Nodesize is used in kernel, the values are always equal. We have to keep
leafsize in headers, similarly the tree setting functions still take and
set leafsize, but it's effectively a no-op.
Signed-off-by: David Sterba <dsterba@suse.com>
PAGE_CACHE_SIZE is hardcoded to 4K in cmds-restore.c. Correct
value should be sector size. Fix this through replacing
hardcoded 4K to sectorsize.
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add new btrfsck option, '--chunk-root', to specify chunk root bytenr.
And allow open_ctree_fs_info() function accept chunk_root_bytenr to
override the bytenr in superblock. This will be mainly used when chunk
tree corruption.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix a check of len versus PATH_MAX in function copy_symlink(), to
account for the terminating null byte.
Resolves-Coverity-CID: 1296749
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Symlink restore needs this, but the cut&paste became too complicated.
Simplify everything.
Signed-off-by: Dan Merillat <dan.merillat@gmail.com>
[message wording adjustments]
Signed-off-by: David Sterba <dsterba@suse.cz>
The logic around return value has changed in the metadata restore
patches. The return value from btrfs_search_slot may remain non-zero and
is returned. This is incorrectly interpreted as an error.
Signed-off-by: David Sterba <dsterba@suse.cz>
As long as the inode is intact, the file metadata can be restored.
Directory data is restored at the end of search_dir. Errors are
checked and returned, unless ignore_errors is requested.
Signed-off-by: Dan Merillat <dan.merillat@gmail.com>
[minor style fixes, error message updates]
Signed-off-by: David Sterba <dsterba@suse.cz>
We're not using it anywhere. The best practice is to add enums with
values > 255 for the long options, option index counting is error prone.
Signed-off-by: David Sterba <dsterba@suse.cz>
When runing restore under lzo compression, "bad compress length"
problems are encountered.
It is because there is a page alignment problem with the @decompress_lzo,
as follows:
|------| |----|-| |------|...|------|
page ^ page page
|
3 bytes left
When lzo pages are compressed in memory, we will ensure that the 4 bytes
length header will not cross a page boundary. There is a situation that
3 (or less) bytes are left at the end of a page, and then the 4 bytes
len is stored at the start of the next page. But the @decompress_lzo
doesn't go to the start of the next page and continue to read the next 4
bytes which crosses two pages, so a random value is fetched as a "bad
compress length".
So we check page alignment every time before we are going to fetch the
next @len and after the former piece of data is decompressed. If the
current page that we reach has less than 4 bytes left, then we should
fetch the next @len at the start of next page.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
[simplifed and moved into decompress_lzo]
Signed-off-by: David Sterba <dsterba@suse.cz>
Allow read_tree_block() and read_node_slot() to return error pointer.
This should help caller to get more specified error number.
For existing callers, change (!eb) judgmentt to
(!extent_buffer_uptodate(eb)) to keep the compatibility, and for caller
missing the check, use PTR_ERR(eb) if possible.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
- use standard PACKAGE_{NAME,VERSION,STRING,URL,...} autoconf macros
rather than homemade BTRFS_BUILD_VERSION
- don't #include version.h, now the file is necessary for library API only
Note that "btrfs version" returns "btrfs-progs <version>" instead of
the original confusing "btrfs <version>".
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
glibc 2.10+ (5+ years old) enables all the desired features:
_XOPEN_SOURCE 700, __XOPEN2K8, POSIX_C_SOURCE, DEFAULT_SOURCE; with a
single _GNU_SOURCE define in the makefile alone. For portability to
other libc implementations (e.g. dietlibc) _XOPEN_SOURCE=700 is also
defined.
This also resolves Debian bug report filed by Michael Tautschnig -
"Inconsistent use of _XOPEN_SOURCE results in conflicting
declarations". Whilst I was not able to reproduce the results, the
reported fact is that _XOPEN_SOURCE set to 500 in one set of files
(e.g. cmds-filesystem.c) generates/defines different struct stat from
other files (cmds-replace.c).
This patch thus cleans up all feature defines, and sets them at a
consistent level.
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747969
Signed-off-by: Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The value of variable leaf in while loop don't have to be set
for every round. Just move it outside.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
gcc 4.9.0 gives a warning: array subscript is above array bounds
Checking for "greater or equal" instead of just "equal" fixes this.
The warning is a false positive, appears with -ftree-vrp, but we'd
rather fix it to avoid noise during build.
http://www.mail-archive.com/linux-btrfs%40vger.kernel.org/msg34338.html
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: David Sterba <dsterba@suse.cz>
It's nice to ignore errors on restore, but spit out the filename so the user
knows which files of his aren't going to look right. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Before this patch, you could see the following after exec restore
# :too few arguments
The tool name "btrfs restore" is missing.
The @set_argv0() function is introduced by:
commit a184abc70f
btrfs-progs: move the check_argc_* functions into utils.c
...
Also add a new function "set_argv0" to set the correct tool name:
*btrfs-image*: too few arguments
But @set_argv0() only applies to the independent tools with
the name pattern btrfs-***.
Since restore is now is subcommand under "btrfs",
there is no need to use @set_argv0() before check_argc_* to
repair the prompt tool name before "too few arguments".
