We're using btrfs_item_nr_offset(leaf, 0) to get the start of the leaf
data in the kernel, we don't have btrfs_leaf_data. Replace all
occurrences of btrfs_leaf_data() with btrfs_item_nr_offset(leaf, 0) in
order to make syncing accessors.[ch] easier. ctree.c will be synced
later, so this is simply an intermediate step.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we sync the kernel we're going to pull in the fs.h dependency,
which defines BLOCK_SIZE/BLOCK_MASK. Avoid this conflict by renaming
the image definitions with the IMAGE_ prefix.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Print warning when one of the following is requested by some command
line option:
- btrfstune -b: conversion to block-group-tree
- mkfs.btrfs --num-global-roots: extent-tree-v2
- btrfs-image -d: dump image with data
Issue: #523
Signed-off-by: David Sterba <dsterba@suse.com>
There's a group of helpers to read device size, the btrfs_device_size
should be one of them. Rename it and so minor cleanup.
Signed-off-by: David Sterba <dsterba@suse.com>
The (unsigned long long) type casts can be dropped, printf understands
%llu and u64 and does not warn. In cases where the type is not u64 keep
the cast.
Signed-off-by: David Sterba <dsterba@suse.com>
The preferred order:
- system headers
- standard headers
- libraries
- kernel library
- kernel shared
- common headers
- other tools
- own headers
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Shinichiro reported that "mkfs.btrfs -m DUP" is doing repeated write
into the device.
For non-zoned device this is not a big deal, but for zoned device this
is critical, as zoned device doesn't support overwrite at all.
[CAUSE]
The problem is related to write_and_map_eb() call, since commit
2a93728391 ("btrfs-progs: use write_data_to_disk() to replace
write_extent_to_disk()"), we call write_data_to_disk() for metadata
write back.
But the problem is, write_data_to_disk() will call btrfs_map_block()
with rw = WRITE.
By that btrfs_map_block() will always return all stripes, while in
write_data_to_disk() we also iterate through each mirror of the range.
This results above repeated writeback.
[FIX]
Fix this problem by completely remove @mirror argument
from write_data_to_disk().
With extra comments to explicitly show that function will write to
all mirrors.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 2a93728391 ("btrfs-progs: use write_data_to_disk() to replace write_extent_to_disk()")
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function read_extent_from_disk() is only a wrapper to read tree
block.
And read_extent_data() is just a while loop to eliminate short read
caused by stripe boundary.
In fact, a lot of call sites of read_extent_data() are either reading
metadata (thus no possible short read) or doing extra loop by
themselves.
This patch will replace those two functions with read_data_from_disk(),
making it the only entrance for data/metadata read.
And update read_data_from_disk() to return the read bytes, so caller can
do a simple while loop.
For the few callers of read_extent_data(), open-code a small while loop
for them.
This will allow later RAID56 read repair using P/Q much easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we change the size of the btrfs_header we're going to need to
change how these helpers calculate where to find the start of items or
block ptrs. To prepare for that make these helpers take the
extent_buffer as an argument so we can do the appropriate math based on
the version type.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all callers are using the _nr variations we can simply rename
these helpers to btrfs_item_##member/btrfs_set_item_##member and change
the actual item SETGET funcs to raw_item_##member/set_raw_item_##member
and then change all callers to drop the _nr part.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This matches how the kernel does it, simply pass in the slot and fix up
btrfs_file_extent_inline_item_len to use the btrfs_item_nr() helper and
the correct define. Fixup all the callers to use the slot now instead
of passing in the btrfs_item.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a lot of the following patterns
item = btrfs_item_nr(nr);
btrfs_set_item_*(eb, item, val);
btrfs_set_item_*(eb, btrfs_item_nr(nr), val);
in a lot of places in our code. Instead add _nr variations of these
helpers and convert all of the users to this new helper.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this pattern in a lot of places
item = btrfs_item_nr(slot);
btrfs_item_size(leaf, item);
btrfs_item_offset(leaf, item);
when we could simply use
btrfs_item_size_nr(leaf, slot);
btrfs_item_offset_nr(leaf, slot);
Fix all callers of btrfs_item_size() and btrfs_item_offset() to use the
_nr variation of the helpers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we switch to multiple global trees we'll need to access the
appropriate extent root depending on the block group or possibly root.
To handle this, use a helper in most places and then the actual root in
places where it is required. We will whittle down the direct accessors
with future patches, but this does the bulk of the preparatory work.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extent tree v2 no longer tracks all allocated blocks on the file system,
so we'll have to default to walking trees to generate metadata images.
