Add new btrfsck option, '--chunk-root', to specify chunk root bytenr.
And allow open_ctree_fs_info() function accept chunk_root_bytenr to
override the bytenr in superblock. This will be mainly used when chunk
tree corruption.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since open_ctree_fs_info() now may return a fs_info even without any
roots, modify functions like read_tree_block() to operate with such
fs_info.
This provides the basis for btrfs-find-root to operate on chunk tree
with corrupted fs.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ coding style adjustments, unified declarations ]
Signed-off-by: David Sterba <dsterba@suse.com>
Current open_ctree_fs_info() won't return anything if chunk tree root is
corrupted.
This makes some function, like btrfs-find-root, unable to find any older
chunk tree root, even it is possible to use system_chunk_array in super
block.
And at least two users in mail list has reported such heavily chunk
corruption.
Although we have 'btrfs rescue chunk-recovery' but it's too time
consuming and sometimes not able to cope with a specific filesystem
corruption.
This patch adds a new open ctree flag,
OPEN_CTREE_IGNORE_CHUNK_TREE_ERROR, allowing fs_info to be returned from
open_ctree_fs_info() even there is no valid tree root in it.
Also adds a new close_ctree() variant, close_ctree_fs_info() to handle
possible fs_info without any root.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ adjusted error messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
To start, let's tell btrfs-progs to read the free space root and how to
print the on-disk format of the free space tree. However, we're not
adding the FREE_SPACE_TREE read-only compat bit to the set of supported
bits because progs doesn't know how to keep the free space tree
consistent.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enhance chunk validation:
1) Num_stripes
We already have such check but it's only in super block sys chunk
array.
Now check all on-disk chunks.
2) Chunk logical
It should be aligned to sector size.
This behavior should be *DOUBLE CHECKED* for 64K sector size like
PPC64 or AArch64.
Maybe we can found some hidden bugs.
3) Chunk length
Same as chunk logical, should be aligned to sector size.
4) Stripe length
It should be power of 2.
5) Chunk type
Any bit out of TYPE_MAS | PROFILE_MASK is invalid.
With all these much restrict rules, several fuzzed image reported in
mail list should no longer cause btrfsck error.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch is generated from a coccinelle semantic patch:
identifier t;
expression e;
statement s;
@@
-t = malloc(e);
+t = calloc(1, e);
(
if (!t) s
|
if (t == NULL) s
|
)
-memset(t, 0, e);
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
[squashed patches into one]
Signed-off-by: David Sterba <dsterba@suse.com>
Now btrfs-progs will have much more strict superblock checks based on
kernel superblock checks.
This should prevent crashes or invalid memory access on crafted or
fuzzed images.
Based on kernel commit c926093ec516f5d316ecdf8c1be11f577ac71b85 .
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[added reference to kernel and comments]
Signed-off-by: David Sterba <dsterba@suse.com>
Before the patch, btrfs-progs will only read sizeof(struct
btrfs_super_block) and restore it into super_copy.
This makes checksum check for superblock impossible. Change it to read
the whole superblock.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
fsck-tests.sh failed and show following message in my node:
# ./fsck-tests.sh
[TEST] 001-bad-file-extent-bytenr
disk-io.c:1444: write_dev_supers: Assertion `ret != BTRFS_SUPER_INFO_SIZE` failed.
/root/btrfsprogs/btrfs-image(write_all_supers+0x2d2)[0x41031c]
/root/btrfsprogs/btrfs-image(write_ctree_super+0xc5)[0x41042e]
/root/btrfsprogs/btrfs-image(btrfs_commit_transaction+0x208)[0x410976]
/root/btrfsprogs/btrfs-image[0x438780]
/root/btrfsprogs/btrfs-image(main+0x3d5)[0x438c5c]
/lib64/libc.so.6(__libc_start_main+0xfd)[0x335e01ecdd]
/root/btrfsprogs/btrfs-image[0x4074e9]
failed to restore image /root/btrfsprogs/tests/fsck-tests/001-bad-file-extent-bytenr/default_case.img
#
# cat fsck-tests-results.txt
=== Entering /root/btrfsprogs/tests/fsck-tests/001-bad-file-extent-bytenr
restoring image default_case.img
failed to restore image /root/btrfsprogs/tests/fsck-tests/001-bad-file-extent-bytenr/default_case.img
#
Reason:
I run above test in a NFS mountpoint, it don't have enouth space to write
all superblock to image file, and don't support sparse file.
