the dev scan to find btrfs is performed at two locations
all most the same way one at filesystem show and another
at device scan. They both follow the same steps. This
patch does not alter anything except that it brings these
two same logic into the function scan_for_btrfs so that
we can play tweaking it.
the patch which recommends to use /dev/mapper
will also need it
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
btrfs_scan_for_fsid uses only one argument run_ioctl out of 3
so remove the rest two of them
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
valgrind complains open_file_or_dir() causes a memory leak.That is because
if we open a directoy by opendir(), and then we should call closedir()
to free memory.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
As implemented now, we use 1024 based units but reporting 1000 based,
let's finally fix that and add optional unit bases later.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Instead of aborting with a BUG_ON() statement, return a
negated errno code. Also updated mkfs and convert tools
to print a nicer error message when make_btrfs() returns
an error.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Assert that the writes of the device and chunk tree
roots succeed. This verification is currently done
for all other tree roots, however it was missing for
those 2 trees.
Would these tree root writes fail, but all others succeed,
it would lead to a corrupted/incomplete btrfs filesystem,
or, more likely some weird failure later on in mkfs.btrfs
inside open_ctree().
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We don't need callers to manage string storage for each pretty_sizes()
call. We can use a macro to have per-thread and per-call static storage
so that pretty_sizes() can be used as many times as needed in printf()
arguments without requiring a bunch of supporting variables.
This lets us have a natural interface at the cost of requiring __thread
and TLS from gcc and a small amount of static storage. This seems
better than the current code or doing something with illegible format
specifier macros.
Signed-off-by: Zach Brown <zab@redhat.com>
Acked-by: Wang Shilong <wangs.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Some codes still use the cpu_to_lexx instead of the
BTRFS_SETGET_STACK_FUNCS declared in ctree.h.
Also added some BTRFS_SETGET_STACK_FUNCS for btrfs_header and
btrfs_super.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
With commit
87c09f7 Btrfs-progs: fix memory leaks on cleanup
mkfs on multiple dev is ending with segfault at
close_all_devices() during kfree(device->name)
because mkfs calls btrfs_add_to_fsid, which does not initialize
name when dev is added to the list.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In the cases where one of the disk is not suitable for
btrfs, then we would fail the mkfs, however we determine
that after we have written btrfs to the preceding disks.
At this time if user changes mind for not to use btrfs
will left with no choice.
So this patch will check if all the provided disks are
suitable for the btrfs at once before proceeding to
create btrfs on a disk.
Further this patch also removed duplicate code to check
device suitability for the btrfs.
Next, there is an existing bug about the -r mkfs option,
which this patch would carry forward most of it.
Ref:
[PATCH 2/2, RFC] btrfs-progs: overhaul mkfs.btrfs -r option
Signed-off-by: Anand Jain <anand.jain@oracle.com>
to merg prev
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Previously btrfs-image would set a METADUMP flag and would make one big system
chunk to cover the entire file system in the super in order to get around the
unpleasant business of having to adjust the chunk tree. This meant that you
could use the progs stuff on a restored file system, which is great for testing
btrfsck and other such things. But we want to be able to run the tree log
replay on a file system that is not able to run the tree log replay. So in
order to do this we need to fixup the super's chunk array and the chunk tree
itself. This is pretty easy since we restore using the logical offsets of the
metadata, so we just have to set the chunk items to have 1 stripe and have the
stripes point at the primary device and then use the logical offset of the chunk
as the physical offset. With this patch I can restore a file system image that
had a tree log and mount the file system and have the log be replayed
successfully. This patch also gives you the -o option in case you want the old
restore way, in the case where we want to make sure the system chunks as they
were given to us are correct. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Of recently and intermittently I am seeing open fail
for /dev/btrfs-control (btrfs is loaded), and there are no
dmesg errors, this may not be a complete help in digging
this issue but something which is necessary.
Thanks
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
get_fs_info() has been silently switching from a device to a mounted
path as needed; the caller's filehandle was unexpectedly closed &
reopened outside the caller's scope. Not so great.
The callers do want "fdmnt" to be the filehandle for the mount point
in all cases, though - the various ioctls act on this (not on an fd
for the device). But switching it in the local scope of get_fs_info
is incorrect; it just so happens that *usually* the fd number is
unchanged.
So - use the new helpers to detect when an argument is a block
device, and open the the mounted path more obviously / explicitly
for ioctl use, storing the filehandle in fdmnt.