There's an annoying drawback with walking trees with btrfs-image where
we'll happily copy multiple blocks over and over again if there are
snapshots. Fix this by keeping track of blocks we've seen and simply
skipping blocks that we've already queued up for copying.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a lot of call sites where we use the following code snippet:
u8 super_block_data[BTRFS_SUPER_INFO_SIZE];
struct btrfs_super_block *sb;
u64 ret;
sb = (struct btrfs_super_block *)super_block_data;
The reason for this is, structure btrfs_super_block was smaller than
BTRFS_SUPER_INFO_SIZE.
Thus for anything with csum involved, we have to use a proper 4K buffer.
Since the recent unification of sizeof(struct btrfs_super_block), we no
longer need such workaround, and can use struct btrfs_super_block
directly to do any operation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When compiling btrfs-progs on 32bit x86 using GCC 11.1.0, there are
several warnings:
In file included from ./common/utils.h:30,
from check/main.c:36:
check/main.c: In function 'run_next_block':
./common/messages.h:42:31: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'u32' {aka 'unsigned int'} [-Wformat=]
42 | __btrfs_error((fmt), ##__VA_ARGS__); \
| ^~~~~
check/main.c:6496:33: note: in expansion of macro 'error'
6496 | error(
| ^~~~~
In file included from ./common/utils.h:30,
from kernel-shared/volumes.c:32:
kernel-shared/volumes.c: In function 'btrfs_check_chunk_valid':
./common/messages.h:42:31: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'u32' {aka 'unsigned int'} [-Wformat=]
42 | __btrfs_error((fmt), ##__VA_ARGS__); \
| ^~~~~
kernel-shared/volumes.c:2052:17: note: in expansion of macro 'error'
2052 | error("invalid chunk item size, have %u expect [%zu, %lu)",
| ^~~~~
image/main.c: In function 'search_for_chunk_blocks':
./common/messages.h:42:31: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Wformat=]
42 | __btrfs_error((fmt), ##__VA_ARGS__); \
| ^~~~~
image/main.c:2122:33: note: in expansion of macro 'error'
2122 | error(
| ^~~~~
There are two types of problems:
- __BTRFS_LEAF_DATA_SIZE()
This macro has no type definition, making it behaves differently on
different arches.
Fix this by following kernel to use inline function to make its return
value fixed to u32.
- size_t related output
For x86_64 %lu is OK but not for x86.
Fix this by using %zu.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a report that, btrfstune can even work while the fs has transid
mismatch problems.
$ btrfstune -f -u /dev/sdb1
Current fsid: b2b5ae8d-4c49-45f0-b42e-46fe7dcfcb07
New fsid: b2b5ae8d-4c49-45f0-b42e-46fe7dcfcb07
Set superblock flag CHANGING_FSID
Change fsid in extents
parent transid verify failed on 792854528 wanted 20103 found 20091
parent transid verify failed on 792854528 wanted 20103 found 20091
parent transid verify failed on 792854528 wanted 20103 found 20091
Ignoring transid failure
parent transid verify failed on 792870912 wanted 20103 found 20091
parent transid verify failed on 792870912 wanted 20103 found 20091
parent transid verify failed on 792870912 wanted 20103 found 20091
Ignoring transid failure
parent transid verify failed on 792887296 wanted 20103 found 20091
parent transid verify failed on 792887296 wanted 20103 found 20091
parent transid verify failed on 792887296 wanted 20103 found 20091
Ignoring transid failure
ERROR: child eb corrupted: parent bytenr=38010880 item=69 parent level=1 child level=1
ERROR: failed to change UUID of metadata: -5
ERROR: btrfstune failed
This leaves a corrupted fs even more corrupted, and due to the extra
CHANGING_FSID flag, btrfs check will not even try to run on it:
Opening filesystem to check...
ERROR: Filesystem UUID change in progress
ERROR: cannot open file system
[CAUSE]
Unlike kernel, btrfs-progs has a less strict check on transid mismatch.
In read_tree_block() we will fall back to use the tree block even its
transid mismatch if we can't find any better copy.
However not all commands in btrfs-progs needs this feature, only
btrfs-check (which may fix the problem) and btrfs-restore (it just tries
to ignore any problems) really utilize this feature.
[FIX]
Introduce a new open ctree flag, OPEN_CTREE_ALLOW_TRANSID_MISMATCH, to
be explicit about whether we really want to ignore transid error.
Currently only btrfs-check and btrfs-restore will utilize this new flag.
Also add btrfs-image to allow opening such fs with transid error.
Link: https://www.reddit.com/r/btrfs/comments/pivpqk/failure_during_btrfstune_u/
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a small device size misalignment between the super block device
size and the device extent size:
total_bytes 10737418240 <<<
bytes_used 15097856
dev_item.total_bytes 10737418240
dev_item.bytes_used 1094713344
item 0 key (DEV_ITEMS DEV_ITEM 1) itemoff 16185 itemsize 98
devid 1 total_bytes 1095761920 bytes_used 1094713344
^^^^^^^^^^
[CAUSE]
In fixup_device_size(), we only reset superblock device item size, which
will be overwritten in write_dev_supers() using btrfs_device::total_bytes.