So write_dev_supers() failed in writing sb and output above message.
It takes me quite of time to know what happened, we can save these time
by output exact information in write-sb-fail case.
After patch:
# ./fsck-tests.sh
[TEST] 001-bad-file-extent-bytenr
WARNING: Write sb failed: File too large
disk-io.c:1492: write_all_supers: Assertion `ret` failed.
...
#
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Offline btrfs tools, like btrfs-image, will infinitely loop when there
is missing device.
The reason is, for missing device, it's fd will be set to -1, but before
we reading, we only check the fd validation by checking if it's 0.
So in that case, -1 will pass the validation check, and cause pread to
return 0, and loop to read.
Just change the validation check from "== 0" to "<= 0" to avoid such
problem.
Reported-by: Timothy Normand Miller <theosib@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We forgot free raid_map for raid56's map_bio.
This patch add it.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As chunk tree is only stored in super block, chunk tree commit doesn't
need to go through tree root update.
Or a BUG_ON will be triggered.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the following tree block check to avoid memory corruption on hostile
image:
1) Check level.
Level >= BTRFS_MAX_LEVEL won't be read out.
2) Nritems.
For nr_items > max_nritems, the tree_block won't be read out.
Max nritems is calculated in a easy method.
For node, it's straightforward, just (nodesize - header size) /
(btrfs_key_ptr)
For leaf, (nodesize - header size) / (btrfs_item), as btrfs support zero
item size
This fixes 3 kernel bugs: BZ#97171, BZ#97191, BZ#97271.
Reported-by: Lukas Lueg <lukas.lueg@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Export write_tree_block() function and allow it write extent without
transaction.
This provides the basis for later uuid change function.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Now open_ctree will exit if it found the superblock is marked
CHANGING_FSID, except given IGNORE_FSID open ctree flags.
Kernel will do the same thing later.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[removed the chunk tree flag, reworded the error message]
Signed-off-by: David Sterba <dsterba@suse.cz>
Add new flag CHUNK_ONLY and internal used only flag __RETURN_CHUNK.
CHUNK_ONLY will imply __RETURN_CHUNK, SUPPRESS_ERROR and PARTIAL, which
will allow the fs to be opened with only chunk tree OK.
This will improve the usability for btrfs-find-root.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Add new open ctree flag OPEN_CTREE_SUPPRESS_CHECK_BLOCK_ERRORS to
suppress tree block csum error output.
Provides the basis for new btrfs-find-root and other enhancement on
btrfs offline tools output.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[renamed vars and funcs, added comments]
Signed-off-by: David Sterba <dsterba@suse.cz>
Before this patch, check_tree_block() will print error on bytenr
mismatch but don't output error on fsid mismatch.
This patch will modify check_tree_block(), so it will only return errno
but not print error messages.
The error message will be output by print_tree_block_err() function.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[renamed and cleaned return codes]
Signed-off-by: David Sterba <dsterba@suse.cz>
When we go to fixup the dev items after a restore we scan all existing devices.
If you happen to be a btrfs developer you could possibly open up some random
device that you didn't just restore onto, which gives you weird errors and makes
you super cranky and waste a day trying to figure out what is failing. This
will make it so that we use the fd we've already opened for opening our ctree.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
We hold a transaction open for the entirety of fixing extent refs. This works
out ok most of the time but we can be tight on space and run out of space when
fixing things. To get around this just push down the transaction starting dance
into the functions that actually fix things. This keeps us from ending up with
ENOSPC because we pinned everything and allows the code to be a bit simpler.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Allow read_tree_block() and read_node_slot() to return error pointer.
This should help caller to get more specified error number.
For existing callers, change (!eb) judgmentt to
(!extent_buffer_uptodate(eb)) to keep the compatibility, and for caller
missing the check, use PTR_ERR(eb) if possible.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Before this patch, when a extent's data ref points to a invalid key in
fs tree, this happens if a leaf/node of fs tree is corrupted, btrfsck
can't do any repair and just exit.