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When entering the next level node, the @next_leaf in restore forgets to
start at the first slot. Just reset it to the first one.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Steps to reproduce:
# mkfs.btrfs -f <dev>
# mount -o compress-force=lzo <dev> <mnt>
# for ((i=0;i<4000;i++)); do
echo -n 'A' >> <mnt>/inline_data
done
# umount <mnt>
# valgrind --tool=memcheck --leak-check=full \
btrfs restore <dev> <dest_dir>
output:
==32118== Invalid read of size 1
==32118== at 0x4A0A4E4: memcpy@@GLIBC_2.14
==32118== by 0x43DC91: read_extent_buffer
==32118== by 0x421401: search_dir (cmds-restore.c:240)
==32118== by 0x422CBB: cmd_restore (cmds-restore.c:1317)
==32118== by 0x404709: main (btrfs.c:248)
==32118== Address 0x4c4f4ac is not stack'd, malloc'd or...
It is because when deal with inline extent, the read_extent_buffer
is now reading a len of @ram_bytes which is the len of the uncompressed
data. But actually here we want the len of the inline item.
So in the compressed situation, use the len of the inline item.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
A memory problem reported by valgrind as follows:
=== Syscall param pwrite64(buf) points to uninitialised byte(s)
When running:
# valgrind --leak-check=yes btrfs restore /dev/sda9 /mnt/backup
Because the output buf size is alloced with malloc, but the length of
output data is shorter than the sizeof(buf), so valgrind report
uninitialised byte(s).
We could use calloc to repalce malloc and clear this WARNING away.
Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The restore tool should only print info of the restoring process
in verbose mode with -v option specified.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The three flags of @btrfs_path:
btrfs_path {
unsigned int keep_locks:1;
unsigned int skip_locking:1;
unsigned int leave_spinning:1;
}
have little meaning, because the userspace @btrfs_search_slot()
is free of locking and no other routines will decide their behavior
on these. So just remove them.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If you are using btrfs restore to try to recover a very large or
fragmented file, you may encounter _lots_ of prompts requiring
you to press 'y' to continue because we are looping a lot.
Add the option to press 'a', to supress these prompts for the rest
of the file.
Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Fix following build warnings on 32bit platform:
...
utils.c:1708:3: warning: left shift count >= width of
type [enabled by default]
if (x << i & (1UL << 63))
^
qgroup-verify.c:393:9: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
return (struct tree_block *)unode->aux;
^
qgroup-verify.c:407:38: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
if (ulist_add(tree_blocks, bytenr, (unsigned long long)block, 0) >= 0)
^
cmds-restore.c:120:4: warning: format %lu expects argument of type
long unsigned int, but argument 3 has type size_t [-Wformat=]
fprintf(stderr, "bad compress length %lu\n", in_len);
...
BTW, this patch also switches other castings with new helpers.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Since this patch:
btrfs-progs: move the check_argc_* functions into utils.c
All tools including the independent tools(e.g. btrfs-image, btrfs-convert)
can share the convenience of the check_argc_* functions, so this patch
adopt the argc check functions globally.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Add some missing options, also improve some confusing
expressions.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
These two options are used for same purpose, but they are exclusive with
each other. Make it clear to common users.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Previously if restore could not read users specified fs root, it would
output following message:
Error reading root
With this patch, it will output message like:
Fail to read root 1000: No such file or directory
Signed-off-byr Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Steps to reproduce:
# mkfs.btrfs -f /dev/sda9
# mount /dev/sda9 /mnt
# dd if=/dev/zero of=/mnt/data bs=1M count=1
# btrfs restore -r /dev/sda9 -r 2 -o /tmp
If users don't input a valid fs/file root objectid, btrfs restore still
continue and don't restore anything, this is unfriendly, we could
check it firstly.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When things go wrong for lzo-compressed btrfs, feeding lzo1x_decompress_safe()
with corrupt data during restore can lead to crashes. Reduce the risk by adding
a check on the input length.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
The following kernel commit changed the definition of the inline function
btrfs_file_extent_inline_len():
commit 514ac8ad8793a097c0c9d89202c642479d6dfa34
Author: Chris Mason <clm@fb.com>
Date: Fri Jan 3 21:07:00 2014 -0800
Btrfs: don't use ram_bytes for uncompressed inline items
If we truncate an uncompressed inline item, ram_bytes isn't updated to reflect
the new size. The fixe uses the size directly from the item header when
reading uncompressed inlines, and also fixes truncate to update the
size as it goes.
Not having this new definition implies that the restore tool might misbehave when
restoring files with an inline extent that got truncated on a kernel older than
release 3.14.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We need to read a number of bytes corresponding to the disk size of the file extent
item, and not to the number of bytes in the num_bytes field. Normally disk_size is
smaller than num_bytes (when using compression), except for files created with lzo
compression in a kernel older then the one which introduced the following change:
commit 59516f6017c589e7316418fda6128ba8f829a77f
Author: Stefan Agner <stefan@agner.ch>
Date: Mon Jul 1 20:33:39 2013 +0200
Btrfs: return -1 when lzo compression makes data bigger
With this fix the lzo code behaves like the zlib code by returning an
error
code when compression does not help reduce the size of the file.
This is currently not a bug since the compressed size is checked again
in
the calling method compress_file_range.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The `btrfs` and `mkfs.btrfs` binaries are not linked against libattr
so the correct header to include is <sys/xattr.h>.
This fixes the build when attr header files are not installed.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The code was incorrectly adding the file extent items' data offset to the logical
disk address of the extent (bytenr) when the extent is compressed. The offset is
relative to the uncompressed data and not to what we store on disk (compressed).
Also it attempted to copy ram_bytes to destination, which is incorrect when the
data offset field is non-zero, it must use num_bytes instead.
A test case for xfstests follows.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
switch to arg_strtou64 plus some cleanups to remove unnecessary
codes.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Sometimes it is useful to see what btrfs restore is going to do
before provisioning enough external storage to restore onto.
Add a dry-run option so we can see what files and paths are found
by restore, without actually restoring any data.
Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
