Commit Graph

28 Commits

Author SHA1 Message Date
Anand Jain
4b3c9136be btrfs-progs: mkfs should first check all disks before writing to a disk
In the cases where one of the disk is not suitable for
btrfs, then we would fail the mkfs, however we determine
that after we have written btrfs to the preceding disks.
At this time if user changes mind for not to use btrfs
will left with no choice.

So this patch will check if all the provided disks are
suitable for the btrfs at once before proceeding to
create btrfs on a disk.

Further this patch also removed duplicate code to check
device suitability for the btrfs.

Next, there is an existing bug about the -r mkfs option,
which this patch would carry forward most of it.
Ref:
[PATCH 2/2, RFC] btrfs-progs: overhaul mkfs.btrfs -r option

Signed-off-by: Anand Jain <anand.jain@oracle.com>

to merg prev

Signed-off-by: Anand Jain <anand.jain@oracle.com>
2013-04-23 18:56:20 +02:00
Josef Bacik
d6f7e3da0d Btrfs-progs: make btrfs-image restore with a valid chunk tree V2
Previously btrfs-image would set a METADUMP flag and would make one big system
chunk to cover the entire file system in the super in order to get around the
unpleasant business of having to adjust the chunk tree.  This meant that you
could use the progs stuff on a restored file system, which is great for testing
btrfsck and other such things.  But we want to be able to run the tree log
replay on a file system that is not able to run the tree log replay.  So in
order to do this we need to fixup the super's chunk array and the chunk tree
itself.  This is pretty easy since we restore using the logical offsets of the
metadata, so we just have to set the chunk items to have 1 stripe and have the
stripes point at the primary device and then use the logical offset of the chunk
as the physical offset.  With this patch I can restore a file system image that
had a tree log and mount the file system and have the log be replayed
successfully.  This patch also gives you the -o option in case you want the old
restore way, in the case where we want to make sure the system chunks as they
were given to us are correct.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-09 18:43:24 +02:00
Eric Sandeen
7a355379ea btrfs-progs: rework get_fs_info to remove side effects
get_fs_info() has been silently switching from a device to a mounted
path as needed; the caller's filehandle was unexpectedly closed &
reopened outside the caller's scope.  Not so great.

The callers do want "fdmnt" to be the filehandle for the mount point
in all cases, though - the various ioctls act on this (not on an fd
for the device).  But switching it in the local scope of get_fs_info
is incorrect; it just so happens that *usually* the fd number is
unchanged.

So - use the new helpers to detect when an argument is a block
device, and open the the mounted path more obviously / explicitly
for ioctl use, storing the filehandle in fdmnt.

Then, in get_fs_info, ignore the fd completely, and use the path on
the argument to determine if the caller wanted to act on just that
device, or on all devices for the filesystem.

Affects those commands which are documented to accept either
a block device or a path:

* btrfs device stats
* btrfs replace start
* btrfs scrub start
* btrfs scrub status

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2013-03-12 17:07:40 +01:00
Eric Sandeen
10e00b0764 btrfs-progs: three new device/path helpers
Add 3 new helpers:

* is_block_device(), to test if a path is a block device.
* get_btrfs_mount(), to get the mountpoint of a device,
  if mounted.
* open_path_or_dev_mnt(path), to open either the pathname
  or, if it's a mounted btrfs dev, the mountpoint.  Useful
  for some commands which can take either type of arg.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2013-03-12 16:44:40 +01:00
Jeff Liu
efbbbc88cb btrfs-progs: move btrfslabel.[c|h] stuff to utils.[c|h]
Clean btrfslabel.[c|h] out of the source tree and move those related
functions to utils.[c|h].

CC: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
2013-02-26 19:27:22 +01:00
Jeff Liu
63a44771a4 btrfs-progs: refactor check_label()
Refactor check_label().

- Make it be static at first, this is a preparation step since we'll remove
btrfslabel.[c|h] and move those functions from there to utils.[c|h], we can
do pre-checking against the input label string with it.
- Fix the label length check up from BTRFS_LABEL_SIZE to BTRFS_LABEL_SIZE - 1.
- Kill the check of label contains an invalid character, see below commits for detail:
  79e0e445fc
  btrfs-progs: kill check for /'s in labels.