In fact, such problem can be handled in fs tree repair routines, rebuild
the inode item(if missing) and add back the extent data (with some
assumption).
So this patch records such data extent refs for later fs tree recovery
routine.
TODO:
Restore orphan data extent refs into btrfs_root is not the best
method. It's best to directly restore it into inode_record, however
current extent tree and fs tree can't cooperate together, so use
btrfs_root as a temporary storage until inode_cache is built.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
glibc 2.10+ (5+ years old) enables all the desired features:
_XOPEN_SOURCE 700, __XOPEN2K8, POSIX_C_SOURCE, DEFAULT_SOURCE; with a
single _GNU_SOURCE define in the makefile alone. For portability to
other libc implementations (e.g. dietlibc) _XOPEN_SOURCE=700 is also
defined.
This also resolves Debian bug report filed by Michael Tautschnig -
"Inconsistent use of _XOPEN_SOURCE results in conflicting
declarations". Whilst I was not able to reproduce the results, the
reported fact is that _XOPEN_SOURCE set to 500 in one set of files
(e.g. cmds-filesystem.c) generates/defines different struct stat from
other files (cmds-replace.c).
This patch thus cleans up all feature defines, and sets them at a
consistent level.
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747969
Signed-off-by: Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When compiled with clang, the following warning is outputted.
disk-io.c:1017:15: warning: comparison of unsigned expression < 0 is
always false [-Wtautological-compare]
if (dev_size < 0)
~~~~~~~~ ^ ~
1 warning generated.
This is because dev_size is defined as unsigned type, but lseek() will
return singed valued.
So the judgement will always to false.
Use temporary off_t return value to solve it.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When using btrfs check with -s option, if using '-s 2' on a small
device which doesn't have the third superblock, "No valid Btrfs found"
will be output, but it is not appropriate.
So check sb_bytenr against device size before scanning a device and
output proper error message.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We were failing to fsck a volume because we couldn't open the log tree, which is
not helpful. Make us skip erroring out if we are using OPEN_CTREE_PARTIAL since
it isn't a mandatory tree. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_scan_lblikd() is called by most the device related command functions.
And btrfs_scan_lblkid() is most expensive function and it becomes more expensive
as number of devices in the system increase. Further some threads call this
function more than once for absolutely no extra benefit and the real waste of
resources. Below list of threads and number of times btrfs_scan_lblkid()
is called in that thread.
btrfs-find-root 1
btrfs rescue super-recover 2
btrfs-debug-tree 1
btrfs-image -r 2
btrfs check 2
btrfs restore 2
calc-size NC
btrfs-corrupt-block NC
btrfs-image NC
btrfs-map-logical 1
btrfs-select-super NC
btrfstune 2
btrfs-zero-log NC
tester NC
quick-test.c NC
btrfs-convert 0
mkfs #number of devices to be mkfs
btrfs label set unmounted 2
btrfs get label unmounted 2
This patch will:
move out calling register_one_device with in btrfs_scan_lblkid()
and so function setting the BTRFS_UPDATE_KERNEL to yes will
call btrfs_register_all_devices() separately.
introduce a global variable scan_done, which is set when scan is
done succssfully per thread. So that following calls to this function
will just return success.
Further if any function needs to force scan after scan_done is set,
then it can be done when there is such a requirement, but as of now there
isn't any such requirement.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_setup_all_roots() had some copy and pasted code for trying to
setup a root and then creating a blank node if that failed. The copy
for the csum_root created the blank node in the extent_root.
So we create a function to use a consistent root.
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
This change adds code to detect and fix the issue introduced in the kernel
release 3.17, where creation of read-only snapshots lead to a corrupted
filesystem if they were created at a moment when the source subvolume/snapshot
had orphan items. The issue was that the on-disk root items became incorrect,
referring to the pre orphan cleanup root node instead of the post orphan
cleanup root node.
