Adding this table will make extending btrfs-progs with new checksum types
easier.
Also add accessor functions to access the table fields.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add an option to mkfs to specify which checksum algorithm will be used
for the filesystem. Currently only crc32c is supported.
The option name is -c, presumably one of the comonly used options so it
gets the lowercase option.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the checksum type to csum_tree_block_size(), __csum_tree_block_size()
and verify_tree_block_csum_silent().
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The callers of csum_tree_block_size() blindly assume we're only having
crc32c as a possible checksum and thus pass in
btrfs_csum_sizes[BTRFS_CSUM_TYPE_CRC32] for the size argument of
csum_tree_block_size().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Similar to the changes where strerror(errno) was converted, continue
with the remaining cases where the argument was stored in another
variable.
The savings in object size are about 4500 bytes:
$ size btrfs.old btrfs.new
text data bss dec hex filename
805055 24248 19748 849051 cf49b btrfs.old
804527 24248 19748 848523 cf28b btrfs.new
Signed-off-by: David Sterba <dsterba@suse.com>
The old flag OPEN_CTREE_FS_PARTIAL is in fact quite easy to be confused
with OPEN_CTREE_PARTIAL, which allow btrfs-progs to open damaged
filesystem (like corrupted extent/csum tree).
However OPEN_CTREE_FS_PARTIAL, unlike its name, is just allowing
btrfs-progs to open fs with temporary superblocks (which only has 6
basic trees on SINGLE meta/sys chunks).
The usage of FS_PARTIAL is really confusing here.
So rename OPEN_CTREE_FS_PARTIAL to OPEN_CTREE_TEMPORARY_SUPER, and add
extra comment for its behavior.
Also rename BTRFS_MAGIC_PARTIAL to BTRFS_MAGIC_TEMPORARY to keep the
naming consistent.
And with above comment, the usage of FS_PARTIAL in dump-tree is
obviously incorrect, fix it.
Fixes: 8698a2b9ba ("btrfs-progs: Allow inspect dump-tree to show specified tree block even some tree roots are corrupted")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel code no longer has BTRFS_CRC32_SIZE and only uses
btrfs_csum_sizes[]. So, update the progs code as well.
Suggested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the top-level subvolume lacks the UUID. As a result, both
non-snapshot subvolume and snapshot of top-level subvolume do not have
Parent UUID and cannot be distinguisued. Therefore "fi show" of
top-level lists all the subvolumes which lacks the UUID in
"Snapshot(s)" filed. Also, it lacks the otime information.
Fix this by adding the UUID and otime at the mkfs time. As a
consequence, snapshots of top-level subvolume now have a Parent UUID and
UUID tree will create an entry for top-level subvolume at mount time.
This should not cause the problem for current kernel, but user program
which relies on the empty Parent UUID may be affected by this change.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As btrfs is specific to Linux, %m can be used instead of strerror(errno)
in format strings. This has some size reduction benefits for embedded
systems.
glibc, musl, and uclibc-ng all support %m as a modifier to printf.
A quick glance at the BIONIC libc source indicates that it has
support for %m as well. BSDs and Windows do not but I do believe
them to be beyond the scope of btrfs-progs.
Compiled sizes on Ubuntu 16.04:
Before:
3916512 btrfs
233688 libbtrfs.so.0.1
4899 bcp
2367672 btrfs-convert
2208488 btrfs-corrupt-block
13302 btrfs-debugfs
2152160 btrfs-debug-tree
2136024 btrfs-find-root
2287592 btrfs-image
2144600 btrfs-map-logical
2130760 btrfs-select-super
2152608 btrfstune
2131760 btrfs-zero-log
2277752 mkfs.btrfs
9166 show-blocks
After:
3908744 btrfs
233256 libbtrfs.so.0.1
4899 bcp
2366560 btrfs-convert
2207432 btrfs-corrupt-block
13302 btrfs-debugfs
2151104 btrfs-debug-tree
2134968 btrfs-find-root
2281864 btrfs-image
2143536 btrfs-map-logical
2129704 btrfs-select-super
2151552 btrfstune
2130696 btrfs-zero-log
2276272 mkfs.btrfs
9166 show-blocks
Total savings: 23928 (24 kilo)bytes
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When creating btrfs, mkfs.btrfs will firstly create a temporary system
chunk as basis, and then created needed trees or new devices.
