Add close_ctree()s before the "returns" on errors after open_ctree()
Also merge the err returns into the "goto + single return" pattern.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Sometimes it is useful to see what btrfs restore is going to do
before provisioning enough external storage to restore onto.
Add a dry-run option so we can see what files and paths are found
by restore, without actually restoring any data.
Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The "ret" will be soon used to hold the return value of another function,
assign -1 to it before is nonsense.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The usage() in help.c calls exit(1), so the break behind is nonsense
and should be removed.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
To be consistent with the other cmds, replace the warning msg
with usage() when send/receive are used without any args.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The function call that set the ret parameter evaluated in this
BUG_ON was removed in a previous commit:
11be10f71e
Btrfs-progs: make fsck fix certain file extent inconsistencies
Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Fix a problem that does not use the result of realpath(), which caused
check_arg_type() can't handle mount point which ends with a final '/'.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Cc: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The return value in process_one_leaf could be over-written while
looping over the items in the leaf.
This patch will preserve a non-zero return value to the calling
function if a non-zero return value is encountered in the loop.
The return value of one (1) is consistent with non-zero values
that could be returned while processing the leaf.
The only caller of this function (walk_down_tree) would ignore
the return value anyway. But this patch will correct the
behaviour in case future changes intend to utilize the return
value.
Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Don't output normal messages into stderr, this make xfstests
filter output easier.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Move find_mount_root to utils.[ch] for general use.
Signed-off-by: Qu Wenruo <quwenruo@cn.fuijitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Change the definition of BUG() to use assert instead of abort to
provide information about the location of the issue.
Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
In btrfs/003 of xfstest, it will check whether btrfs fi show can find
missing devices.
But before the patch, btrfs-progs will not check whether device missing
if given a mounted btrfs mountpoint/block device.
This patch fixes the bug and will pass btrfs/003.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Cc: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
A BTRFS_IOC_CLONE_RANGE request with a src_length value of zero has the
effect of cloning all data from src_offset through to end-of-file.
Document this behaviour in the header file for those who (like me)
incorrectly assume that no data is cloned in such a case.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Commit "Btrfs-progs: make send/receive compatible with older kernels"
adds code that will become deprecated, let's clearly mark it in the
sources.
CC: Stefan Behrens <sbehrens@giantdisaster.de>
CC: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs filesystem show <not-found-label> should return non zero
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
A new test case when disk is unmounted and if the non mapper
disk path is given as the argument to the btrfs filesystem show <arg>
we still need this to work but lblkid will pull only mapper disks,
it won't match. So this will normalize the input to find btrfs
by fsid and pass it to the search.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
With this property, one can enable compression for individual files
without the need to mount the filesystem with the compress or
compress-force options, and specify the compression algorithm.
When applied against a directory, files created under that directory
will inherit the compression property.
This requires the corresponding kernel patch, which adds the support
for setting and getting properties and implements the compression
property.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
So that we can get the label of a mounted filesystem.
Before this change:
$ btrfs prop get /mnt/btrfs label
ERROR: object is not compatible with property
$ btrfs prop get /dev/sdb3 label
ERROR: dev /dev/sdb3 is mounted, use mount point
ERROR: failed to set/get property for object.
After this change:
$ btrfs prop get /mnt/btrfs label
label=foobar
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Several fixes:
1) The function check_is_root() returns 0 if the object is root;
2) Don't treat any error from get fsid ioctl as meaning the target
is root. Only -ENOTTY means it's a root (parent directory is
not a btrfs fs) and a -ENOTDIR means our target object is not a
directory, therefore it can be the root;
3) Fix the comparison of the target and target's parent fs ids. If
they are different, it means the target is a mount point in a
btrfs fs, therefore it's a root, otherwise it isn't.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
"btrfs filesystem property" is a generic interface to set/get
properties on filesystem objects (inodes/subvolumes/filesystems
/devs).
This patch adds the generic framework for properties and also
implements two properties. The first is the read-only property
for subvolumes and the second is the label property for devices.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Some users complaint that with latest btrfs-progs, they will
fail to use send/receive. The problem is new tool will try
to use uuid tree while it dosen't work on older kernel.
Now we first check if we support uuid tree, if not we fall into
normal search as previous way.i copy most of codes from Alexander
Block's previous codes and did some adjustments to make it work.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Steps to reproduce:
# mkfs.btrfs -f /dev/sda8
# mount /dev/sda8 /mnt
# btrfs sub create /mnt/a
# touch /mnt/b
# btrfs sub create /mnt/c
# btrfs sub delete /mnt/*
Above steps will trigger following abortion:
ERROR: 'b' is not a subvolume
*** Error in `btrfs': double free or corruption (out): 0x0000000002116060 ***
======= Backtrace: =========
/lib64/libc.so.6[0x3fa467cef8]
/lib64/libc.so.6(closedir+0xd)[0x3fa46b846d]
btrfs[0x43e608]
btrfs[0x40622f]
btrfs[0x403d19]
btrfs[0x4062c6]
btrfs[0x403f68]
We try to fix it by resetting @fd && @dirstream before trying next
subvolume deletion.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, as of 8cae1840af when running
btrfs-convert I get a bus error.
The problem is that struct btrfs_key has __attribute__ ((__packed__))
so it is not aligned. Then, a pointer to it's objectid field is taken,
cast to a void*, then eventually cast back to a u64* and
dereferenced. The problem is that the dereferenced u64* is not
necessarily aligned (ie, not necessarily a valid u64*), resulting in
undefined behavior.