Then, in get_fs_info, ignore the fd completely, and use the path on
the argument to determine if the caller wanted to act on just that
device, or on all devices for the filesystem.
Affects those commands which are documented to accept either
a block device or a path:
* btrfs device stats
* btrfs replace start
* btrfs scrub start
* btrfs scrub status
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Add 3 new helpers:
* is_block_device(), to test if a path is a block device.
* get_btrfs_mount(), to get the mountpoint of a device,
if mounted.
* open_path_or_dev_mnt(path), to open either the pathname
or, if it's a mounted btrfs dev, the mountpoint. Useful
for some commands which can take either type of arg.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Allocate fs_info::super_copy dynamically of full BTRFS_SUPER_INFO_SIZE
and use it directly for saving superblock to disk.
This fixes incorrect superblock checksum after mkfs.
Signed-off-by: David Sterba <dsterba@suse.cz>
Clean btrfslabel.[c|h] out of the source tree and move those related
functions to utils.[c|h].
CC: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Refactor check_label().
- Make it be static at first, this is a preparation step since we'll remove
btrfslabel.[c|h] and move those functions from there to utils.[c|h], we can
do pre-checking against the input label string with it.
- Fix the label length check up from BTRFS_LABEL_SIZE to BTRFS_LABEL_SIZE - 1.
- Kill the check of label contains an invalid character, see below commits for detail:
79e0e445fc
btrfs-progs: kill check for /'s in labels.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
CC: David Sterba <dsterba@suse.cz>
CC: Gene Czarcinski <gene@czarc.net>
Currently, the following commands succeed.
# cat /proc/swaps
Filename Type Size Used Priority
/dev/sda3 partition 8388604 0 -1
/dev/sdc8 partition 9765884 0 -2
# mkfs.btrfs /dev/sdc8
WARNING! - Btrfs v0.20-rc1-165-g82ac345 IS EXPERIMENTAL
WARNING! - see http://btrfs.wiki.kernel.org before using
fs created label (null) on /dev/sdc8
nodesize 4096 leafsize 4096 sectorsize 4096 size 9.31GB
Btrfs v0.20-rc1-165-g82ac345
# btrfs fi sh /dev/sdc8
Label: none uuid: fc0bdbd0-7eed-460f-b4e9-131273b66df2
Total devices 1 FS bytes used 28.00KB
devid 1 size 9.31GB used 989.62MB path /dev/sdc8
Btrfs v0.20-rc1-165-g82ac345
#
But we should check out the swap device. Fixed it.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: David Sterba <dsterba@suse.cz>
print more informative error when we fail to open a device
If open() fails, we should let the user know why it failed.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Gene Czarcinski <gene@czarc.net>
In the places where we copy a string into the name
member of btrfs_ioctl_vol_args or btrfs_ioctl_vol_args_v2,
we use strncopy (to not overflow the name array) and then
set the last position to the null character.
Howver, in both cases the arrays are defined with:
char name[MAX+1];
hence the last array position is name[MAX].
In most cases, we now insert the null at name[MAX-1]
which deprives us of one useful character.
Even the above isn't consistent through the code, so
make some helper code to make it simple, i.e.
strncpy_null(dest, src) which automatically does the
right thing based on the size of dest.
Thanks to Zach Brown for the macro suggestion.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
btrfs_scan_one_dir() can overflow an arbitrarily small 256 byte buffer
with an arbitrarily slightly larger 1024 byte buffer as it remembers the
path of a dir to later descend.
Make these buffers the same size to stop the overflow and chose PATH_MAX
for that size so that it won't fail on legitimately bonkers paths.
Signed-off-by: Zach Brown <zab@redhat.com>
The super block magic is a le64 whose value looks like an unterminated
string in memory. The lack of null termination leads to clumsy use of
string functions and causes static analysis tools to warn that the
string will be unterminated.
So let's just treat it as the le64 that it is. Endian wrappers are used
on the constant so that they're compiled into run-time constants.
Signed-off-by: Zach Brown <zab@redhat.com>
Two convenient utility functions that have so far been local to scrub are
moved to utils.c.
They will be used in the device stats code in a following commit.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
The definition of the function open_file_or_dir() is moved from common.c
to utils.c in order to be able to share some common code between scrub
and the device stats in the following step. That common code uses
open_file_or_dir(). Since open_file_or_dir() makes use of the function
dirfd(3), the required XOPEN version was raised from 6 to 7.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Original-Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
The LOOP_GET_STATUS ioctl truncates filenames to 64 characters. We should get
the backing file for a given loop device from /sys/. This is how losetup does it
as well.