A test filesystem can be generated with the test case recently submitted for
xfstests/fstests, which is essencially the following (bash script):
workout()
{
ops=$1
procs=$2
num_snapshots=$3
_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
snapshot_cmd="$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT"
snapshot_cmd="$snapshot_cmd $SCRATCH_MNT/snap_\`date +'%H_%M_%S_%N'\`"
run_check $FSSTRESS_PROG -p $procs \
-x "$snapshot_cmd" -X $num_snapshots -d $SCRATCH_MNT -n $ops
}
ops=10000
procs=4
snapshots=500
workout $ops $procs $snapshots
Example of btrfsck's (btrfs check) behaviour against such filesystem:
$ btrfsck /dev/loop0
root item for root 311, current bytenr 44630016, current gen 60, current level 1, new bytenr 44957696, new gen 61, new level 1
root item for root 1480, current bytenr 1003569152, current gen 1271, current level 1, new bytenr 1004175360, new gen 1272, new level 1
root item for root 1509, current bytenr 1037434880, current gen 1300, current level 1, new bytenr 1038467072, new gen 1301, new level 1
root item for root 1562, current bytenr 33636352, current gen 1354, current level 1, new bytenr 34455552, new gen 1355, new level 1
root item for root 3094, current bytenr 1011712000, current gen 2935, current level 1, new bytenr 1008484352, new gen 2936, new level 1
root item for root 3716, current bytenr 80805888, current gen 3578, current level 1, new bytenr 73515008, new gen 3579, new level 1
root item for root 4085, current bytenr 714031104, current gen 3958, current level 1, new bytenr 716816384, new gen 3959, new level 1
Found 7 roots with an outdated root item.
Please run a filesystem check with the option --repair to fix them.
$ echo $?
1
$ btrfsck --repair /dev/loop0
enabling repair mode
fixing root item for root 311, current bytenr 44630016, current gen 60, current level 1, new bytenr 44957696, new gen 61, new level 1
fixing root item for root 1480, current bytenr 1003569152, current gen 1271, current level 1, new bytenr 1004175360, new gen 1272, new level 1
fixing root item for root 1509, current bytenr 1037434880, current gen 1300, current level 1, new bytenr 1038467072, new gen 1301, new level 1
fixing root item for root 1562, current bytenr 33636352, current gen 1354, current level 1, new bytenr 34455552, new gen 1355, new level 1
fixing root item for root 3094, current bytenr 1011712000, current gen 2935, current level 1, new bytenr 1008484352, new gen 2936, new level 1
fixing root item for root 3716, current bytenr 80805888, current gen 3578, current level 1, new bytenr 73515008, new gen 3579, new level 1
fixing root item for root 4085, current bytenr 714031104, current gen 3958, current level 1, new bytenr 716816384, new gen 3959, new level 1
Fixed 7 roots.
Checking filesystem on /dev/loop0
UUID: 2186e9b9-c977-4a35-9c7b-69c6609d4620
checking extents
checking free space cache
cache and super generation don't match, space cache will be invalidated
checking fs roots
checking csums
checking root refs
found 618537000 bytes used err is 0
total csum bytes: 130824
total tree bytes: 601620480
total fs tree bytes: 580288512
total extent tree bytes: 18464768
btree space waste bytes: 136939144
file data blocks allocated: 34150318080
referenced 27815415808
Btrfs v3.17-rc3-2-gbbe1dd8
$ echo $?
0
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now commands mentioned below (with in [..]) are calling call register-device
ioctl BTRFS_IOC_SCAN_DEV for all the devices in the system.
Some issues with it:
BTRFS_IOC_SCAN_DEV: ioctl is a write operation, we don't want command like
btrfs-debug-tree threads to do that..
eg:
----
$ cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
0
$ btrfs-debug-tree /dev/sde (num_device > 1)
$ cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
5
----
btrfs_scan_fs_devices() ends up calling this ioctl only when num_device > 1.
That's inconsistency with in feature/bug.
We don't have to register _all_ the btrfs devices (again) in the system
without user consent.
Why its inconsistent:
function btrfs_scan_fs_devices() calls btrfs_scan_lblkid only when
num_devices is > 1, which in turn calls BTRFS_IOC_SCAN_DEV ioctl, if
conditions are met.