This patch adds a local u64 variable which would of course be properly
aligned and then uses a pointer to that.
I did not modify the call from btrfs_fs_roots_compare_roots as that
uses struct btrfs_root which is a regular struct and would thus have
it's members correctly aligned to begin with.
After patching this I realized Liu Bo had already written a similar
patch, but I think mine is cleaner, so I'm sending it anyway.
Signed-off-by: Ivan Jager <aij+@mrph.org>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Remove the extraneous `to' from `Can't access to X'.
Signed-off-by: Mitchel Humpherys <mitch.special@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
this patch will make btrfsck operations to open disk in exclusive mode,
so that mount will fail when btrfsck is running
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The following steps could trigger btrfs segfault:
mkfs -t btrfs -m raid5 -d raid5 /dev/loop{0..3}
losetup -d /dev/loop2
btrfs check /dev/loop0
The reason is that read_tree_block() returns NULL and
add_root_to_pending() dereferences it without checking it first.
Also replace a BUG_ON with proper error checking.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
for now the manual sync up of new ioctls introduced in the btrfs
kernel. For which there wasn't any btrfs-progs patch.
however we might have better idea for the long run.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
This adds the flag to ctree.h, adds the feature option to mkfs to turn it on and
fixes fsck so it doesn't complain about missing hole extents in files when this
flag is set.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Skip non-regular files to avoid ioctl errors while defragmenting.
They are silently ignored in recursive mode but reported as errors when
used as command-line arguments.
Signed-off-by: Pascal VITOUX <vitoux.pascal@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Steps to reproduce:
# mkfs.btrfs -f /dev/sda8
# mount /dev/sda8 /mnt
# mkdir /mnt/subvolumes
# btrfs sub create /mnt/subvolumes/subv1
# btrfs sub create /mnt/subvolumes/subv1/subv1.1
# btrfs sub list -o /mnt/subvolumes/subv1 <----we did not list anything
The problem is that we don't set @top_id right, fix it.
Reported-by: Alex <alex@bpmit.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
add_seen_fsid() which was introduced lately will eliminate
the mounted disks, so we don't need test_skip_this_disk()
anymore
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
this patch will handle the strerror reporting of the error instead of
printing errno, and also replaced the BUG_ON with the error handling
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If we change our default subvolume, btrfs receive will fail to find
subvolume. To fix this problem, we have three ideas:
1.make btrfs snapshot ioctl support passing source subvolume's objectid.
2.when we want to using interval subvolume path, we mount it other place
that use subvolume 5 as its default subvolume.
3.tell the user to mount the toplevel subvol by himself and run
receive
We's better use the third approach because first patch will bother kernel
change and the second approach is not very good for power users. So give this
option to users.
Reported-by: Michael Welsh Duggan <mwd@md5i.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Originally, btrfstune will fail without any options, like this:
# btrfstune /dev/sdb
An error prompt & usage should show up upon this condition.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
- send accepts multiple subvolumes
- add missing option -e to man
- minor man formatting fix
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Subvolume deletion does not do a full transaction commit. This can lead
to an unexpected result when the system crashes between deletion and
commit, the subvolume directory will appear again. Add options to request
filesystem sync after each deleted subvolume or after the last one.
If the command with --commit option finishes succesfully, the
subvolume(s) deletion status is safely stored on the media.
Userspace approach is more flexible than in-kernel. Related discussions:
http://www.spinics.net/lists/linux-btrfs/msg22088.htmlhttp://www.spinics.net/lists/linux-btrfs/msg27240.html
CC: Alex Lyakas <alex.btrfs@zadarastorage.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
a clean up patch, the BTRFS_STRIPE_LEN is been duplicated across
btrfs-progs, the kernel defines it in volume.h so do the same
for progs.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
free(3) already checks the pointer for NULL, no need to do it
on your own. This patch make the change globally.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Make sure we are a block device firstly, this can avoid some
unnecessary ioctls operations.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
A user had a fs where the objectid of an orphan item was not the actual orphan
item objectid. This screwed up fsck because the block has keys in the wrong
order, also the fs scanning stuff will freak out because we have an inode with
nlink 0 and no orphan item. So this patch is pretty big but is all related.
1) Deal with bad key ordering. We can easily fix this up, so fix the checking
stuff to tell us exactly what it found when it said there was a problem. Then
if it's bad key ordering we can reorder the keys and restart the scan.
2) Deal with bad keys. If we find an orphan item with the wrong objectid it's
likely to screw with stuff, so keep track of these sort of things with a
bad_item list and just run through and delete any objects that don't make sense.
So far we just do this for orphan items but we could extend this as new stuff
pops up.
3) Deal with missing orphan items. This is easy, if we have a file with i_nlink
set to 0 and no orphan item we can just add an orphan item.
4) Add the infrastructure to corrupt actual key values. Needed this to create a
test image to verify I was fixing things properly.
This patch fixes the corrupt image I'm adding and passes the other make test
tests. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
When we re-init the extent root we make it completely empty, so when we reset a
pending balance we will fail to find refs for any blocks we may cow, which will
result in errors and we will exit out. We need to reset the balance first so
the normal cow stuff doesn't freak out and then we can re-init the extent tree.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Previously, open_file_or_dir() will open block device successfully, however,
we should enhance such checks to make sure we are really opening a file or dir.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The error msg:
"ERROR: defrag range ioctl not supported in this kernel,
please try without any options."
should only show up when failing to do a range defraging,
not upon non-range defraging.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
btrfstune operates on umounted devices <device>,
not mount points <mnt>. fix it.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
