Currently, `btrfs device stats` returns non-zero only when there was an
error getting the counter values. This is fine for when it gets run by a
user directly, but is a serious pain when trying to use it in a script or
for monitoring since you need to parse the (not at all machine friendly)
output to check the counter values.
This patch adds an option ('-s') which causes `btrfs device stats`
to set bit 6 in the return code if any of the counters are non-zero.
This greatly simplifies checking from a script or monitoring software if
any errors have been recorded. In the event that this switch is passed
and an error occurs reading the stats, the return code will have bit
0 set (so if there are errors reading counters, and the counters which
were read were non-zero, the return value will be 65).
Signed-off-by: Austin S. Hemmelgarn <ahferroin7@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It seems like bad idea to use a library name (lblkid) within generic
function name. The currently used scanning library is implementation
detail and this detail should be hidden for rest of the code.
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The message about discard is printed unconditionally and does not
conform to the --quite option eg. in mkfs. Consolidate the operation
flags into one argument and add support for verbosity.
Signed-off-by: David Sterba <dsterba@suse.com>
* actual result
=======================================
# ./btrfs device ready /dev/sdb foo
#
=======================================
* expecting result
=======================================
# ./btrfs device ready /dev/sdb foo
btrfs device ready: too many arguments
usage: btrfs device ready <device>
Check device to see if it has all of its devices in cache for mounting
#
=======================================
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Print e.g. "[devid:4].write_io_errs 6" instead of
"[(null)].write_io_errs 6" when device is missing.
Signed-off-by: Patrik Lundquist <patrik.lundquist@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch introduces new option <devid> for the command
btrfs device delete <device_path|devid>[..] <mnt>
In a user reported issue on a 3-disk-RAID1, one disk failed with its
SB unreadable. Now with this patch user will have a choice to delete
the device using devid.
The other method we could do, is to match the input device_path
to the available device_paths with in the kernel. But that won't
work in all the cases, like what if user provided mapper path
when the path within the kernel is a non-mapper path.
This patch depends on the below kernel patch for the new feature to work,
however it will fail-back to the old interface for the kernel without the
patch
Btrfs: Introduce device delete by devid
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the following bug.
================================
# btrfs device scan -- /dev/sdb
ERROR: not a block device: --
================================
It should work as follow.
================================
# ./btrfs device scan -- /dev/sdb
Scanning for Btrfs filesystems in '/dev/sdb'
================================
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When 'btrfs device scan' command is invoked, it scans all devices,
check them for btrfs superblock and add devices with btrfs to a list.
Next, each device from the list is passed to kernel where it is handled
in the btrfs_scan_one_device() function. This function can, for example,
return -EBUSY when device contains superblock matched to existing and
mounted filesystem (if this device was pulled out from RAID and
connected again after some time).
btrfs tool stops device scan if any device has been failed to add, so
other existing devices with (possibly) valid FS will never be reached.
Fix this by remove stopping at any failure in the btrfs_register_all_devices(),
just return error count. btrfs_scan_one_device() reports any kind of
error already.
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
[ initialize err to 0 ]
Signed-off-by: David Sterba <dsterba@suse.com>
Commands that do not take any options do not use getopt, which means the
standard option separator "--" does not work. Update all command
handlers that need it, argv needs to be referenced using the optind that
is correctly pointed after the separator.
Signed-off-by: David Sterba <dsterba@suse.com>
Handle only negative values returned by ioctl syscalls, with exception
of the device remove. It returns positive values that are handled later.
Signed-off-by: David Sterba <dsterba@suse.com>
1: Remove more_than_one variable, use iterators value instead
2: Remove "out" label, we use break instead.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
[ changelog update ]
Signed-off-by: David Sterba <dsterba@suse.com>
Switch to common warning()/error() for cmds-device.c.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
[ minor tweaks ]
Signed-off-by: David Sterba <dsterba@suse.com>
Device deletion procedures ensures the device is a block device.
This patch introduces 'missing' as keyword again, correctly
passing it on to the kernel instead of complaining about
'missing' not being a block device.
Signed-off-by: Alexander Fougner <fougner89@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have btrfs_close_all_devices() in btrfs's main entrance,
it is not necessary to call btrfs_close_all_devices() separately
in each sub-command.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When creating small Btrfs filesystem instances (i.e. filesystem size <= 1GiB),
mkfs.btrfs fails if both sectorsize and nodesize are specified on the command
line and sectorsize != nodesize, since mixed block groups involves both data
and metadata blocks sharing the same block group. This is an incorrect behavior
when '-M' option isn't specified on the command line.
This commit makes optional the creation of mixed block groups i.e. Mixed block
groups are created only when -M option is specified on the command line.
Since we now allow small filesystem instances with sectorsize != nodesize to
be created, we can end up in the following situation,
[root@localhost ~]# mkfs.btrfs -f -n 65536 /dev/loop0
btrfs-progs v3.19-rc2-405-g976307c
See http://btrfs.wiki.kernel.org for more information.