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
CC: David Sterba <dsterba@suse.cz>
CC: Gene Czarcinski <gene@czarc.net>
2013-02-26 19:24:14 +01:00
Tsutomu Itoh
d065d63057 Btrfs-progs: check out if the swap device
Currently, the following commands succeed.

 # cat /proc/swaps
 Filename                                Type            Size    Used    Priority
 /dev/sda3                               partition       8388604 0       -1
 /dev/sdc8                               partition       9765884 0       -2
 # mkfs.btrfs /dev/sdc8

 WARNING! - Btrfs v0.20-rc1-165-g82ac345 IS EXPERIMENTAL
 WARNING! - see http://btrfs.wiki.kernel.org before using

 fs created label (null) on /dev/sdc8
         nodesize 4096 leafsize 4096 sectorsize 4096 size 9.31GB
 Btrfs v0.20-rc1-165-g82ac345
 # btrfs fi sh /dev/sdc8
 Label: none  uuid: fc0bdbd0-7eed-460f-b4e9-131273b66df2
         Total devices 1 FS bytes used 28.00KB
         devid    1 size 9.31GB used 989.62MB path /dev/sdc8

 Btrfs v0.20-rc1-165-g82ac345
 #

But we should check out the swap device. Fixed it.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: David Sterba <dsterba@suse.cz>
2013-02-19 11:15:30 +01:00
Eric Sandeen
bcb2b73358 btrfs-progs: simplify ioctl name copy and null termination
In the places where we copy a string into the name
member of btrfs_ioctl_vol_args or btrfs_ioctl_vol_args_v2,
we use strncopy (to not overflow the name array) and then
set the last position to the null character.

Howver, in both cases the arrays are defined with:

        char name[MAX+1];

hence the last array position is name[MAX].

In most cases, we now insert the null at name[MAX-1]
which deprives us of one useful character.

Even the above isn't consistent through the code, so
make some helper code to make it simple, i.e.
strncpy_null(dest, src) which automatically does the
right thing based on the size of dest.

Thanks to Zach Brown for the macro suggestion.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2013-02-05 16:09:41 -08:00
Stefan Behrens
7a69dc4eec Btrfs-progs: make two utility functions globally available
Two convenient utility functions that have so far been local to scrub are
moved to utils.c.
They will be used in the device stats code in a following commit.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2013-01-30 00:40:35 +01:00
Anand Jain
46e3b8087b Btrfs-progs: move open_file_or_dir() to utils.c
The definition of the function open_file_or_dir() is moved from common.c
to utils.c in order to be able to share some common code between scrub
and the device stats in the following step. That common code uses
open_file_or_dir(). Since open_file_or_dir() makes use of the function
dirfd(3), the required XOPEN version was raised from 6 to 7.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Original-Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2013-01-30 00:40:35 +01:00
Goffredo Baroncelli
8f76aee6bc Move parse_size() to utils.[hc]
Move the function from cmds-filesystem.c and mkfs.c to utils.c

Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
2013-01-17 18:27:54 +01:00
Josef Bacik
605e806166 Btrfs-progs: only enforce a maximum size if we specify one
My patch

04609add88

introduced a regression where if you mkfs'ed a group of disks with different
sizes it limited the disks to the size of the first one that is specified.
This was not the intent of my patch, I only want it to limit the size based
on the -b option, so I've reworked the code to pass in a max block count and
that fixes the issue.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2012-10-02 13:02:48 +02:00
David Sterba
8935d84361 btrfs-progs: mkfs: add option to skip trim
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-07-06 10:11:10 -04:00
Goffredo Baroncelli
0dbd99fb3e Scan the devices listed in /proc/partitions
During the commands:
	- btrfs filesystem show
	- btrfs device scan
the devices "scanned" are extracted from /proc/partitions. This
should avoid to scan devices not suitable for a btrfs filesystem like cdrom
and floppy or to scan not existant devices.
The old behavior (scan all the block devices under /dev) may be
forced passing the "--all-devices" switch.
2011-10-25 09:19:00 -04:00
Jan Schmidt
828f2b30df btrfs-progs: added check_mounted_where
new version of check_mounted() returning more information gathered while
searching. check_mounted() is now a wrapper for check_mounted_where(). the
new version is needed by scrub.c

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Hugo Mills <hugo@carfax.org.uk>
2011-10-25 09:18:59 -04:00
Goffredo Baroncelli
e8f47cf068 Add the "btrfs filesystem label" command
Hi all,

this patch adds the command "btrfs filesystem label" to change (or show) the
label of a filesystem.
This patch is a subset of the one written previously by Morey Roof. I
included the user space part only. So it is possible only to change/show a
label of a *single device* and *unounted* filesystem.

