mirror of
https://github.com/kdave/btrfs-progs
synced 2024-12-26 08:02:21 +00:00
1afe51d22d
Replace **bold** or ``quoted`` with :command:`line ...` that is supposed to be used verbatim. Signed-off-by: David Sterba <dsterba@suse.com>
255 lines
10 KiB
ReStructuredText
255 lines
10 KiB
ReStructuredText
btrfs-device(8)
|
|
===============
|
|
|
|
SYNOPSIS
|
|
--------
|
|
|
|
**btrfs device** <subcommand> <args>
|
|
|
|
DESCRIPTION
|
|
-----------
|
|
|
|
The :command:`btrfs device` command group is used to manage devices of the btrfs filesystems.
|
|
|
|
DEVICE MANAGEMENT
|
|
-----------------
|
|
|
|
.. include ch-volume-management-intro.rst
|
|
|
|
SUBCOMMAND
|
|
----------
|
|
|
|
add [-Kf] <device> [<device>...] <path>
|
|
Add device(s) to the filesystem identified by *path*.
|
|
|
|
If applicable, a whole device discard (TRIM) operation is performed prior to
|
|
adding the device. A device with existing filesystem detected by ``blkid(8)``
|
|
will prevent device addition and has to be forced. Alternatively the filesystem
|
|
can be wiped from the device using e.g. the ``wipefs(8)`` tool.
|
|
|
|
The operation is instant and does not affect existing data. The operation merely
|
|
adds the device to the filesystem structures and creates some block groups
|
|
headers.
|
|
|
|
``Options``
|
|
|
|
-K|--nodiscard
|
|
do not perform discard (TRIM) by default
|
|
-f|--force
|
|
force overwrite of existing filesystem on the given disk(s)
|
|
|
|
--enqueue
|
|
wait if there's another exclusive operation running, otherwise continue
|
|
|
|
remove [options] <device>|<devid> [<device>|<devid>...] <path>
|
|
Remove device(s) from a filesystem identified by <path>
|
|
|
|
Device removal must satisfy the profile constraints, otherwise the command
|
|
fails. The filesystem must be converted to profile(s) that would allow the
|
|
removal. This can typically happen when going down from 2 devices to 1 and
|
|
using the RAID1 profile. See the section *TYPICAL USECASES*.
|
|
|
|
The operation can take long as it needs to move all data from the device.
|
|
|
|
It is possible to delete the device that was used to mount the filesystem. The
|
|
device entry in the mount table will be replaced by another device name with
|
|
the lowest device id.
|
|
|
|
If the filesystem is mounted in degraded mode (*-o degraded*), special term
|
|
*missing* can be used for *device*. In that case, the first device that is
|
|
described by the filesystem metadata, but not present at the mount time will be
|
|
removed.
|
|
|
|
.. note::
|
|
In most cases, there is only one missing device in degraded mode,
|
|
otherwise mount fails. If there are two or more devices missing (e.g. possible
|
|
in RAID6), you need specify *missing* as many times as the number of missing
|
|
devices to remove all of them.
|
|
|
|
``Options``
|
|
|
|
--enqueue
|
|
wait if there's another exclusive operation running, otherwise continue
|
|
|
|
delete <device>|<devid> [<device>|<devid>...] <path>
|
|
Alias of remove kept for backward compatibility
|
|
|
|
replace <command> [options] <path>
|
|
Alias of whole command group *btrfs replace* for convenience. See
|
|
:doc:`btrfs-replace(8)<btrfs-replace>`.
|
|
|
|
ready <device>
|
|
Wait until all devices of a multiple-device filesystem are scanned and
|
|
registered within the kernel module. This is to provide a way for automatic
|
|
filesystem mounting tools to wait before the mount can start. The device scan
|
|
is only one of the preconditions and the mount can fail for other reasons.
|
|
Normal users usually do not need this command and may safely ignore it.
|
|
|
|
scan [options] [<device> [<device>...]]
|
|
Scan devices for a btrfs filesystem and register them with the kernel module.
|
|
This allows mounting multiple-device filesystem by specifying just one from the
|
|
whole group.
|
|
|
|
If no devices are passed, all block devices that blkid reports to contain btrfs
|
|
are scanned.
|
|
|
|
The options *--all-devices* or *-d* can be used as a fallback in case blkid is
|
|
not available. If used, behavior is the same as if no devices are passed.
|
|
|
|
The command can be run repeatedly. Devices that have been already registered
|
|
remain as such. Reloading the kernel module will drop this information. There's
|
|
an alternative way of mounting multiple-device filesystem without the need for
|
|
prior scanning. See the mount option *device*.
|
|
|
|
``Options``
|
|
|
|
-d|--all-devices
|
|
Enumerate and register all devices, use as a fallback in case blkid is not
|
|
available.
|
|
-u|--forget
|
|
Unregister a given device or all stale devices if no path is given, the device
|
|
must be unmounted otherwise it's an error.
|
|
|
|
stats [options] <path>|<device>
|
|
Read and print the device IO error statistics for all devices of the given
|
|
filesystem identified by *path* or for a single *device>. The filesystem must
|
|
be mounted. See section *DEVICE STATS* for more information about the reported
|
|
statistics and the meaning.
|
|
|
|
``Options``
|
|
|
|
-z|--reset
|
|
Print the stats and reset the values to zero afterwards.