Signed-off-by: Nirbheek Chauhan <nirbheek.chauhan@collabora.co.uk>
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Tested-By: Hector Oron <hector.oron@collabora.co.uk>
Ignore the error ENXIO (device don't exists) and ENOMEDIUM (
No medium found -> like a cd tray empty) in the function
btrfs_scan_one_dir.
This avoids spurios errors due to an empty CD or a block device node
without a device (which is frequent in a static /dev).
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Add new suffixes in parse_size() function. New suffixes are: T as
terabyte, P as petabyte, E as exabyte. Note these units are
multiply of 2 .
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Replace the function atoll with strtoull(); Check that the suffix for the
parse_size() input is of only one character.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
My patch
04609add88
introduced a regression where if you mkfs'ed a group of disks with different
sizes it limited the disks to the size of the first one that is specified.
This was not the intent of my patch, I only want it to limit the size based
on the -b option, so I've reworked the code to pass in a max block count and
that fixes the issue. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
I had a test that creates a 7gig raid1 device but it was ending up wonky
because the second device that gets added is the full size of the disk
instead of the limited size. So enforce the limited size on all disks
passed in at mkfs time, otherwise our threshold calculations end up wonky
when doing chunk allocations. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
If we iterate the "goto again" loop, we've called "closedir(dirp)",
yet at the top of the loop, upon malloc failure we "goto fail",
where we test dirp and if non-NULL, call closedir(dirp) again.
* utils.c (btrfs_scan_one_dir): Clear "dirp" after closedir to avoid
use-after-free upon failed fullpath = malloc(...
Signed-off-by: Jim Meyering <meyering@redhat.com>
When we're using multipath or raid0, it is possible
that btrfs dev scan will find one of the component devices
instead of the proper virtual device the kernel creates.
We want to make sure the kernel scans the virtual devices last,
since it always remembers the last device it finds with a given fsid.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_scan_for_fsid is used by open_ctree and by mkfs when it is
checking for mounted devices. It currently scans all of /dev,
which is rarely the right answer.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
/proc/mounts contains device names that don't exist,
we end up erroring out because we're not able to stat
the device (that doesn't exist).
Fix this by allowing the mkfs when the target device doesn't exist.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
During the commands:
- btrfs filesystem show
- btrfs device scan
the devices "scanned" are extracted from /proc/partitions. This
should avoid to scan devices not suitable for a btrfs filesystem like cdrom
and floppy or to scan not existant devices.
The old behavior (scan all the block devices under /dev) may be
forced passing the "--all-devices" switch.
new version of check_mounted() returning more information gathered while
searching. check_mounted() is now a wrapper for check_mounted_where(). the
new version is needed by scrub.c
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Hugo Mills <hugo@carfax.org.uk>
we discovered speed setting is (probably unintentionally) initialized to 1 in make_btrfs(), while being initialized to 0 in btrfs_add_to_fsid(). initialization in make_btrfs() is due to reuse of buf after pwrite() without clearing it. consequently, code like
btrfs_set_extent_generation(buf, extent_item, 1);
writes to the same location in buf where speed will be placed, later. It may be a good idea to clear buf after each pwrite(), though leaving the struct btrfs_header intact.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Hugo Mills <hugo@carfax.org.uk>
This patch adds the setting of time to the root directory to the
mkfs.btrfs command.
As a result, the time of the mount point not correctly displayed
comes to be displayed correctly.
[before]
# mkfs.btrfs /dev/sdd10
# mount /dev/sdd10 /test1
# ls -ld /test1
dr-xr-xr-x 1 root root 0 Jan 1 1970 /test1
[after]
# date
Tue Nov 16 18:06:05 JST 2010
# mkfs.btrfs /dev/sdd10
# mount /dev/sdd10 /test1
# ls -ld /test1
dr-xr-xr-x 1 root root 0 Nov 16 18:06 /test1
Thanks,
Tsutomu
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Hugo Mills <hugo@carfax.org.uk>
Discard the whole device before starting to create the filesystem structures.
Modelled after similar support in mkfs.xfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Hi all,
this patch adds the command "btrfs filesystem label" to change (or show) the
label of a filesystem.
This patch is a subset of the one written previously by Morey Roof. I
included the user space part only. So it is possible only to change/show a
label of a *single device* and *unounted* filesystem.