Performing full device TRIM (512.00MiB) ...
Label: (null)
UUID: 49fab72e-0c8b-466b-a3ca-d1bfe56475f0
Node size: 65536
Sector size: 4096
Filesystem size: 512.00MiB
Block group profiles:
Data: single 8.00MiB
Metadata: DUP 40.00MiB
System: DUP 12.00MiB
SSD detected: no
Incompat features: extref, skinny-metadata
Number of devices: 1
Devices:
ID SIZE PATH
1 512.00MiB /dev/loop0
[root@localhost ~]# mount /dev/loop0 /mnt/
mount: mount /dev/loop0 on /mnt failed: No space left on device
The ENOSPC occurs during the creation of the UUID tree. This is because of
things like large metadata block size, DUP mode used for metadata and global
reservation consuming space. Also, large nodesize does not make sense on small
filesystems, hence this should not be an issue.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is needed by the patch which introduces new devid option for the
btrfs device delete.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use btrfs_open_dir() in open_path_or_dev_mnt() to make the function
return error when target is neither block device nor btrfs mount point.
Also add "verbose" argument to let function output common error
message instead of putting duplicated lines in caller.
Before patch:
# ./btrfs device stats /mnt/tmp1
ERROR: getting dev info for devstats failed: Inappropriate ioctl for device
# ./btrfs replace start /dev/vdd /dev/vde /mnt/tmp1
ERROR: ioctl(DEV_REPLACE_STATUS) failed on "/mnt/tmp1": Inappropriate ioctl for device
After patch:
# ./btrfs device stats /mnt/tmp1
ERROR: not a btrfs filesystem: /mnt/tmp1
# ./btrfs replace start /dev/vdd /dev/vde /mnt/tmp1
ERROR: not a btrfs filesystem: /mnt/tmp1
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
it was highlighted to me is_block_device(), returns
1 if the file is a block device,
< 0 in case of an error (eg: file not found)
0 otherwise
This patch makes proper return checks at all the places
where is_block_device() is used. Thanks to Goffredo.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Suggested-by: Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: David Sterba <dsterba@suse.com>
Move to use get_unit_mode_from_arg() for cmds-device.c,
to make "btrfs device usage"'s unit argument same with other
tools.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can use btrfs_open_dir() to check whether the target dir is
under btrfs mount point before openning, instead of checking it in kernel
through ioctl, and returning a fuzzy error message.
Before patch:
# (/mnt/tmp is not btrfs mountpoint)
#
# btrfs device add -f /dev/sda13 /mnt/tmp
ERROR: error adding the device '/dev/sda13' - Inappropriate ioctl for device
#
After patch:
# btrfs device add -f /dev/sda13 /mnt/tmp
ERROR: not btrfs filesystem: /mnt/tmp
#
Similar fix for device remove and device usage.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
[renamed to btrfs_open_dir]
Signed-off-by: David Sterba <dsterba@suse.com>
mkfs creates more than one fs_devices in fs_uuids.
1: one is for file system being created
2: others are created in test_dev_for_mkfs in order to check mount point
test_dev_for_mkfs()-> ... -> btrfs_scan_one_device()
Current code only closes 1, and this patch also closes in case 2.
Similar problem exist in other tools, eg.::
cmd-check.c: the function is:
cmd_check()->check_mounted()-> ... -> btrfs_scan_one_device()
...
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's an awkward asymmetry between btrfs device add and btrfs device
delete. Resolve this by aliasing delete to remove.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
At some places we do not clear the whole ioctl structure and could
pass garbage to kernel. Zero the ioctl vol_args and use a helper for
copying the path.
Signed-off-by: David Sterba <dsterba@suse.cz>
The error string buffer passed as an argument is of a fixed size, though
we could print up to PATH_MAX + something bytes. Print the error message
directly.
Signed-off-by: David Sterba <dsterba@suse.cz>
It's res instead of ret, wrong error message could be prointed in case
of error.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
my troubleshooting experience says have unique error string per module.
In the below eg, its one additional step to know error line,
cat -n cmds-device.c | egrep "error removing the device"
185 "ERROR: error removing the device '%s' - %s\n",
190 "ERROR: error removing the device '%s' - %s\n",
which is completely avoidable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[merged the two messages into one]
Signed-off-by: David Sterba <dsterba@suse.cz>
We're not using it anywhere. The best practice is to add enums with
values > 255 for the long options, option index counting is error prone.
Signed-off-by: David Sterba <dsterba@suse.cz>
David Sterba
Austin S. Hemmelgarn
Karel Zak
Satoru Takeuchi
Patrik Lundquist
Anand Jain
Yauhen Kharuzhy
Zhao Lei
Alexander Fougner
Chandan Rajendra
Omar Sandoval
David Sterba