We have had working subpage support in Btrfs for many cycles now.
Generally, we do not want people creating filesystems by default
with non-4k sectorsizes since it creates portability problems.
As the subpage has stabilized it seems to be safe to do the switch.
This may still affect users that relying on the previous behaviour.
Issue: #604
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch introduces a new parser helper, parse_u64_with_suffix(),
which has a better error handling, following all the parse_*()
helpers to return non-zero value for errors.
This new helper is going to replace parse_size_from_string(), which
would directly call exit(1) to stop the whole program.
Furthermore most callers of parse_size_from_string() are expecting
exit(1) for error, so that they can skip the error handling.
For those call sites, introduce a wrapper, arg_strtou64_with_suffix(),
to do that. The only disadvantage is a little less detailed error
report for why the parse failed, but for most cases the generic error
string should be enough.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In zoned mode print zone count for each device, the zone size must be
the same so it's sufficient to print it in the summary.
$ mkfs.btrfs -O zoned /dev/nullb[0-3]
...
Zoned device: yes
Zone size: 16.00MiB
...
Devices:
ID SIZE ZONES PATH
1 512.00MiB 32 /dev/nullb0
2 256.00MiB 16 /dev/nullb1
3 1.00GiB 64 /dev/nullb2
4 2.00GiB 128 /dev/nullb3
Issue: #693
Signed-off-by: David Sterba <dsterba@suse.com>
In experimental build, read global '--param zone-size=SIZE' and use it
as emulated zone size. This is for testing only, will be promoted to a
proper option in the future.
Signed-off-by: David Sterba <dsterba@suse.com>
We need to validate the device uuid the same way as the fsid:
$ ./mkfs.btrfs --device-uuid 18eabcf0-6766-4fbf-b366-71b4ae725b2- img
btrfs-progs v6.5.2
See https://btrfs.readthedocs.io for more information.
ERROR: could not parse device UUID: 18eabcf0-6766-4fbf-b366-71b4ae725b2-
Signed-off-by: David Sterba <dsterba@suse.com>
Print the device uuid in the summary in case it's specified on the
command line, not always as it would be confusing and is not usually
needed. Can be found in 'btrfs inspect-internal dump-super' as
device_item.uuid .
Signed-off-by: David Sterba <dsterba@suse.com>
Add option --device-uuid that will set the device uuid item in super
block.
This is useful for creating a filesystem with a specific device uuid,
namely for testing.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit ("btrfs-progs: allow duplicate fsid for single device
filesystems") lets the duplicate fsid used for a new mkfs document this.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When using "mkfs.btrfs" with "--rootdir" option, the top level inode
(rootdir) will not get the same xattr from the source dir:
mkdir -p source_dir/
touch source_dir/file
setfattr -n user.rootdir_xattr source_dir/
setfattr -n user.regular_xattr source_dir/file
mkfs.btrfs -f --rootdir source_dir $dev
mount $dev $mnt
getfattr $mnt
# Nothing <<<
getfattr $mnt/file
# file: $mnt/file
user.regular_xattr <<<
[CAUSE]
In function traverse_directory(), we only call add_xattr_item() for all
the child inodes, not really for the rootdir inode itself, leading to
the missing xattr items.
Not only xattr, in fact we also miss the uid/gid/timestamps/mode for the
rootdir inode.
[FIX]
Extract a dedicated function, copy_rootdir_inode(), to handle every
needed attributes for the rootdir inode, including:
- xattr
- uid
- gid
- mode
- timestamps
Issue: #688
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running mkfs.btrfs with --rootdir on a block device, and the source
directory contains a sparse file, whose size is larger than the block
size, then mkfs.btrfs would fail:
# lsblk /dev/test/test
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
test-test 253:0 0 10G 0 lvm
# mkdir -p /tmp/output
# truncate -s 20G /tmp/output/file
# mkfs.btrfs -f --rootdir /tmp/output /dev/test/test
# sudo mkfs.btrfs -f /dev/test/scratch1 --rootdir /tmp/output/
btrfs-progs v6.3.3
See https://btrfs.readthedocs.io for more information.
ERROR: unable to zero the output file
[CAUSE]
Mkfs.btrfs would try to zero out the target file according to the total
size of the directory.
However the directory size is calculated using the file size, not the
real bytes taken by the file, thus for such sparse file with holes only,
it would still take 20G.