And it doesn't touch btrfs_superblock::total_bytes either.
[FIX]
So fix the small mismatch by also resetting btrfs_device::total_bytes,
btrfs_device::bytes_used and btrfs_superblock::total_bytes.
Thankfully since commit 73dd4e3c87 ("btrfs-progs: image: Don't modify
the chunk and device tree if the source dump is single device") single
device dump won't have such problem, but it's still worth for
multi-device dump.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With recent change to enlarge max_pending_size to 256M for data dump,
the decompress code requires quite a lot of memory, up to 256M * 4.
The reason is we're using wrapped uncompress() function call, which
needs the buffer to be large enough to contain the decompressed data.
This patch will re-work the decompress work to use inflate() which can
resume it decompression so that we can use a much smaller buffer size.
Use 512K as buffer size.
Now the memory consumption for restore is reduced to
cluster data size + 512K * nr_running_threads
Instead of the original one:
cluster data size + 1G * nr_running_threads
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new experimental data dump feature will dump the whole image, not
only the existing tree blocks but also all its data extents(*).
This feature will rely on the new dump format (_DUmP_v1), as it needs
extra large extent size limit, and older btrfs-image dump can't handle
such large item/cluster size.
Since we're dumping all extents including data extents, for the restored
image there is no need to use any extra super block flags to inform
kernel.
Kernel should just treat the restored image as any ordinary btrfs.
This new feature will be hidden behind the experimental features, that's
to say, if --enable-experimental is not enabled, although we still have
the option, it will not do anything but output an error message.
*: The data extents will be dumped as is, that's to say, even for
preallocated extent, its (meaningless) data will be read out and
dumpped.
This behavior will cause extra space usage for the image, but we can
skip all the complex partially shared preallocated extent check.
Issue: #394
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The original dump format only contains a magic member to verify the
format, this means if we want to introduce new on-disk format or change
certain size limit, we can only introduce new magic as version.
Introduce the framework to allow multiple magic numbers to co-exist for
further extensions.
Introduce the following members for each dump version.
- max_pending_size
The threshold size of a cluster. It's not a hard limit but a soft
one. One cluster can go larger than max_pending_size for one item, but
next item would go to the next cluster.
- magic_cpu
The magic number in CPU byte order.
- extra_sb_flags
If the super block of this restore needs extra super block flags like
BTRFS_SUPER_FLAG_METADUMP_V2.
For incoming data dump feature, we don't need any extra super block
flags.
This change also implies that all image dumps will use the same magic
for all clusters. No mixing is allowed, as we will use the first cluster
to determine the dump version.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
If restoring dumped image to a new file, under most cases kernel will
reject it since version 5.11:
# mkfs.btrfs -f /dev/test/test
# btrfs-image /dev/test/test /tmp/dump
# btrfs-image -r /tmp/dump ~/test.img
# mount ~/test.img /mnt/btrfs
mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
# dmesg -t | tail -n 7
loop0: detected capacity change from 10592 to 0
BTRFS info (device loop0): disk space caching is enabled
BTRFS info (device loop0): has skinny extents
BTRFS info (device loop0): flagging fs with big metadata feature
BTRFS error (device loop0): device total_bytes should be at most 5423104 but found 10737418240
BTRFS error (device loop0): failed to read chunk tree: -22
BTRFS error (device loop0): open_ctree failed
[CAUSE]
When btrfs-image restores an image into a file, and the source image
contains only single device, then we don't need to modify the
chunk/device tree, as we can reuse the existing chunk/dev tree without
any problem.
This also means, for such restore, we also won't do any target file
enlarge. This behavior itself is fine, as at that time, kernel won't
check if the device is smaller than the device size recorded in device
tree.
But later kernel commit 3a160a933111 ("btrfs: drop never met disk total
bytes check in verify_one_dev_extent") introduces new check on device
size at mount time, rejecting any loop file which is smaller than the
original device size.
[FIX]
Do extra file enlarge for single device restore if the restored file is
smaller than the device size.
Reported-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Su Yue <l@damenly.su>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In restore_metadump(), we call stat() but never use the result. This
call site is left by some code refactoring, as the stat() call is now
moved into fixup_device_size(). We can safely remove the call.
Reviewed-by: Su Yue <l@damenly.su>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a group of functions that are related to opening filesystem in
various modes, this can be moved to a separate file.
Signed-off-by: David Sterba <dsterba@suse.com>
Extending open_ctree with more parameters would be difficult, we'll need
to add more so factor out the parameters to a structure for easier
extension.
