The test fails inside travis, check for a multiple-profile detection.
This was verified to work on a proper host so the workaround is in place
let the whole suite pass.
Signed-off-by: David Sterba <dsterba@suse.com>
The new test case will test whether btrfs-convert can handle 64G ext*
fs.
This exercise the cctx->total_bytes calculation where multiplying 4K
(unsigned int) and 16777216 (u32) could lead to bit overflow for
unsigned int and got 0, and screw up later free space calculation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Kernel patch ff51bf02d107 ("btrfs: block-group: fix free-space bitmap
threshold") is needed to exercise both branches of the test, this can be
detected by lack of the objectid and offset parsed from the dump.
Issue: #288
Signed-off-by: David Sterba <dsterba@suse.com>
For workarounds or known missing support add helper to print a
notification about that, when _not_run is not suitable.
Signed-off-by: David Sterba <dsterba@suse.com>
Add a test case to check if the converted fs has device extent beyond
boundary.
The disk layout of source ext4 fs needs some extents to make them
allocated at the very end of the fs. The script is from the original
reporter.
Also, since the existing convert tests always uses 512M as device size,
which is not suitable for this test case, make it to grab the existing
device size to co-operate with this test case.
Reported-by: Jiachen YANG <farseerfc@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a test case to ensure we can create a 350M fs with 128M rootdir.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The image used in test case 035 has one problem:
- Bad total_bytes of device item in chunk tree
item 0 key (DEV_ITEMS DEV_ITEM 1) itemoff 16185 itemsize 98
devid 1 total_bytes 72564736 bytes_used 92274688
The total_bytes is even smaller than bytes_used.
While the dev_item in super block contains the correct value:
dev_item.total_bytes 134217728
dev_item.bytes_used 92274688
This patch will update the image, using the correct value in super block
to replace the wrong one in chunk tree.
So that later btrfs-image restore without device/chunk fixup can still
pass fsck-tests.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The image used in 012 has several problems:
- Bad dev_item total_bytes in superblock
dev_item.total_bytes 20918272
dev_item.bytes_used 67108864
The fs has 64M chunks allocated, and the original fs is also 64M.
Thus the total_bytes is completely wrong.
- Bad total_bytes in chunk tree
item 0 key (DEV_ITEMS DEV_ITEM 1) itemoff 3897 itemsize 98
devid 1 total_bytes 20918272 bytes_used 67108864
The same problem as super block.
This problem is covered by btrfs-image, as it will recalculate the
device size.
However if btrfs-image is doing exactly same data replay without any
modification, such bad image would cause test failure, as we're unable
to fix such bad total_bytes.
This patch will update the image to fix such problem.
Also since we're here, there is no need to use custom .tar.gz image, as
we have extra_image() to handle the uncompression.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Basic test of mkfs-time enabled quotas and filesystem filled with files.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The image has a csum item overlap with next csum item, make sure btrfs
check can detect it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enhance the clean-tests.sh script to detach all loop devices created by
tests, lookup is based on the path prefix. Now 'make test-clean' is
supposed to prepare the environment for next test round.
Signed-off-by: David Sterba <dsterba@suse.com>
Use simpler output format for easier parsing and place each block group
type on a separate line.
Example output:
WARNING: Multiple block group profiles detected, see 'man btrfs(5)'.
WARNING: Data: single, raid1
Signed-off-by: David Sterba <dsterba@suse.com>
Several commands now warn about multiple profiles as it is considered a
potentially problematic filesystem state that might need user attention.
- device delete
- device add
- balance pause
- balance cancel
- filesystem usage
WARNING: Multiple profiles detected. See 'man btrfs(5)'.
WARNING: data -> [raid1, single]
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
We want to inject $INSTRUMENT (mostly valgrind) before btrfs command but
after root_helper.
Currently we won't inject $INSTRUMENT at all if we are using
root_helper.
This means the coverage is not good enough.
[FIX]
This patch introduce a new function, expand_command(), to handle all
parameter/argument injection, including existing 'btrfs check' inject.
This function will:
- Detect where to inject $INSTRUMENT
If we have root_helper and the command is target command
(btrfs/mkfs.btrfs/btrfs-convert), then we inject $INSTRUMENT after
root_helper.
If we don't have root_helper, and the command is target command,
we inject $INSTRUMENT before the command.
Or we don't inject $INSTRUMENT (it's not the target command).
