The implicit devid is 1 but when it does not exist then the command
'btrfs fi resize max /path' fails and requires the user to specify the
number (and finding it elsewhere, e.g. in 'btrfs fi us -T' output).
This is a usability bug, we can verify if devid 1 exists and use the
lowest devid as a fallback. This does what user would expected, though
there's still a warning. Kernel has the hardcoded devid 1 when none is
specified, with this fix in user space the kernel does not need to be
changed (or could behave the same eventually).
Example use:
$ btrfs fi us -T .
Data Metadata System
Id Path single single single Unallocated Total Slack
-- ---------- --------- --------- -------- ----------- ------- -----
4 /dev/loop3 - - - 4.00GiB 4.00GiB -
-- ---------- --------- --------- -------- ----------- ------- -----
Total 416.00MiB 256.00MiB 64.00MiB 4.00GiB 4.00GiB 0.00B
Used 0.00B 128.00KiB 16.00KiB
$ btrfs fi resize max .
WARNING: no devid specified means devid 1 which does not exist, using
lowest devid 4 as a fallback
Resize device id 4 (/dev/loop3) from 4.00GiB to max
Issue: #470
Signed-off-by: David Sterba <dsterba@suse.com>
Add a convenience option to processing the range in smaller steps than
the whole file, where a flush is done after each steps. This could be
potentially used to measure progress with 'btrfs -vv fi defrag'.
Issue: #616
Signed-off-by: David Sterba <dsterba@suse.com>
Aligning with the kernel's struct btrfs_fs_devices:fs_list, rename
btrfs_fs_devices::list to btrfs_fs_devices::fs_list.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The struct open_ctree_flags currently holds arguments for
open_ctree_fs_info(), it can be confusing when mixed with a local variable
named open_ctree_flags as below in the function cmd_inspect_dump_tree().
cmd_inspect_dump_tree()
::
struct open_ctree_flags ocf = { 0 };
::
unsigned open_ctree_flags;
So rename struct open_ctree_flags to struct open_ctree_args.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to keep this file locally as we want to be uptodate with
upstream, so we can build btrfs-progs regardless of which kernel is
currently installed. Sync this with the upstream version and put it in
kernel-shared/uapi to maintain some semblance of where this file comes
from.
There are some changes that need to be synced back to kernel. A local
definition of static_assert is used to avoid compilation problems on gcc
(< 9) due to mandatory 2nd parameter.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Currently cli/009 test case failed with different exit number:
====== RUN CHECK /home/adam/btrfs-progs/btrfstune --help
usage: btrfstune [options] device
[...]
failed: /home/adam/btrfs-progs/btrfstune --help
test failed for case 009-btrfstune
[CAUSE]
In tune/main.c, we have the following call on usage():
static void print_usage(int ret)
{
usage(&tune_cmd);
exit(ret);
}
However usage() itself would always call exit(1):
void usage(const struct cmd_struct *cmd)
{
usage_command_usagestr(cmd->usagestr, NULL, 0, true, true);
exit(1);
}
This makes prevents any caller of usage() to modify its exit number.
[FIX]
Add a new argument @error for print_usage(), so we can properly return 0
for -h/--help usage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add option --uuid with same semantics that is provided by command
'mkswap'. By default a random UUID is generated, to not set any use
'btrfs filesystem mkswapfile -U clear swapfile'.
Issue: #581
Signed-off-by: David Sterba <dsterba@suse.com>
Per user report on https://old.reddit.com/r/btrfs/comments/107fnw1/btrfs_filesystem_mkswapfile_results_in_an/
the swapfile header does not contain the correct number of pages that
matches the file size and the activated swapfile is only 1GiB:
# btrfs filesystem mkswapfile -s 10g swapfile
# swapon swapfile
# cat /proc/swaps
Filename Type Size Used Priority
/swap/swapfile file 1048572 0 -2
A workaround is to run 'mkswap swapfile' before activation. Proper fix
is to calculate the number of (fixed size) 4K pages available for the
swap.
Issue: #568
Signed-off-by: David Sterba <dsterba@suse.com>
This patch copies in compression.h from the kernel. This is relatively
straightforward, we just have to drop the compression types definition
from ctree.h, and update the image to use BTRFS_NR_COMPRESS_TYPES
instead of BTRFS_COMPRESS_LAST, and add a few things to kerncompat.h to
make everything build smoothly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Defrag should not print the filenames by default, this got accidentally
changed in v6.0. Do a workaround that restores the original behaviour,
ie. no filenames and print them with -v, either as global or local
option. Proper fix is not to initialize with BTRFS_BCONF_UNSET and only
adjust the levels by -v/-q options.
Issue: #540
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 55438f3930.
The patch breaks resize cancel.