The reason of excluding the kernel space part, is to simplify the patch in
order to speed the check and then the merging of the patch itself. In fact I
have to point out that in the past there was almost three attempts to propose
this patch, without success neither complaints.
Chris, let me know how you want to proceed. I know that you are very busy,
and you prefer to work to stabilize btrfs instead adding new feature. But I
think that changing a label is a *essential* feature for a filesystem
managing tool. Think about a mount by LABEL.
To show a label
$ btrfs filesystem label <device>
To set a label
$ btrfs filesystem label <device> <newlabel>
Please guys, give a look to the source.
Comments are welcome.
You can pull the source from the branch "label" of the repository
http://cassiopea.homelinux.net/git/btrfs-progs-unstable.git
Regards
G.Baroncelli
Signed-off-by: Chris Mason <chris.mason@oracle.com>
So alot of crazy people (I'm looking at you Meego) want to use btrfs on phones
and such with small devices. Unfortunately the way we split out metadata/data
chunks it makes space usage inefficient for volumes that are smaller than
1gigabyte. So add a -M option for mixing metadata+data, and default to this
mixed mode if the filesystem is less than or equal to 1 gigabyte. I've tested
this with xfstests on a 100mb filesystem and everything is a-ok.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch updates the super field to add the cache_generation member. It also
makes us set it to -1 on mkfs so any new filesystem will get the space cache
stuff turned on. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Hi Chris,
below is enclosed a trivial patch, which has the aim to improve the error
reporting of the "btrfs" command.
You can pull from
http://cassiopea.homelinux.net/git/btrfs-progs-unstable.git
branch
strerror
I changed every printf("some-error") to something like:
e = errno;
fprintf(stderr, "ERROR: .... - %s", strerror(e));
so:
1) all the error are reported to standard error
2) At the end of the message is printed the error as returned by the system.
The change is quite simple, I replaced every printf("some-error") to the line
above. I don't touched anything other.
I also integrated a missing "printf" on the basis of the Ben patch.
This patch leads the btrfs command to be more "user friendly" :-)
Regards
G.Baroncelli
btrfs-list.c | 40 ++++++++++++++++++++++--------
btrfs_cmds.c | 77 ++++++++++++++++++++++++++++++++++++++++-----------------
utils.c | 6 ++++
3 files changed, 89 insertions(+), 34 deletions(-)
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Check_mount() should also work with multi device filesystems.
This patch adds checks that allow to detect if a file is a device
file used by a mounted single or multi device btrfs or if it is a
regular file used by a loopback device that is part of a mounted
single or multi device btrfs.
The single device checks also work for non-btrfs filesystems.
This might be helpful to prevent users from running btrfs programs
(e.g. mkfs.btrfs) accidentally on a filesystem used somewhere else.
Signed-off-by: Andi Drebes <lists-receive@programmierforen.de>
This commit introduces a new kind of back reference for btrfs metadata.
Once a filesystem has been mounted with this commit, IT WILL NO LONGER
BE MOUNTABLE BY OLDER KERNELS.
The new back ref provides information about pointer's key, level and in which
tree the pointer lives. This information allow us to find the pointer by
searching the tree. The shortcoming of the new back ref is that it only works
for pointers in tree blocks referenced by their owner trees.
This is mostly a problem for snapshots, where resolving one of these fuzzy back
references would be O(number_of_snapshots) and quite slow. The solution used
here is to use the fuzzy back references in the common case where a given tree
block is only referenced by one root, and use the full back references when
multiple roots have a reference
The structure used to send device in btrfs ioctl calls was not
properly aligned, and so 32 bit ioctls would not work properly on
64 bit kernels.
We could fix this with compat ioctls, but we're just one byte away
and it doesn't make sense at this stage to carry about the compat ioctls
forever at this stage in the project.
This patch brings the ioctl arg up to an evenly aligned 4k.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
brfsctl -a will do nothing and no error is output
if btrfs.ko is not inserted.
Since no caller do error processing for btrfs_register_one_device,
make its return void and do error processing inside.
Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
This patch updates the ext3 to btrfs converter for the new
disk format. This mainly involves changing the convert's
data relocation and free space management code. This patch
also ports some functions from kernel module to btrfs-progs.
Thank you,
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
This patch updates btrfs-progs for superblock duplication.
Note: I didn't make this patch as complete as the one for
kernel since updating the converter requires changing the
code again. Thank you,
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Btrfs stores checksums for each data block. Until now, they have
been stored in the subvolume trees, indexed by the inode that is
referencing the data block. This means that when we read the inode,
we've probably read in at least some checksums as well.