But main issue is we have too many consumers of btrfs_scan_fs_devices()
the names below with in [] is the cli leading to this function.
open_ctree_broken() [btrfs-find-root]
recover_prepare() [btrfs rescue super-recover]
__open_ctree_fd
(updates always except when flag OPEN_CTREE_RECOVER_SUPER is set and
flag OPEN_CTREE_RECOVER_SUPER is set only by 'btrfs rescue super-
recover' but still this thread sneaks through the open_ctree function
to call register-device-ioctl as show below).
open_ctree_fs_info
[btrfs-debug-tree]
[btrfs-image -r]
[btrfs check]
open_fs
[btrfs restore]
open_ctree
[calc-size]
[btrfs-corrupt-block]
[btrfs-image] (create)
[btrfs-map-logical]
[btrfs-select-super]
[btrfstune]
[btrfs-zero-log]
[tester]
[mkfs]
[quick-test.c]
[btrfs label set unmounted]
[btrfs get label unmounted]
[btrfs rescue super-recover]
open_ctree_fd
[btrfs-convert]
Fix:
In an effort to make register-device consistent, all calls to
btrfs_scan_fs_devices() will have 5th parameter set to 0. that means
we don't need 5th parameter at all. And with this function not calling
the register ioctl at all, finally we will have following two cli to call
the ioctl BTRFS_IOC_SCAN_DEV.
btrfs dev scan and
mkfs.btrfs
Threads needing to update kernel about a device would have to use
btrfs_register_one_device() separately.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
These were added to deal with duplicated functionality within btrfs-progs, but
we specifically copied rbtree.c from the kernel, so move these functions out
into their own file. This will make it easier to keep rbtree.c in sync. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If checksum root is corrupted, fsck will get segmentation. This
is because if we fail to load checksum root, root's node is NULL which
cause NULL pointer deferences later.
To fix this problem, we just did something like extent tree rebuilding.
Allocate a new one and clear uptodate flag. We will do sanity check
before fsck going on.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If btrfs tree root is corrupted, fsck will hit the following segmentation.
enabling repair mode
Check tree block failed, want=29376512, have=0
Check tree block failed, want=29376512, have=0
Check tree block failed, want=29376512, have=0
Check tree block failed, want=29376512, have=0
Check tree block failed, want=29376512, have=0
read block failed check_tree_block
Couldn't read tree root
Checking filesystem on /dev/sda9
UUID: 0e1a754d-04a5-4256-ae79-0f769751803e
Critical roots corrupted, unable to fsck the FS
Segmentation fault (core dumped)
In btrfs_setup_all_roots(), we could tolerate some trees(extent tree, csum tree)
corrupted, and we have did careful check inside that function, it will
return NULL if critial roots corrupt(for example tree root).
The problem is that we check @OPEN_CTREE_PARTIAL flag again after
calling btrfs_setup_all_roots() which will successfully return
@fs_info though critial roots corrupted.
Fix this problem by removing @OPEN_CTREE_PARTIAL flag check outsize
btrfs_setup_all_roots().
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The libblkid scan method which was introduced later, will also
scan devices under /proc/partitions. So we don't have to do
the explicit scan of the same.
Remove the scan method BTRFS_SCAN_PROC.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If we didn't find what we are looking for in /proc/partitions,
we're not going to find it by scanning every node under /dev, either.
But that's just what btrfs_scan_for_fsid() does.
Remove that fallback; at that point btrfs_scan_for_fsid() just calls
scan_for_btrfs(), so remove the wrapper & call it directly.
Side note: so, these paths always use /proc/partitions, not libblkid.
Userspace-intiated scans default to libblkid. I presume this is
part of the design, and intentional? Anyway, not changing it now!
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We use the read extent buffer infrastructure to read the super block when we are
creating a btrfs-image. This works out fine most of the time except when the fs
has been balanced, then it fails to map the super block. So we could fix
btrfs-image to read in the super in a special way, but thats more code. So
instead just check in the eb reading code if we are reading the super and then
don't bother mapping the block, just read the actual offset. This fixed some
poor guy who was trying to btrfs-image his fs that had been balanced. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
David sent a quick patch that removed a BUG_ON(). I took a peek and
found that the function was already leaking an eb ref and only returned
0. So this fixes the leak and makes the function void and fixes up the
callers.
Accidentally-motivated-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
Btrfs-progs superblock checksum check is somewhat too restricted for
super-recover, since current btrfs-progs will only read the 1st
superblock and if you need super-recover the 1st superblock is
possibly already damaged.