Reproducer:
#!/bin/bash
fallocate -l 7g /var/tmp/7g1 && fallocate -l 7g /var/tmp/7g2
thing1=$(sudo losetup --show -f /var/tmp/7g1)
thing2=$(sudo losetup --show -f /var/tmp/7g2)
echo Make the fs
mkfs.btrfs -L test539 $thing1
mkdir test539
mount -L test539 test539
echo Get rid of devid:1 by adding a new device and removing the original
btrfs dev add $thing2 test539
btrfs dev del $thing1 test539
echo Creating wiggleroom
fallocate -l 3g test539/3g1 && fallocate -l 3g test539/3g2
rm test539/3g1
echo Start a resize operation and wait 3s to run a cancel
echo Under 6.0 cancel, under 6.0.1 no cancel and runs out of space
btrfs fi re 2:-4g test539 &
sleep 3s && btrfs fi re cancel test539
wait
echo Cleanup
umount test539
losetup -d $thing1 && losetup -d $thing2
rm /var/tmp/7g{1,2}
rmdir test539
Issue: #539
Signed-off-by: David Sterba <dsterba@suse.com>
Add a command to create a new swapfile. The same can be achieved by
seandalone tools but they're just wrappers around the syscalls. The swap
format is simple enough to be created directly without mkswap command so
the swapfile can be created in one go.
The file must not exist before, this is to avoid problems with file
attributes or any other effects of existing extents. This also means the
command can't be used on block devices.
Default size is 2G, minimum size is 40KiB.
Signed-off-by: David Sterba <dsterba@suse.com>
check_resize_args() function checks user argument amount but does not
return the correct value in case it's not valid.
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace printing to stderr and stdout by the level-aware helper. No
change for commands that don't have the global -q/-v options, otherwise
the output can be quieted.
Signed-off-by: David Sterba <dsterba@suse.com>
The (unsigned long long) type casts can be dropped, printf understands
%llu and u64 and does not warn. In cases where the type is not u64 keep
the cast.
Signed-off-by: David Sterba <dsterba@suse.com>
Replace printf by the level-aware helper. No change for commands that
don't have the global -q/-v options, otherwise the output can be
quieted.
Signed-off-by: David Sterba <dsterba@suse.com>
All files include the <btrfsutil.h> which could be confused with the
system-wide installation. Drop the -I path from build and use full path
for any libbtrfsutil headers.
Signed-off-by: David Sterba <dsterba@suse.com>
The preferred order:
- system headers
- standard headers
- libraries
- kernel library
- kernel shared
- common headers
- other tools
- own headers
Signed-off-by: David Sterba <dsterba@suse.com>
Currently when a device is missing for a mounted filesystem the output
that is produced is unhelpful:
Label: none uuid: 139ef309-021f-4b98-a3a8-ce230a83b1e2
Total devices 2 FS bytes used 128.00KiB
devid 1 size 5.00GiB used 1.26GiB path /dev/loop0
*** Some devices missing
While the context which prints this is perfectly capable of showing
which device exactly is missing, like so:
Label: none uuid: 4a85a40b-9b79-4bde-8e52-c65a550a176b
Total devices 2 FS bytes used 128.00KiB
devid 1 size 5.00GiB used 1.26GiB path /dev/loop0
devid 2 size 0 used 0 path /dev/loop1 MISSING
This is a lot more usable output as it presents the user with the id
of the missing device and its path.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Running with ASAN we won't pass the self tests because we leak the whole
fs_info with btrfs filesystem show. Fix this by making sure we close
out the fs_info and clean up all of the memory and such.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I had to go back to find what BTRFS_ARG_REG is, add a comment for that.
And, search_umounted_fs_uuids() is also to find the seed device, so bring
the related comment above it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The refactoring f3a132fa1b ("btrfs-progs: factor out compression type
name parsing to common utils") caused a bug with parsing option -c with
defrag:
# btrfs fi defrag -v -czstd file
ERROR: unknown compression type: zstd
# btrfs fi defrag -v -clzo file
ERROR: unknown compression type: lzo
# btrfs fi defrag -v -czlib file
ERROR: unknown compression type: zlib
Fix it by properly checking the value representing unknown compression
algorithm.
Issue: #403
Signed-off-by: David Sterba <dsterba@suse.com>
There are various parsing helpers scattered everywhere, unify them to
one file and start with helpers already in utils.c.
Signed-off-by: David Sterba <dsterba@suse.com>
Recognize special resize amount 'cancel' for resize operation. This
will request kernel to stop running any resize operation (most likely
shrinking resize). This needs support in kernel, otherwise this will
fail due to another exclusive operation running (though could be the
same one).
The command returns after kernel finishes any work that got interrupted,
but this should not take long in kernels 5.10+ that allow interruptible
relocation. The waiting inside kernel is interruptible so this command
(and the waiting stage) can be interrupted.
The resize operation could relocate block groups but the nominal
filesystem size will be restored when resize won't finish. It's
recommended to review the filesystem state.
Note: in kernels 5.10+ sending a fatal signal (TERM, KILL, Ctrl-C) to
the process running the resize will cancel it too.
Example:
$ btrfs fi resize -10G /mnt
...
$ btrfs fi resize cancel /mnt
Signed-off-by: David Sterba <dsterba@suse.com>
Getting the per bg type zone unusable space will be used in other size
reports like 'fi us', so export it to the device utils.