|
|
|
|
-c|--check
|
|
Check if the stats are all zeros and return 0 if it is so. Set bit 6 of the
|
|
return code if any of the statistics is no-zero. The error values is 65 if
|
|
reading stats from at least one device failed, otherwise it's 64.
|
|
|
|
-T
|
|
Print stats in a tabular form, devices as rows and stats as columns
|
|
|
|
usage [options] <path> [<path>...]::
|
|
Show detailed information about internal allocations on devices.
|
|
|
|
The level of detail can differ if the command is run under a regular or the
|
|
root user (due to use of restricted ioctls). The first example below is for
|
|
normal user (warning included) and the next one with root on the same
|
|
filesystem:
|
|
|
|
.. code-block:: none
|
|
|
|
WARNING: cannot read detailed chunk info, per-device usage will not be shown, run as root
|
|
/dev/sdc1, ID: 1
|
|
Device size: 931.51GiB
|
|
Device slack: 0.00B
|
|
Unallocated: 931.51GiB
|
|
|
|
/dev/sdc1, ID: 1
|
|
Device size: 931.51GiB
|
|
Device slack: 0.00B
|
|
Data,single: 641.00GiB
|
|
Data,RAID0/3: 1.00GiB
|
|
Metadata,single: 19.00GiB
|
|
System,single: 32.00MiB
|
|
Unallocated: 271.48GiB
|
|
|
|
* *Device size* -- size of the device as seen by the filesystem (may be
|
|
different than actual device size)
|
|
* *Device slack* -- portion of device not used by the filesystem but
|
|
still available in the physical space provided by the device, e.g.
|
|
after a device shrink
|
|
* *Data,single*, *Metadata,single*, *System,single* -- in general, list
|
|
of block group type (Data, Metadata, System) and profile (single,
|
|
RAID1, ...) allocated on the device
|
|
* *Data,RAID0/3* -- in particular, striped profiles
|
|
RAID0/RAID10/RAID5/RAID6 with the number of devices on which the
|
|
stripes are allocated, multiple occurrences of the same profile can
|
|
appear in case a new device has been added and all new available
|
|
stripes have been used for writes
|
|
* *Unallocated* -- remaining space that the filesystem can still use
|
|
for new block groups
|
|
|
|
``Options``
|
|
|
|
-b|--raw
|
|
raw numbers in bytes, without the *B* suffix
|
|
-h|--human-readable
|
|
print human friendly numbers, base 1024, this is the default
|
|
|
|
-H
|
|
print human friendly numbers, base 1000
|
|
--iec
|
|
select the 1024 base for the following options, according to the IEC standard
|
|
--si
|
|
select the 1000 base for the following options, according to the SI standard
|
|
|
|
-k|--kbytes
|
|
show sizes in KiB, or kB with --si
|
|
-m|--mbytes
|
|
show sizes in MiB, or MB with --si
|
|
-g|--gbytes
|
|
show sizes in GiB, or GB with --si
|
|
-t|--tbytes
|
|
show sizes in TiB, or TB with --si
|
|
|
|
If conflicting options are passed, the last one takes precedence.
|
|
|
|
DEVICE STATS
|
|
------------
|
|
|
|
The device stats keep persistent record of several error classes related to
|
|
doing IO. The current values are printed at mount time and updated during
|
|
filesystem lifetime or from a scrub run.
|
|
|
|
.. code-block:: none
|
|
|
|
$ btrfs device stats /dev/sda3
|
|
[/dev/sda3].write_io_errs 0
|
|
[/dev/sda3].read_io_errs 0
|
|
[/dev/sda3].flush_io_errs 0
|
|
[/dev/sda3].corruption_errs 0
|
|
[/dev/sda3].generation_errs 0
|
|
|
|
write_io_errs
|
|
Failed writes to the block devices, means that the layers beneath the
|
|
filesystem were not able to satisfy the write request.
|
|
read_io_errors
|
|
Read request analogy to write_io_errs.
|
|
flush_io_errs
|
|
Number of failed writes with the *FLUSH* flag set. The flushing is a method of
|
|
forcing a particular order between write requests and is crucial for
|
|
implementing crash consistency. In case of btrfs, all the metadata blocks must
|
|
be permanently stored on the block device before the superblock is written.
|
|
corruption_errs
|
|
A block checksum mismatched or a corrupted metadata header was found.
|
|
generation_errs
|
|
The block generation does not match the expected value (e.g. stored in the
|
|
parent node).
|
|
|
|
Since kernel 5.14 the device stats are also available in textual form in
|
|
*/sys/fs/btrfs/FSID/devinfo/DEVID/error_stats*.
|
|
|
|
EXIT STATUS
|
|
-----------
|
|
|
|
**btrfs device** returns a zero exit status if it succeeds. Non zero is
|
|
returned in case of failure.
|
|
|
|
If the *-c* option is used, *btrfs device stats* will add 64 to the
|
|
exit status if any of the error counters is non-zero.
|
|
|
|
AVAILABILITY
|
|
------------
|
|
|
|
**btrfs** is part of btrfs-progs. Please refer to the documentation at
|
|
`https://btrfs.readthedocs.io <https://btrfs.readthedocs.io>`_.
|
|
|
|
SEE ALSO
|
|
--------
|
|
|
|
:doc:`btrfs-balance(8)<btrfs-balance>`
|
|
:doc:`btrfs-device(8)<btrfs-device>`,
|
|
:doc:`btrfs-replace(8)<btrfs-replace>`,
|
|
:doc:`mkfs.btrfs(8)<mkfs.btrfs>`,
|