The fix is introducing super_recover parameter for
btrfs_read_dev_super() and callers to allow scan backup superblocks if
needed.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When encountering a corrupted fs root node, fsck hit following message:
Check tree block failed, want=29360128, have=0
Check tree block failed, want=29360128, have=0
Check tree block failed, want=29360128, have=0
Check tree block failed, want=29360128, have=0
Check tree block failed, want=29360128, have=0
read block failed check_tree_block
Checking filesystem on /dev/sda9
UUID: 0d295d80-bae2-45f2-a106-120dbfd0e173
checking extents
Segmentation fault (core dumped)
This is because in btrfs_setup_all_roots(), we check
btrfs_read_fs_root() return value by verifing whether it is
NULL pointer, this is wrong since btrfs_read_fs_root() return
PTR_ERR(ret), fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch adds functionality (in qgroup-verify.c) to compute bytecounts in
subvolume quota groups. The original groups are read in and stored in memory
so that after we compute our own bytecounts, we can compare them with those
on disk. A print function is provided to do this comparison and show the
results on the console.
A 'qgroup check' pass is added to btrfsck. If any subvolume quota groups
differ from what we compute, the differences for them are printed. We also
provide an option '--qgroup-report' which will run only the quota check code
and print a report on all quota groups. Other than making it possible to
verify that our qgroup changes work correctly, this mode can also be used in
xfstests for automated checking after qgroup tests.
This patch does not address the following:
- compressed counts are identical to non compressed, because kernel doesn't
make the distinction yet. Adding the code to verify compressed counts
shouldn't be hard at all though once kernel can do this.
- It is only concerned with subvolume quota groups (like most of
btrfs-progs).
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: David Sterba <dsterba@suse.cz>
Fix double free of memory if btrfs_open_devices fails:
*** Error in `btrfs': double free or corruption (fasttop): 0x000000000066e020 ***
Crash happened because when open failed on device inside
btrfs_open_devices it freed all memory by calling btrfs_close_devices but
inside disk-io.c we call btrfs_close_again it again.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When a disk containing btrfs is overwritten with other FS, ext4
for example it doesn't overwrite 2nd and 3rd copy of the btrfs SB.
And btrfs_read_dev_super() would look for backup SB when primary
SB isn't found. This causes the problem as in the reproducer below.
In kernel we avoid this by _not_ reading backup SB implicitly,
this patch would port the same to btrfs-progs.
reproducer:
mkfs.btrfs /dev/sde
mkfs.ext4 /dev/sde
mount /dev/sde /ext4
btrfs-convert /dev/sde (is successful (bug))
with this patch
::
btrfs-convert /dev/sde
/dev/sde is mounted
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we are cycling through all of the mirrors trying to find the best one we need
to make sure we set best_mirror to an actual mirror number and not 0. Otherwise
we could end up reading a mirror that wasn't the best and make everybody sad.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, as of 8cae1840af when running
btrfs-convert I get a bus error.
The problem is that struct btrfs_key has __attribute__ ((__packed__))
so it is not aligned. Then, a pointer to it's objectid field is taken,
cast to a void*, then eventually cast back to a u64* and
dereferenced. The problem is that the dereferenced u64* is not
necessarily aligned (ie, not necessarily a valid u64*), resulting in
undefined behavior.
This patch adds a local u64 variable which would of course be properly
aligned and then uses a pointer to that.
I did not modify the call from btrfs_fs_roots_compare_roots as that
uses struct btrfs_root which is a regular struct and would thus have
it's members correctly aligned to begin with.
After patching this I realized Liu Bo had already written a similar
patch, but I think mine is cleaner, so I'm sending it anyway.
Signed-off-by: Ivan Jager <aij+@mrph.org>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Lu Fengqi
Qu Wenruo
Omar Sandoval
David Sterba
Silvio Fricke
Zhao Lei
David Sterba
Josef Bacik
Dimitri John Ledkov
Anand Jain
Zach Brown
Filipe Manana
Wang Shilong
Eric Sandeen
Gui Hecheng
Mark Fasheh
Rakesh Pandit
Ivan Jager