Signed-off-by: David Sterba <dsterba@suse.com>
In the zoned mode there are parts of chunks that become unusable once
they get COWed and the zone must be reclaimed and reset to make the
space usable again. Provide a way to show the total size per block group
type in fi df:
$ btrfs fi df .
Data, single: total=1.00GiB, used=257.51MiB, zone_unusable=238.43MiB
System, single: total=256.00MiB, used=16.00KiB, zone_unusable=224.00KiB
Metadata, single: total=256.00MiB, used=816.00KiB, zone_unusable=8.61MiB
GlobalReserve, single: total=3.25MiB, used=0.00B
This will not be shown on non-zoned filesystems.
Signed-off-by: David Sterba <dsterba@suse.com>
There's a group of functions that are related to opening filesystem in
various modes, this can be moved to a separate file.
Signed-off-by: David Sterba <dsterba@suse.com>
Decrease dependency on system headers, remove where they're not needed
or became stale after code moved. The path-utils.h encapsulate path
operations so include linux/limits.h here, that's where PATH_MAX is
defined.
Signed-off-by: David Sterba <dsterba@suse.com>
Resize to nums without sign prefix makes false output:
$ btrfs fi resize 1:150g /srv/extra
Resize device id 1 (/dev/sdb1) from 298.09GiB to 0.00B
The resize operation would take effect though.
Fix it by handling the case if mod is 0 in check_resize_args().
Issue: #307
Reported-by: Chris Murphy <lists@colorremedies.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Su Yue <l@damenly.su>
Signed-off-by: David Sterba <dsterba@suse.com>
Extending open_ctree with more parameters would be difficult, we'll need
to add more so factor out the parameters to a structure for easier
extension.
Signed-off-by: David Sterba <dsterba@suse.com>
Make output of 'btrfs filesystem resize' command more readable and
describe the changes in more detail.
Before:
Resize '/mnt' of '1:-1G'
After:
Resize device id 1 (/dev/vdb) from 4.00GiB to 3.00GiB
Issue: #307
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_open_dir already has a check whether the passed path is a
directory and if so it returns a specific error code (-3) when such an
error occurs. Use this instead of open-coding the directory check. To
avoid regression in cli/003 test also move directory checks before fs
type in btrfs_open.
Output before this check:
ERROR: resize works on mounted filesystems and accepts only
directories as argument. Passing file containing a btrfs image
would resize the underlying filesystem instead of the image.
After:
ERROR: not a directory: /root/btrfs-progs/tests/test.img
ERROR: resize works on mounted filesystems and accepts only
directories as argument. Passing file containing a btrfs image
would resize the underlying filesystem instead of the image.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The libmount dependency has been added in commit 61ecaff036
("btrfs-progs: build: add libmount dependency"), and static build got
broken. There are functions that do basically the same thing and also
share the name, which in turn fails at link time.
ld: /../lib64/libmount.a(libcommon_la-canonicalize.o): in function `canonicalize_dm_name':
util-linux-2.34/lib/canonicalize.c:58: multiple definition of `canonicalize_dm_name';
common/path-utils.static.o:btrfs-progs/common/path-utils.c:286: first defined here
In case the collision can be resolved by renaming, it's done
(canonicalize_path and parse_size). There are 2 symbols from selinux
that are substituted by a weak aliases during the static build.
There's one new warning due to use of getgrnam_r in libmount that
depends on dynamic linking and may not work properly with static build.
We're not using the related functions directly or indirectly, so it
should be safe to ignore the warnings.
ld: ../lib64/libmount.a(la-utils.o): in function `mnt_get_gid':
util-linux-2.34/libmount/src/utils.c:625: warning: Using 'getgrnam_r' in statically linked applications
+requires at runtime the shared libraries from the glibc version used for linking
Issue: #333
Signed-off-by: David Sterba <dsterba@suse.com>
The exclusive ops will not start if there's one already running. Now
that we have the sysfs export (since kernel 5.10) to check if there's
one already running, use it to allow enqueueing of the operations as a
convenience.
Supported enqueuing:
btrfs balance start --enqueue
btrfs filesystem resize --enqueue
btrfs device add --enqueue
btrfs device delete --enqueue
btrfs replace start --enqueue
This patch implements the functionality based on Goldwyn's patch
https://lore.kernel.org/linux-btrfs/?q=20200825150338.32610-4-rgoldwyn%40suse.de
but on top of previous preparatory patches.
Note that 'filesystem resize' options could confuse getopt as the
negative size change looks like a series of short options and there's no
way to make getopt ignore the short options, so there's a custom option
parser.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
If the exclusive operation is available in sysfs file, check if there's
one already running. The check is done for:
- device add, remove, replace
- balance
- filesystem resize
All commands will validate arguments and check before the ioctl or
before any potentially irreversible operations (like clearing device
before replacing).
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Many subcommands have their own verbosity options that are being
superseded by the global options. Update the help text to reflect that
where applicable.
Signed-off-by: David Sterba <dsterba@suse.com>
