--force-nonempty}

Subcommand ``add-cache`` adds a cache <tierpool> (the second one) of size <size>
to existing pool <pool> (the first one).

Usage::

	ceph osd tier add-cache <poolname> <poolname> <int[0-]>

Subcommand ``cache-mode`` specifies the caching mode for cache tier <pool>.

Usage::

	ceph osd tier cache-mode <poolname> none|writeback|forward|readonly|
	readforward|readproxy

Subcommand ``remove`` removes the tier <tierpool> (the second one) from base pool
<pool> (the first one).

Usage::

	ceph osd tier remove <poolname> <poolname>

Subcommand ``remove-overlay`` removes the overlay pool for base pool <pool>.

Usage::

	ceph osd tier remove-overlay <poolname>

Subcommand ``set-overlay`` set the overlay pool for base pool <pool> to be
<overlaypool>.

Usage::

	ceph osd tier set-overlay <poolname> <poolname>

Subcommand ``tree`` prints OSD tree.

Usage::

	ceph osd tree {<int[0-]>}

Subcommand ``unpause`` unpauses osd.

Usage::

	ceph osd unpause

Subcommand ``unset`` unsets <key>.

Usage::

	ceph osd unset full|pause|noup|nodown|noout|noin|nobackfill|
	norebalance|norecover|noscrub|nodeep-scrub|notieragent


pg
--

It is used for managing the placement groups in OSDs. It uses some
additional subcommands.

Subcommand ``debug`` shows debug info about pgs.

Usage::

	ceph pg debug unfound_objects_exist|degraded_pgs_exist

Subcommand ``deep-scrub`` starts deep-scrub on <pgid>.

Usage::

	ceph pg deep-scrub <pgid>

Subcommand ``dump`` shows human-readable versions of pg map (only 'all' valid
with plain).

Usage::

	ceph pg dump {all|summary|sum|delta|pools|osds|pgs|pgs_brief} [{all|summary|sum|delta|pools|osds|pgs|pgs_brief...]}

Subcommand ``dump_json`` shows human-readable version of pg map in json only.

Usage::

	ceph pg dump_json {all|summary|sum|delta|pools|osds|pgs|pgs_brief} [{all|summary|sum|delta|pools|osds|pgs|pgs_brief...]}

Subcommand ``dump_pools_json`` shows pg pools info in json only.

Usage::

	ceph pg dump_pools_json

Subcommand ``dump_stuck`` shows information about stuck pgs.

Usage::

	ceph pg dump_stuck {inactive|unclean|stale|undersized|degraded [inactive|unclean|stale|undersized|degraded...]}
	{<int>}

Subcommand ``force_create_pg`` forces creation of pg <pgid>.

Usage::

	ceph pg force_create_pg <pgid>

Subcommand ``getmap`` gets binary pg map to -o/stdout.

Usage::

	ceph pg getmap

Subcommand ``ls`` lists pg with specific pool, osd, state

Usage::

	ceph pg ls {<int>} {active|clean|down|replay|splitting|
	scrubbing|scrubq|degraded|inconsistent|peering|repair|
	recovery|backfill_wait|incomplete|stale| remapped|
	deep_scrub|backfill|backfill_toofull|recovery_wait|
	undersized [active|clean|down|replay|splitting|
	scrubbing|scrubq|degraded|inconsistent|peering|repair|
	recovery|backfill_wait|incomplete|stale|remapped|
	deep_scrub|backfill|backfill_toofull|recovery_wait|
	undersized...]}

Subcommand ``ls-by-osd`` lists pg on osd [osd]

Usage::

	ceph pg ls-by-osd <osdname (id|osd.id)> {<int>}
	{active|clean|down|replay|splitting|
	scrubbing|scrubq|degraded|inconsistent|peering|repair|
	recovery|backfill_wait|incomplete|stale| remapped|
	deep_scrub|backfill|backfill_toofull|recovery_wait|
	undersized [active|clean|down|replay|splitting|
	scrubbing|scrubq|degraded|inconsistent|peering|repair|
	recovery|backfill_wait|incomplete|stale|remapped|
	deep_scrub|backfill|backfill_toofull|recovery_wait|
	undersized...]}

Subcommand ``ls-by-pool`` lists pg with pool = [poolname]

Usage::

	ceph pg ls-by-pool <poolstr> {<int>} {active|
	clean|down|replay|splitting|
	scrubbing|scrubq|degraded|inconsistent|peering|repair|
	recovery|backfill_wait|incomplete|stale| remapped|
	deep_scrub|backfill|backfill_toofull|recovery_wait|
	undersized [active|clean|down|replay|splitting|
	scrubbing|scrubq|degraded|inconsistent|peering|repair|
	recovery|backfill_wait|incomplete|stale|remapped|
	deep_scrub|backfill|backfill_toofull|recovery_wait|
	undersized...]}

