We have been overloading the extent_state flags for use on the extent
buffers as well. When we sync extent-io-tree.[ch] this will become
impossible, so rename these flags to EXTENT_BUFFER_* and use those
definitions instead of the extent_state definitions.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We used to store random private things into extent_states, but we
haven't done this for a while and there are no users of this code,
simply delete it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have some extra features in the btrfs-progs copy of the
extent_io_tree that don't exist in the kernel. In order to make syncing
easier simply move this functionality into btrfs_fs_info, that way we
can sync in the new extent_io_tree code and not have to worry about
breaking anything.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs-progs has a cache tree embedded in the extent_io_tree in order to
track extent buffers. We use the extent_io_tree part to track dirty,
and the cache tree to keep the extent buffers in. When we sync
extent-io-tree.[ch] we'll lose this ability, so separate out the dirty
tracking into its own extent_io_tree. Subsequent patches will adjust
the extent buffer lookup so it doesn't use the custom extent_io_tree
thing.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a cleanup patch to make syncing the btrfs kernel code into
btrfs-progs easier. In btrfs-progs we have an extra cache in the
extent_io_tree that's exclusively used for the extent buffer tracking.
In order to untangle this dependency start passing around the fs_info to
search for extent_buffers, and then have the helpers use the appropriate
structure to find the extent buffer.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For a degraded RAID5, btrfs check will fail to even read the chunk root:
# mkfs.btrfs -f -m raid5 -d raid5 $dev1 $dev2 $dev3
# wipefs -fa $dev1
# btrfs check $dev2
Opening filesystem to check...
warning, device 1 is missing
bad tree block 22036480, bytenr mismatch, want=22036480, have=0
ERROR: cannot read chunk root
ERROR: cannot open file system
[CAUSE]
Although read_tree_block() function from btrfs-progs is properly
iterating the mirrors (mirror 1 is reading from the disk directly,
mirror 2 will be rebuild from parity), the raid56 recovery path is not
handling the read error correctly.
The existing code will try to read the full stripe, but any read failure
(including missing device) will immediately cause an error:
for (i = 0; i < num_stripes; i++) {
ret = btrfs_pread(multi->stripes[i].dev->fd, pointers[i],
BTRFS_STRIPE_LEN, multi->stripes[i].physical,
fs_info->zoned);
if (ret < BTRFS_STRIPE_LEN) {
ret = -EIO;
goto out;
}
}
[FIX]
To make failed_a/failed_b calculation much easier, and properly handle
too many missing devices, here this patch will introduce a new bitmap
based solution.
The new @failed_stripe_bitmap will represent all the failed stripes.
So the initial read will mark all the missing devices in the
@failed_stripe_bitmap, and later operations will all operate on that
bitmap.
Only before we call raid56_recov(), we convert the bitmap to the old
failed_a/failed_b interface and continue.
Now btrfs check can handle above case properly:
# btrfs check $dev2
Opening filesystem to check...
warning, device 1 is missing
Checking filesystem on /dev/test/scratch2
UUID: 8b2e1cb4-f35b-4856-9b11-262d39d8458b
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space tree
[4/7] checking fs roots
[5/7] checking only csums items (without verifying data)
[6/7] checking root refs
[7/7] checking quota groups skipped (not enabled on this FS)
found 147456 bytes used, no error found
total csum bytes: 0
total tree bytes: 147456
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 139871
file data blocks allocated: 0
referenced 0
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
If we emulate a write error during commit transaction, by setting the
block device read-only, then we can easily have the following crash
using "btrfs check --clear-space-cache v2":
Opening filesystem to check...
Checking filesystem on /dev/test/scratch1
UUID: 5945915b-37f1-4bfa-9f64-684b318b8f73
Clear free space cache v2
Error writing to device 1
kernel-shared/transaction.c:156: __commit_transaction: BUG_ON `ret` triggered, value 1
./btrfs(+0x570c9)[0x562ec894f0c9]
./btrfs(+0x57167)[0x562ec894f167]
./btrfs(__commit_transaction+0x13b)[0x562ec894f7f2]
./btrfs(btrfs_commit_transaction+0x214)[0x562ec894fa64]
./btrfs(btrfs_clear_free_space_tree+0x177)[0x562ec8941ae6]
./btrfs(+0xc8958)[0x562ec89c0958]
./btrfs(+0xc9d53)[0x562ec89c1d53]
./btrfs(+0x17ec7)[0x562ec890fec7]
./btrfs(main+0x12f)[0x562ec8910908]
/usr/lib/libc.so.6(+0x232d0)[0x7ff917ee82d0]
/usr/lib/libc.so.6(__libc_start_main+0x8a)[0x7ff917ee838a]
./btrfs(_start+0x25)[0x562ec890fdc5]
Aborted (core dumped)
[CAUSE]
The call trace has shown it's a BUG_ON(), and it's from
__commit_transaction(), which is writing tree blocks back.
[FIX]
The fix is pretty simple, just return error.
In fact we even have an error value check in btrfs_commit_transaction()
just after __commit_transaction() call (although not catching the return
value from it).
And since we're here, also call btrfs_abort_transaction() to prevent
newer transactions from being started.
Now we won't have a full crash:
Opening filesystem to check...