- Use existing spec facility to inject extra arguments
- Use an array to restore to result
To avoid bash interpret the IFS inside path/commands.
Now we can make sure no matter if we use root_helper, $INSTRUMENT is
always injected corrected.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since run_check_stdout() can insert INSTRUMENT for all btrfs related
programs, which could easily pollute the stdout, any caller of
run_check_stdout() should do proper filter.
The following callers are affected:
- misc/004
Filter the output of "btrfs ins min-dev-size"
- misc/009
- misc/013
- misc/024
They are all calling "btrfs ins rootid", so introduce get_subvolid()
function to grab the subvolid properly.
- misc/031
Loose the filter for "btrfs qgroup show". No need for "tail -n 1".
So we still have the same coverage, but now these tests won't cause
false alert if we insert INSTRUMENT for all btrfs commands.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As the TEST_TOP is often only a base path, the slash gets doubled. This
is not a problem as the slashes are in the middle of the path and cannot
be confused with the initial "//" that gets interpreted as a network
path. Update all the test drivers.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 31f477ee ("btrfs-progs: mkfs-tests: skip test if truncate fails
with EFBIG") tried to detect a failure in truncate command by checking
the $? expecting it to be an errno, when it actually returns 0 or 1.
To fix this test just check if the command failed (returned 1) and look
for the output, skipping the test if the OS cannot create a 6E file.
Fixes: #241
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With INSTRUMENT=valgrind set, some fsck tests will fail, e.g. fsck/013:
====== RUN CHECK mount -t btrfs -o loop /home/adam/btrfs/btrfs-progs/tests//test.img /home/adam/btrfs/btrfs-progs/tests//mnt
==114106==
==114106== Warning: Can't execute setuid/setgid/setcap executable: /usr/bin/mount
==114106== Possible workaround: remove --trace-children=yes, if in effect
==114106==
valgrind: /usr/bin/mount: Permission denied
failed: mount -t btrfs -o loop /home/adam/btrfs/btrfs-progs/tests//test.img /home/adam/btrfs/btrfs-progs/tests//mnt
test failed for case 013-extent-tree-rebuild
[CAUSE]
Just as stated by valgrind itself, it can't handle program with
setuid/setgid/setcap.
Thankfully in our case it's mount and we don't really care about it at
all.
[FIX]
Although we could use complex skip pattern to skip mount in valgrind, we
don't really want to run valgrind on mount or sudo command anyway.
So here we do extra check if we're running mount command. And if that's
the case, just skip $INSTRUMENT command.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cleanups done separately:
* use the default test image, loop devices not needed for the test
* trim TEST_MNT from all paths
* send output is created inside the test filesystem
Signed-off-by: David Sterba <dsterba@suse.com>
This test case is the reproducer for the previous fix.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Skip the test 013-subvolume-delete-by-id if the first valid attempt to
use the ioctl fails with 'Inappropriate ioctl for device'.
Signed-off-by: David Sterba <dsterba@suse.com>
Add a variant of mayfail helper that will duplicate the output to
results log and also provides it to the caller for processing. Can be
used for catching unsupported functionality or other special cases.
Signed-off-by: David Sterba <dsterba@suse.com>
Move the check of dmsetup to check_dm_target_support, and adapt the only
two places checking if dmsetup is present in the system. Now we skip the
tests if dmsetup isn't available, instead of marking the test as failed.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This way we ensure the linear target is available and skip the test.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If dm-thin or dm-linear are not supported, let's skip the test
altogether instead of throwing an error.
Issue: #192
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function will be used later to test if dm-thin is supported.
Suggested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
One reload_btrfs is lost, add it.
Fixes: 0de2e22ad2 ("btrfs-progs: tests: Add tests for changing fsid feature")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The truncate command can fail in some platforms like PPC32 because it
can't create files up to 6EiB in size. Skip the test if this was the
problem why truncate failed.
Issue: #192
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enhance the prerequisite check for internal tools, up to now missing
btrfs-find-root and btrfs-select-super. The correct path in the checks
is INTERNAL_BIN.