Subcommand ``ls-by-primary`` lists pg with primary = [osd]

Usage::

	ceph pg ls-by-primary <osdname (id|osd.id)> {<int>}
	{active|clean|down|replay|splitting|
	scrubbing|scrubq|degraded|inconsistent|peering|repair|
	recovery|backfill_wait|incomplete|stale| remapped|
	deep_scrub|backfill|backfill_toofull|recovery_wait|
	undersized [active|clean|down|replay|splitting|
	scrubbing|scrubq|degraded|inconsistent|peering|repair|
	recovery|backfill_wait|incomplete|stale|remapped|
	deep_scrub|backfill|backfill_toofull|recovery_wait|
	undersized...]}

Subcommand ``map`` shows mapping of pg to osds.

Usage::

	ceph pg map <pgid>

Subcommand ``repair`` starts repair on <pgid>.

Usage::

	ceph pg repair <pgid>

Subcommand ``scrub`` starts scrub on <pgid>.

Usage::

	ceph pg scrub <pgid>

Subcommand ``set_full_ratio`` sets ratio at which pgs are considered full.

Usage::

	ceph pg set_full_ratio <float[0.0-1.0]>

Subcommand ``set_nearfull_ratio`` sets ratio at which pgs are considered nearly
full.

Usage::

	ceph pg set_nearfull_ratio <float[0.0-1.0]>

Subcommand ``stat`` shows placement group status.

Usage::

	ceph pg stat


quorum
------

Cause MON to enter or exit quorum.

Usage::

	ceph quorum enter|exit

Note: this only works on the MON to which the ``ceph`` command is connected.
If you want a specific MON to enter or exit quorum, use this syntax::

	ceph tell mon.<id> quorum enter|exit

quorum_status
-------------

Reports status of monitor quorum.

Usage::

	ceph quorum_status


report
------

Reports full status of cluster, optional title tag strings.

Usage::

	ceph report {<tags> [<tags>...]}


scrub
-----

Scrubs the monitor stores.

Usage::

	ceph scrub


status
------

Shows cluster status.

Usage::

	ceph status


sync force
----------

Forces sync of and clear monitor store.

Usage::

	ceph sync force {--yes-i-really-mean-it} {--i-know-what-i-am-doing}


tell
----

Sends a command to a specific daemon.

Usage::

	ceph tell <name (type.id)> <args> [<args>...]

version
-------

Show mon daemon version

Usage::

	ceph version

Options
=======

.. option:: -i infile

   will specify an input file to be passed along as a payload with the
   command to the monitor cluster. This is only used for specific
   monitor commands.

.. option:: -o outfile

   will write any payload returned by the monitor cluster with its
   reply to outfile.  Only specific monitor commands (e.g. osd getmap)
   return a payload.

.. option:: -c ceph.conf, --conf=ceph.conf

   Use ceph.conf configuration file instead of the default
   ``/etc/ceph/ceph.conf`` to determine monitor addresses during startup.

.. option:: --id CLIENT_ID, --user CLIENT_ID

   Client id for authentication.

.. option:: --name CLIENT_NAME, -n CLIENT_NAME

	Client name for authentication.

.. option:: --cluster CLUSTER

	Name of the Ceph cluster.

.. option:: --admin-daemon ADMIN_SOCKET, daemon DAEMON_NAME

	Submit admin-socket commands via admin sockets in /var/run/ceph.

.. option:: --admin-socket ADMIN_SOCKET_NOPE

	You probably mean --admin-daemon

.. option:: -s, --status

	Show cluster status.

.. option:: -w, --watch

	Watch live cluster changes.

.. option:: --watch-debug

	Watch debug events.

.. option:: --watch-info

	Watch info events.

.. option:: --watch-sec

	Watch security events.

.. option:: --watch-warn

	Watch warning events.

.. option:: --watch-error

	Watch error events.

.. option:: --version, -v

	Display version.

.. option:: --verbose

	Make verbose.

.. option:: --concise

	Make less verbose.

.. option:: -f {json,json-pretty,xml,xml-pretty,plain}, --format

	Format of output.

.. option:: --connect-timeout CLUSTER_TIMEOUT

	Set a timeout for connecting to the cluster.

.. option:: --no-increasing

	 ``--no-increasing`` is off by default. So increasing the osd weight is allowed
         using the ``reweight-by-utilization`` or ``test-reweight-by-utilization`` commands.
         If this option is used with these commands, it will help not to increase osd weight
         even the osd is under utilized.


Availability
============

:program:`ceph` is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to
the Ceph documentation at http://ceph.com/docs for more information.


See also
========

:doc:`ceph-mon <ceph-mon>`\(8),
:doc:`ceph-osd <ceph-osd>`\(8),
:doc:`ceph-mds <ceph-mds>`\(8)