The reason of excluding the kernel space part, is to simplify the patch in
order to speed the check and then the merging of the patch itself. In fact I
have to point out that in the past there was almost three attempts to propose
this patch, without success neither complaints.

Chris, let me know how you want to proceed. I know that you are very busy,
and you prefer to work to stabilize btrfs instead adding new feature. But I
think that changing a label is a *essential* feature for a filesystem
managing tool. Think about a mount by LABEL.

To show a label

$ btrfs filesystem label <device>

To set a label

$ btrfs filesystem label <device> <newlabel>

Please guys, give a look to the source.
Comments are welcome.

You can pull the source from the branch "label" of the repository
http://cassiopea.homelinux.net/git/btrfs-progs-unstable.git

Regards
G.Baroncelli

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-10-25 09:18:31 -04:00
Josef Bacik
b8802ae3fa Btrfs-progs: add support for mixed data+metadata block groups
So alot of crazy people (I'm looking at you Meego) want to use btrfs on phones
and such with small devices.  Unfortunately the way we split out metadata/data
chunks it makes space usage inefficient for volumes that are smaller than
1gigabyte.  So add a -M option for mixing metadata+data, and default to this
mixed mode if the filesystem is less than or equal to 1 gigabyte.  I've tested
this with xfstests on a 100mb filesystem and everything is a-ok.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-10-25 09:18:31 -04:00
Andi Drebes
09559bfe7b multidevice support for check_mounted
Check_mount() should also work with multi device filesystems.
This patch adds checks that allow to detect if a file is a device
file used by a mounted single or multi device btrfs or if it is a
regular file used by a loopback device that is part of a mounted
single or multi device btrfs.

The single device checks also work for non-btrfs filesystems.
This might be helpful to prevent users from running btrfs programs
(e.g. mkfs.btrfs) accidentally on a filesystem used somewhere else.

Signed-off-by: Andi Drebes <lists-receive@programmierforen.de>
2010-09-23 20:26:49 -04:00
Shen Feng
2e1ca67177 Add error processing for btrfsctl -a
brfsctl -a will do nothing and no error is output 
if btrfs.ko is not inserted.

Since no caller do error processing for btrfs_register_one_device,
make its return void and do error processing inside.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
2009-01-07 14:57:11 -05:00
Chris Mason
8bfbb6b6f8 Update the Ext3 converter
The main changes in this patch are adding chunk handing and data relocation
ability. In the last step of conversion, the converter relocates data in system
chunk and move chunk tree into system chunk. In the rollback process, the
converter remove chunk tree from system chunk and copy data back.

Regards
YZ
---
2008-04-22 14:06:56 -04:00
Chris Mason
358564890a Add a command to show all of the btrfs filesystems on the box (btrfs-show) 2008-04-22 14:06:31 -04:00
Chris Mason
0e08036ee4 Add checks to avoid adding the same device twice during mkfs 2008-04-18 10:45:17 -04:00
Chris Mason
588bb9dfff Add support for filesystem labels via mkfs.btrfs -L 2008-04-18 10:31:42 -04:00
Goldwyn Rodrigues
c2c5e3e7e5 check if partition is mounted before mkfs
This saves from the blunder of formatting a live mounted filesystem.
This can be extended to get the mount flags of the filesystem
mounted.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@gmail.com>
2008-04-01 10:36:46 -04:00
Chris Mason
0dcfa3b827 Walk all block devices looking for btrfs 2008-03-24 15:05:44 -04:00
Chris Mason
26afd0f31d ioctls to scan for btrfs filesystems 2008-03-24 15:04:49 -04:00
Chris Mason
510be29677 Add support for multiple devices per filesystem 2008-03-24 15:03:18 -04:00
Yan
7777e63b42 Update btrfs-progs to match kernel sources 2008-01-04 10:38:22 -05:00