Signed-off-by: David Sterba <dsterba@suse.com>
While trying to run down a corruption problem I needed to use
btrfs-image to generate known good states in between tests. At some
point this started failing with
either extent tree is corrupted or deprecated extent ref format
This is because the fs had an extent item that was large enough that it
no longer had inline extent references, they were all keyed extent
references. The check is bogus, we can have extent items that are >=
the extent item size, not just > than the extent item size. Fix the
check so that we can generate metadata dumps properly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although btrfs-image will dump log tree, we will modify the restored
image if it's not a multi-device restore.
In that case, since log tree blocks are not recorded in the extent tree,
extent allocator will try to re-use the tree blocks belonging to log
trees, this would lead to transid mismatch if btrfs-restore chooses to
do device/chunk fixup.
This patch will fix such problem by pinning down all the log trees
blocks before fixing up the device and chunk trees.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs-image -r doesn't always create exactly the same fs of the original
fs, this is because btrfs-image can create dump from multi-device, and
restore it to single device.
Thus we need some special modification to chunk and device tree. This
behavior is mostly to handle the old behavior where we always restore
the metadata into SINGLE profile no matter what.
However this is not needed if the source fs only has one device, in that
case, we can use all the metadata as is, no need to modify the fs at
all, resulting an exact copy of metadata.
This patch will do extra check when doing restore, to avoid modify the
restored fs if the source is also single device.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This commit organises block groups cache in
btrfs_fs_info::block_group_cache_tree. And any dirty block groups are
linked in transaction_handle::dirty_bgs.
To keep coherence of bisect, it does almost replace in place:
1. Replace the old btrfs group lookup functions with new functions
introduced in former commits.
2. set_extent_bits(..., BLOCK_GROUP_DIRYT) things are replaced by linking
the block group cache into trans::dirty_bgs. Checking and clearing bits
are transformed too.
3. set_extent_bits(..., bit | EXTENT_LOCKED) things are replaced by
new the btrfs_add_block_group_cache() which inserts caches into
btrfs_fs_info::block_group_cache_tree directly. Other operations are
converted to tree operations.
Signed-off-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are going to touch dirty_bgs in transaction directly, so every call
chain should pass @trans to the leaf functions.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We access btrfs_block_group_cache::item mostly for @used and @flags.
@flags is already a dedicated member in btrfs_block_group_cache, only
@used doesn't have a dedicated member.
This patch will remove btrfs_block_group_cache::item and add
btrfs_block_group_cache::used.
It's the btrfs-progs equivalent of the following kernel patches:
btrfs: move block_group_item::used to block group
btrfs: move block_group_item::flags to block group
btrfs: remove embedded block_group_cache::item
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before this patch, we were using a very inefficient way to search
chunks:
We iterate through all clusters to find the chunk root tree block first,
then re-iterate all clusters again to find every child tree block.
Each time we need to iterate all clusters just to find a chunk tree
block. This is obviously inefficient, especially when chunk tree gets
larger. So the original author leaves a comment on it:
/* If you have to ask you aren't worthy */
static int search_for_chunk_blocks()
This patch will change the behavior so that we will only iterate all
clusters once.
The idea behind the optimization is, since we have the superblock
restored first, we could use the CHUNK_ITEMs in
super_block::sys_chunk_array to build a SYSTEM chunk mapping.
Then, when we start to iterate through all items, we can easily skip
unrelated items at different level:
- At cluster level
If a cluster starts beyond last system chunk map, it must not contain
any chunk tree blocks (as chunk tree blocks only lives inside system
chunks)
- At item level
If one item has no intersection with any system chunk map, then it
must not contain any tree blocks.
By this, we can iterate through all clusters just once, and find out all
CHUNK_ITEMs.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new helper function, is_in_sys_chunks(), to determine if an
item is in the range of system chunks.
Since btrfs-image will merge adjacent same type extents into one item,
this function is designed to return true for any bytes in system chunk
range.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we are doing a pretty slow search for system chunks before
restoring real data.
The current behavior is to search all clusters for chunk tree root
first, then search all clusters again and again for every chunk tree
block.
This causes recursive calls and pretty slow start up, the only good news
is since chunk tree are normally small, we don't need to iterate too
many times, thus overall it's acceptable.
To address such bad behavior, we could take usage of system chunk array
in the super block.
By recording all system chunks ranges, we could easily determine if an
extent belongs to chunk tree, thus do one loop simple linear search for
chunk tree leaves.
This patch only introduces the code base for later patches.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need to allocate 2 * max_pending_size (which can be 256M) if
we're just extracting super block.
We only need to prepare BTRFS_SUPER_INFO_SIZE as buffer size.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can easily get confusing error message like:
ERROR: restore failed: Success
This is caused by wrong "%m" usage, as we normally use ret to indicate
error, without populating errno.
This patch will fix it by output the return value directly as normally
we have extra error message to show more meaning message than the return
value.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