However the layout temporary system chunk is hard-coded and uses
reserved [0, 1M) range of devid 1.
Change the temporary chunk layout from old:
0 1M 4M 5M
|<----------- temp chunk -------------->|
And it's 1:1 mapped, which means it's a SINGLE chunk,
and stripe offset is also 0.
to new layout:
0 1M 4M 5M
|<----------- temp chunk -------------->|
And still keeps the 1:1 mapping.
However this also affects btrfs_min_dev_size() which still assume
temporary chunks starts at device offset 0.
The problem can only be exposed by "-m single" or "-M" where we reuse the
temporary chunk.
With other meta profiles, system and meta chunks are allocated by later
btrfs_alloc_chunk() call, and old SINGLE chunks are removed, so it will
be no such problem for other meta profiles.
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ folded fix for the minimal device size calculation ]
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit c11e36a29e ("Btrfs-progs: Do not force mixed block group
creation unless '-M' option is specified"), mkfs no longer use mixed
block group unless specified manually.
This breaks the minimal device size calculation, which only considered
mixed block group use case.
This patch enhances minimal device size calculation for mkfs, by using
different minimal stripe length (calculated from code) for different
profiles, and use them to calculate minimal device size.
Reported-by: Wesley Aptekar-Cassels <W.Aptekar@gmail.com>
Fixes: c11e36a29e ("Btrfs-progs: Do not force mixed block group creation unless '-M' option is specified")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
[ updated comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, only the status of block devices is checked at mkfs,
but we should also check for regular files whether they are already
formatted or mounted to prevent overwrite accidentally.
Device status is checked by test_dev_for_mkfs().
The part which is not related to block device is split from this
and used for both block device and regular file.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
test_minimum_size() function is only called to check if provided device
is large enough.
However the minimal device size only needs to be calculated once, and
can be reused everywhere.
Refactor that function to make later modification easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
make_btrfs is too long to understand, make creatation of root tree
in a function.
Some of the tree roots are now created in a loop, where the code is just
copypasted. We now make use of the reference_root_table to translate
block index to root objectid.
Signed-off-by: Gu Jinxiang <gujx@cn.fujitsu.com>
[ updated changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
There multiple places where we use well-known sizes - 1,8,16,32 megabytes. We
also have them defined as constants in the sizes.h header. So let's use them.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For code maintainability and scalability,
replace hardcoded constant with a meaningful enum.
Signed-off-by: Gu Jinxiang <gujx@cn.fujitsu.com>
[ add MKFS_ prefix ]
Signed-off-by: David Sterba <dsterba@suse.com>
Leafsize is deprecated for a long time, and kernel has already updated
ctree.h to rename sb->leafsize to sb->__unused_leafsize.
This patch will remove normal users of leafsize:
1) Remove leafsize member from btrfs_root structure
Now only root->nodesize and root->sectorisze.
No longer root->leafsize.
2) Remove @leafsize parameter from btrfs_setup_root() function
Since no root->leafsize, no need for @leafsize parameter.
The remaining user of leafsize will be:
1) btrfs inspect-internal dump-super
Reformat the "leafsize" output to "leafsize (deprecated)" and
use le32_to_cpu() to do the cast manually.
2) mkfs
We still need to set sb->__unused_leafsize to nodesize.
Do the manual cast too.
3) convert
Same as mkfs, these two superblock setup should be merged later
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Build under musl libc fails because of missing PATH_MAX and XATTR_NAME_MAX
macro declarations. Add the required headers.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
The caller of make_btrfs does not need to set it, it's for internal use
and can be read after mkfs ends.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba
Johannes Thumshirn
Yevgeny Popovych
Qu Wenruo
Misono, Tomohiro
Rosen Penev
Gu Jinxiang
Nikolay Borisov
Qu Wenruo
Baruch Siach