But, this has a few problems:
* The checksums are indexed by logical offset in the file. When
compression is on, this means we have to do the expensive checksumming
on the uncompressed data. It would be faster if we could checksum
the compressed data instead.
* If we implement encryption, we'll be checksumming the plain text and
storing that on disk. This is significantly less secure.
* For either compression or encryption, we have to get the plain text
back before we can verify the checksum as correct. This makes the raid
layer balancing and extent moving much more expensive.
* It makes the front end caching code more complex, as we have touch
the subvolume and inodes as we cache extents.
* There is potentitally one copy of the checksum in each subvolume
referencing an extent.
The solution used here is to store the extent checksums in a dedicated
tree. This allows us to index the checksums by phyiscal extent
start and length. It means:
* The checksum is against the data stored on disk, after any compression
or encryption is done.
* The checksum is stored in a central location, and can be verified without
following back references, or reading inodes.
This makes compression significantly faster by reducing the amount of
data that needs to be checksummed. It will also allow much faster
raid management code in general.
The checksums are indexed by a key with a fixed objectid (a magic value
in ctree.h) and offset set to the starting byte of the extent. This
allows us to copy the checksum items into the fsync log tree directly (or
any other tree), without having to invent a second format for them.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This is the btrfs-progs version of the patch to add the ability to have
different csum algorithims. Note I didn't change the image maker since it
seemed a bit more complicated than just changing some stuff around so I will let
Yan take care of that.
Everything else was converted and for now a mkfs just
sets the type to be BTRFS_CSUM_TYPE_CRC32.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
This patch does the following:
1) Update device management code to match the kernel code.
2) Allocator fixes.
3) Add a program called btrfstune to set/clear the SEEDING
super block flags.
This patch adds transaction IDs to root tree pointers.
Transaction IDs in tree pointers are compared with the
generation numbers in block headers when reading root
blocks of trees. This can detect some types of IO errors.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
The offset field in struct btrfs_extent_ref records the position
inside file that file extent is referenced by. In the new back
reference system, tree leaves holding reference to file extent
are recorded explicitly. We can quickly scan these tree leaves, so the
offset field is not required.
This patch also makes the back reference system check the objectid
when extents are being deleted
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
This patch makes the back reference system to explicit record the
location of parent node for all types of extents. The location of
parent node is placed into the offset field of backref key. Every
time a tree block is balanced, the back references for the affected
lower level extents are updated.
Gcc only sends warnings for uninitialized variables when you compile with -O,
and there were a couple of bugs sprinkled in the code. The biggest was the
alloc_start variable for mkfs, which can cause strange things to happen.
(thanks to Gabor Micsko for helping to find this)
The main changes in this patch are adding chunk handing and data relocation
ability. In the last step of conversion, the converter relocates data in system
chunk and move chunk tree into system chunk. In the rollback process, the
converter remove chunk tree from system chunk and copy data back.
Regards
YZ
---
Block headers now store the chunk tree uuid
Chunk items records the device uuid for each stripes
Device extent items record better back refs to the chunk tree
Block groups record better back refs to the chunk tree
The chunk tree format has also changed. The objectid of BTRFS_CHUNK_ITEM_KEY
used to be the logical offset of the chunk. Now it is a chunk tree id,
with the logical offset being stored in the offset field of the key.
This allows a single chunk tree to record multiple logical address spaces,
upping the number of bytes indexed by a chunk tree from 2^64 to
2^128.
The mkfs code bootstraps the filesystem on a single device. Once
the raid block groups are setup, it needs to recow all of the blocks so
that each tree is properly allocated.
We get lots of warnings of the flavor:
utils.c:441: warning: format '%Lu' expects type 'long long unsigned int' but argument 2 has type 'u64'
And thanks to -Werror, the build fails. Clean up these printfs
by properly casting the arg to the format specified.
Signed-off-by: Alex Chiang <achiang@hp.com>
This saves from the blunder of formatting a live mounted filesystem.
This can be extended to get the mount flags of the filesystem
mounted.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@gmail.com>
Using strncpy avoids a 1 byte overflow into the next field
of the struct. The overflow is harmless, but does
trip automated tools.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
---
utils.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
This patch adds rollback support for the converter, the converter can
roll back a conversion if the image file haven't been modified. In
addition, I rearrange some codes in convert.c and add a few comments.