Checking filesystem on /dev/test/scratch1
UUID: 5945915b-37f1-4bfa-9f64-684b318b8f73
Clear free space cache v2
Error writing to device 1
ERROR: failed to write bytenr 30425088 length 16384: Operation not permitted
ERROR: failed to write tree block 30425088: Operation not permitted
ERROR: failed to clear free space cache v2: -1
extent buffer leak: start 30720000 len 16384
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When transaction is aborted halfway, we can have extent buffer leaked,
and in that case, the same leaked extent buffer can be reported for
multiple times:
ERROR: failed to clear free space cache v2: -1
extent buffer leak: start 30441472 len 16384
WARNING: dirty eb leak (aborted trans): start 30441472 len 16384
extent buffer leak: start 30720000 len 16384
extent buffer leak: start 30425088 len 16384
extent buffer leak: start 30425088 len 16384 << Duplicated
WARNING: dirty eb leak (aborted trans): start 30425088 len 16384
Note that 30425088 line is reported twice (not accounting the "dirty eb
leak" line).
[CAUSE]
When we detected a leaked eb, we call free_extent_buffer_nocache(), but
free_extent_buffer_nocache() can only remove the eb when its reduced
refs is 0.
If the eb has refs 2, it will need two free_extent_buffer_nocache()
calls to remove it from the cache.
[FIX]
Just reset the eb->refs to 1 so that free_extent_buffer_nocache() can
remove it from cache for sure.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function was introduced by commit a5ce5d2198 ("btrfs-progs:
extent-cache: actually cache extent buffers") but never got utilized.
Thus we can just remove it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The BUG_ON() condition in write_data_to_disk() is no longer correct.
Now write_raid56_with_parity() will return the bytes written of last
stripe.
Thus a success writeback can trigger the BUG_ON(ret).
Fix the condition to (ret < 0).
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Shinichiro reported that "mkfs.btrfs -m DUP" is doing repeated write
into the device.
For non-zoned device this is not a big deal, but for zoned device this
is critical, as zoned device doesn't support overwrite at all.
[CAUSE]
The problem is related to write_and_map_eb() call, since commit
2a93728391 ("btrfs-progs: use write_data_to_disk() to replace
write_extent_to_disk()"), we call write_data_to_disk() for metadata
write back.
But the problem is, write_data_to_disk() will call btrfs_map_block()
with rw = WRITE.
By that btrfs_map_block() will always return all stripes, while in
write_data_to_disk() we also iterate through each mirror of the range.
This results above repeated writeback.
[FIX]
Fix this problem by completely remove @mirror argument
from write_data_to_disk().
With extra comments to explicitly show that function will write to
all mirrors.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 2a93728391 ("btrfs-progs: use write_data_to_disk() to replace write_extent_to_disk()")
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new ability is added by:
- Allow btrfs_map_block() to return the chunk type
This makes later work much easier
- Only reset stripe offset inside btrfs_map_block() when needed
Currently if @raid_map is not NULL, btrfs_map_block() will consider
this call is for WRITE and will reset stripe offset.
This is no longer the case, as for RAID56 read with mirror_num 1/0,
we will still call btrfs_map_block() with non-NULL raid_map.
Add a small check to make sure we won't reset stripe offset for
mirror 1/0 read.
- Add new helper read_raid56() to handle rebuild
We will read the full stripe (including all data and P/Q stripes)
do the rebuild, then only copy the refered part to the caller.
There is a catch for RAID6, we have no way to exhaust all combination,
so the current repair will assume the mirror = 0 data is corrupted,
then try to find a missing device.
But if no missing device can be found, it will assume P is corrupted.
This is just a guess, and can to totally wrong, but we have no better
idea.
Now btrfs-progs have full read ability for RAID56.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Those two members are a shortcut for non-RAID56 profiles.
But we should not use such shortcut, and move all our logical address
read/write to the unified read_data_from_disk()/write_data_to_disk().
With previous refactors, now we're safe to remove them.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function read_extent_from_disk() is only a wrapper to read tree
block.
And read_extent_data() is just a while loop to eliminate short read
caused by stripe boundary.
In fact, a lot of call sites of read_extent_data() are either reading
metadata (thus no possible short read) or doing extra loop by
themselves.
This patch will replace those two functions with read_data_from_disk(),
making it the only entrance for data/metadata read.
And update read_data_from_disk() to return the read bytes, so caller can
do a simple while loop.
For the few callers of read_extent_data(), open-code a small while loop
for them.
This will allow later RAID56 read repair using P/Q much easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function write_extent_to_disk() is just writing the content of a tree
block to disk.
It can not handle RAID56, and its work is the same as
write_data_to_disk().
Thus we can replace write_extent_to_disk() with write_data_to_disk()
easily.
There is only one special call site in write_raid56_with_parity(), which
can easily be replace with btrfs_pwrite() directly.
This reduce the write entrance, and make later eb::fd removal easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Wrap pread with btrfs_pread as well.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Wrap pwrite with btrfs_pwrite(). It simply calls pwrite() on non-zoned
btrfs (opened without O_DIRECT). On zoned mode (opened with O_DIRECT),
it allocates an aligned bounce buffer, copies the contents and uses it
for direct-IO writing.
Writes in device_zero_blocks() and btrfs_wipe_existing_sb() are a little
tricky. We don't have fs_info on our hands, so use zinfo to determine it
is a zoned device or not.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the GPL v2 header to files where it was missing and is not from an
external source, update to the most recent version with the address.
Signed-off-by: David Sterba <dsterba@suse.com>
