We can use btrfs_open_dir() to check whether target dir is
in btrfs's mount point before open, instead of checking it in
kernel space of ioctl, and return fuzzy error message.
Before patch:
# ./btrfs replace cancel /mnt/tmp1
ERROR: ioctl(DEV_REPLACE_CANCEL) failed on "/mnt/tmp1": Inappropriate ioctl for device
# ./btrfs replace status /mnt/tmp1
ERROR: ioctl(DEV_REPLACE_STATUS) failed on "/mnt/tmp1": Inappropriate ioctl for device
After patch:
# ./btrfs replace cancel /mnt/tmp1
ERROR: not a btrfs filesystem: /mnt/tmp1
# ./btrfs replace status /mnt/tmp1
ERROR: not a btrfs filesystem: /mnt/tmp1
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use btrfs_open_dir() in open_path_or_dev_mnt() to make the function
return error when target is neither block device nor btrfs mount point.
Also add "verbose" argument to let function output common error
message instead of putting duplicated lines in caller.
Before patch:
# ./btrfs device stats /mnt/tmp1
ERROR: getting dev info for devstats failed: Inappropriate ioctl for device
# ./btrfs replace start /dev/vdd /dev/vde /mnt/tmp1
ERROR: ioctl(DEV_REPLACE_STATUS) failed on "/mnt/tmp1": Inappropriate ioctl for device
After patch:
# ./btrfs device stats /mnt/tmp1
ERROR: not a btrfs filesystem: /mnt/tmp1
# ./btrfs replace start /dev/vdd /dev/vde /mnt/tmp1
ERROR: not a btrfs filesystem: /mnt/tmp1
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit "btrfs-progs: Add further checks to btrfs replace start command"
accesses device size just after its memory is freed.
Resolves-coverity-id: 1320425
Signed-off-by: David Sterba <dsterba@suse.com>
mkfs creates more than one fs_devices in fs_uuids.
1: one is for file system being created
2: others are created in test_dev_for_mkfs in order to check mount point
test_dev_for_mkfs()-> ... -> btrfs_scan_one_device()
Current code only closes 1, and this patch also closes in case 2.
Similar problem exist in other tools, eg.::
cmd-check.c: the function is:
cmd_check()->check_mounted()-> ... -> btrfs_scan_one_device()
...
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current code of print_replace_status() mixed stdout and stderr in error
case, output a error string to stderr without "\n", then output "\n" to
stdout to end the line.
This patch fixed above problem by using unified error handle way for 3
type of errors in print_replace_status().
Also include some small logic cleanup.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add further checks to btrfs replace start command.
The following tests where added in user space before calling
the ioctl():
1) check if the new disk is greather or equal to the old one
2) check if the source device is or a block device or a
numerical dev-id
These checks are already performed in kernel space; however
when "btrfs replace start" is ran in background is not possible
to show any error returned by the ioctl(), so in case of fail
the user had to check dmesg to understand the what happened.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: David Sterba <dsterba@suse.com>
The error string buffer passed as an argument is of a fixed size, though
we could print up to PATH_MAX + something bytes. Print the error message
directly.
Signed-off-by: David Sterba <dsterba@suse.cz>
Here the delete code as below, is trying to check if the provided device
is a block device, there is a function for it. Use it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
A new dev replace result was introduced by kernel commit
Btrfs: return failure if btrfs_dev_replace_finishing() failed
Make the userspace know about the new result too.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If BTRFS_IOC_DEV_REPLACE ioctl failed, args.result usually won't be
updated by the ioctl.
And the arg has been initialized with 0, the result is always 0, which
is BTRFS_IOCTL_DEV_REPLACE_RESULT_NO_ERROR, and the resulting error
message looks confusing:
ERROR: ioctl(DEV_REPLACE_START) failed on "/mnt/btrfs": No such file or directory, no error
But in case there's an internal result returned in future, don't drop
the result completely, instead print dev replace result message only
if the result is updated by a failed ioctl call.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Error out cmd_start_replace() if canonicalize_path() dstdev failed, add
the missing "goto leave_with_error;"
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This depends on the kernel patch:
[PATCH] btrfs:replace EINVAL with EOPNOTSUPP for dev_replace
This catches the EOPNOTSUPP and output msg that says dev_replace raid56
is not currently supported. Note that the msg will only be shown when
run dev_replace not in background.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
mount(8) will canonicalize pathnames before passing them to the kernel.