The testsuite is now self-contained.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These two binaries are not usually shipped with the package, but they
are used by the testsuite, they need to be included in the exported tar.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As seem in issue #192, this test can fail from time to time. The
issue happens when a mount is issued before the new device is processed
by systemd-udevd, as we can see by the og bellow:
[ 2346.028809] BTRFS: device fsid 593e23af-a7e6-4360-b16a-229f415de697 devid 1 transid 6 /dev/loop10 scanned by systemd-udevd (3418)
[ 2346.265401] BTRFS info (device loop10): found metadata UUID change in progress flag, clearing
[ 2346.272474] BTRFS info (device loop10): disk space caching is enabled
[ 2346.277472] BTRFS info (device loop10): has skinny extents
[ 2346.281840] BTRFS info (device loop10): flagging fs with big metadata feature
[ 2346.308428] BTRFS error (device loop10): devid 2 uuid cde07de6-db7e-4b34-909e-d3db6e7c0b06 is missing
[ 2346.315363] BTRFS error (device loop10): failed to read the system array: -2
[ 2346.329887] BTRFS error (device loop10): open_ctree failed
failed: mount /dev/loop10 /home/marcos/git/suse/btrfs-progs/tests//mnt
test failed for case 034-metadata-uuid
make: *** [Makefile:401: test-misc] Error 1
[ 2346.666865] BTRFS: device fsid 593e23af-a7e6-4360-b16a-229f415de697 devid 2 transid 5 /dev/loop11 scanned by systemd-udevd (3422)
[ 2346.853233] BTRFS: device fsid 1c2debeb-e829-4d6b-84df-aa7c5d246fd5 devid 1 transid 7 /dev/loop6 scanned by systemd-udevd (3418)
A few moments after the test failed systemd-udevd processed the new
device (registered the new device under btrfs). This can be tested by
executing a mount after the test failed, resulting in a successful
mount:
$ mount /dev/loop10 /mnt
[ 2398.955254] BTRFS info (device loop10): found metadata UUID change in progress flag, clearing
[ 2398.959416] BTRFS info (device loop10): disk space caching is enabled
[ 2398.962483] BTRFS info (device loop10): has skinny extents
[ 2398.965070] BTRFS info (device loop10): flagging fs with big metadata feature
[ 2399.012617] BTRFS info (device loop10): enabling ssd optimizations
[ 2399.022375] BTRFS info (device loop10): checking UUID tree
This problem can be avoided is we execute "udevadm settle" before the
mount is executed.
Issue: #192
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Don't hardcode the supported checksums and use the list provided by the
kernel module. The status check of support is moved to the top of the
script so it's more visible.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
[ move checks ]
Signed-off-by: David Sterba <dsterba@suse.com>
There are two utilities that are required for the testsuite but not
installed on systems. The path in tests must be INTERNAL_BIN.
Fix this issue for below tests:
* fsck-tests/013-extent-tree-rebuild
* fsck-tests/037-freespacetree-repair
* misc-tests/038-backup-root-corruption
Issue: #198
Signed-off-by: Long An <lan@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds cooked images to exercise the case when a filesystem with
metadata uuid incompat flag is switched back to having fsid/metadata
uuid being equal.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new image has a bad data extent item generation:
item 0 key (13631488 EXTENT_ITEM 4096) itemoff 16230 itemsize 53
refs 1 gen 16384 flags DATA
extent data backref root FS_TREE objectid 257 offset 0 count 1
Just like what older `btrfs check --init-extent-tree` could cause.
Reviewed-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Ran misc-tests/038 in /root/btrfs-progs:
make test-misc TEST=038\*
[TEST] misc-tests.sh
[TEST/misc] 038-backup-root-corruption
./test.sh: line 33: [: bytenr=65536,: integer expression expected
Backup slot 2 is not in use
test failed for case 038-backup-root-corruption
make: *** [Makefile:401: test-misc] Error 1
It's caused by the wrong line filtered by
$(dump_super | grep root | head -n1 | awk '{print $2}').
The command $(dump-super | grep root) outputs:
superblock: bytenr=65536, device=/root/btrfs-progs/tests/test.img
root 30605312
chunk_root_generation 5
root_level 0
chunk_root 22036480
chunk_root_level 0
log_root 0
log_root_transid 0
log_root_level 0
root_dir 6
backup_roots[4]:
Here
"superblock: bytenr=65536, device=/root/btrfs-progs/tests/test.img" is
selected but not the line "root 30605312".
Restricting the awk rule can fix it.
Fixes: 78a3831d46 ("btrfs-progs: tests: Test backup root retention logic")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit e388bf38 ("btrfs-progs: check: warn users about the
possible dangers of --repair") `btrfs check --repair` will wait 10
seconds before really repair the fs.
This hugely slow down the fsck tests. Add --force for check_image()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