Links to e.g. /dev/sda will be resolved to /dev/sda. Links to /dev/dm-#
will be resolved using the name of the device mapper table to
/dev/mapper/<name>.
Btrfs will use whatever name the user passes to it, regardless of whether
it is canonical or not. That means that if a 'btrfs device ready' is
issued on any device node pointing to the original device, it will adopt
the new name instead of the name that was used during mount.
Mounting using /dev/sdb2 will result in df:
/dev/sdb2 209715200 39328 207577088 1% /mnt
lrwxrwxrwx 1 root root 4 Jun 4 13:36 /dev/whatever-i-like -> sdb2
/dev/whatever-i-like 209715200 39328 207577088 1% /mnt
Likewise, mounting with /dev/mapper/whatever and using /dev/dm-0 with a
btrfs device command results in df showing /dev/dm-0. This can happen with
multipath devices with friendly names enabled and doing something like
'partprobe' which (at least with our version) ends up issuing a 'change'
uevent on the sysfs node. That *always* uses the dm-# name, and we get
confused users.
This patch does the same canonicalization of the paths that mount does
so that we don't end up having inconsistent names reported by ->show_devices
later.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[use PATH_MAX in canonicalize_dm_name]
Signed-off-by: David Sterba <dsterba@suse.cz>
When 'btrfs replace status' encounters an unknown dev replace status, it
will cause an assert, which is somewhat overkilled and can be replaced
with a normal error message.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
open_path_or_dev_mnt() is used to on *mounted* btrfs device or mount
point, when a unmounted btrfs device is passed, errno is set to EINVAL to
info the caller.
If ignore the errno and just print "ERROR: can't access '%s'", end users
will get confused.
This patch will add check for open_path_or_dev_mnt() caller and print
more meaningful error message when a unmounted btrfs device path is
given.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Switch to new helper arg_strtou64(), also check if user assign
a valid super copy.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
this patch will handle the strerror reporting of the error instead of
printing errno, and also replaced the BUG_ON with the error handling
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
There are 3 kinds of return values in replace cancel:
0: cancel successfully.
1: usage or syntal errors
2: cancel a not started or finished replacing operations.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
These were mostly in option structs but there were a few gross string
pointer arguments given as 0.
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
test_dev_for_mkfs() is a common place where
we check if a device is fit for the btrfs use.
cmd_start_replace() should make use of test_dev_for_mkfs(),
and here the test_dev_for_mkfs() is further enhanced
to fit the cmd_start_replace() needs.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When the device disappear the path goes missing,
and that will be the one of the reason that user
will replace the device.
The devid of the missing btrfs device can be
obtained using the new cli option
btrfs fi show --kernel
And which can be used in the replace command.
---
btrfs replace start /dev/sdc /dev/sde /btrfs
Error: Unable to open device '/dev/sdc'
Try using the devid instead of the path
---
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Update the usage strings of some cmds to keep the them consistent with
the source.
Also some minor changes are done to fit the man page syntax.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
valgrind complains open_file_or_dir() causes a memory leak.That is because
if we open a directoy by opendir(), and then we should call closedir()
to free memory.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
get_fs_info() has been silently switching from a device to a mounted
path as needed; the caller's filehandle was unexpectedly closed &
reopened outside the caller's scope. Not so great.
The callers do want "fdmnt" to be the filehandle for the mount point
in all cases, though - the various ioctls act on this (not on an fd
for the device). But switching it in the local scope of get_fs_info
is incorrect; it just so happens that *usually* the fd number is
unchanged.
So - use the new helpers to detect when an argument is a block
device, and open the the mounted path more obviously / explicitly
for ioctl use, storing the filehandle in fdmnt.
Then, in get_fs_info, ignore the fd completely, and use the path on
the argument to determine if the caller wanted to act on just that
device, or on all devices for the filesystem.
Affects those commands which are documented to accept either
a block device or a path:
* btrfs device stats
* btrfs replace start
* btrfs scrub start
* btrfs scrub status
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
The two sigint handlers issue ioctls to clean up, but if
they fail, noone would know. I'm not sure there is
any other error handling to be done at this point, but a
notification seems wise.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
This is the user mode part of the device replace patch series.
The command group "btrfs replace" is added with three commands:
- btrfs replace start srcdev|srcdevid targetdev [-Bfr] mount_point
- btrfs replace status mount_point [-1]
- btrfs replace cancel mount_point
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