Then we would use that 20G size to zero out the target file, but if the
target file is a block device, we would fail as we can not enlarge a block
device.
[FIX]
When zeroing the file, we only enlarge it if the target is a regular
file.
Otherwise we warn about the size and continue.
Please note that, since "mkfs.btrfs --rootdir" doesn't handle sparse
file any differently from regular file, above case would still fail due
to ENOSPC, as will write zeros into the target file inside the fs.
Proper handling for sparse files would need a new series of patch to
address.
Issue: #653
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel patches for RST and squota are queued for 6.7, we need to be
able to test the features so it's not necessary to hide the mkfs support
under experimental build. The kernel may still need debug build to
enable mount.
Signed-off-by: David Sterba <dsterba@suse.com>
This function is only used in mkfs, and doesn't exist in the kernel in
ctree.c. Additionally we have a uuid lookup function to see if the uuid
exists in the tree, which for mkfs it won't because we just created the
tree. Move btrfs_uuid_tree_add into mkfs, and remove the lookup
function as it's not needed.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function and it's related functions only exist for the utilities
that populate existing file systems, and do not exist in the upstream
kernel. Move this function and the related function into it's own
common source file and out of the kernel-shared sources, and then update
all of the users to include the new location of this code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This simply zero's out the path, and this is used everywhere we use a
stack path. Drop this usage and simply init the path's to empty instead
of using a function to do the memset.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the ability to enable simple quotas from mkfs with '-O squota'
There is some complication around handling enable_gen while still
counting the root node of an fs. To handle this, employ a hack of doing
a no-op write on the root node to bump its generation up above that of
the qgroup enable generation, which results in counting it properly.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
For single device btrfs filesystem, allow duplicate fsid to be created.
This should be used with caution as more devices with the same uuid
could be confused with each other.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Allow for RAID levels 0, 1 and 10 on zoned devices if the RAID stripe tree
is used.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The struct open_ctree_flags currently holds arguments for
open_ctree_fs_info(), it can be confusing when mixed with a local variable
named open_ctree_flags as below in the function cmd_inspect_dump_tree().
cmd_inspect_dump_tree()
::
struct open_ctree_flags ocf = { 0 };
::
unsigned open_ctree_flags;
So rename struct open_ctree_flags to struct open_ctree_args.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
mkfs.btrfs help message for --quiet is 'no message except errors' so
we probably ought to silence this as well in the quiet case.
Author: Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Print the source directory for --rootdir and if --shrink is used. With
-vv then print the individual files as added:
$ mkfs.btrfs --rootdir dir --shrink -vv img
...
Rootdir from: Documentation
ADD: /btrfs-progs/Documentation/btrfs-check.rst
...
ADD: /btrfs-progs/Documentation/btrfs-send.rst
Shrink: yes
Label: (null)
UUID: 40d3a16f-02d8-40d7-824b-239cee528093
...
The 'Rootdir from' is printed before the files are added so there's now
message before the files are added which could take some time.
Issue: #627
Signed-off-by: David Sterba <dsterba@suse.com>
This patch would modify btrfs_csum_file_block() to handle csum type
other than the one used in the current fs.
The new data checksum would use a different objectid (-13) to
distinguish with the existing one (-10).
This needs to change tree-checker to skip the item size checks,
since new csum can be larger than the original csum.
After this stage, the resulted csum tree would look like this:
item 0 key (CSUM_CHANGE EXTENT_CSUM 13631488) itemoff 8091 itemsize 8192
range start 13631488 end 22020096 length 8388608
item 1 key (EXTENT_CSUM EXTENT_CSUM 13631488) itemoff 7067 itemsize 1024
range start 13631488 end 14680064 length 1048576
Note the itemsize is 8 times the original one, as the original csum is
CRC32, while target csum is SHA256, which is 8 times the size.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function write_and_map_eb() is quite abused as a way to write any
generic buffer back to disk.
But we have a more suitable function already, write_data_to_disk().
This patch would remove the abused write_data_to_disk() calls, and
convert the only three valid call sites to write_data_to_disk() instead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch syncs file-item.h into btrfs-progs. This carries with it an
API change for btrfs_del_csums, which takes a root argument in the
kernel, so all callsites have been updated accordingly.
I didn't sync file-item.c because it carries with it a bunch of bio
related helpers which are difficult to adapt to the kernel.
Additionally there's a few helpers in the local copy of file-item.c that
aren't in the kernel that are required for different tools.
This requires more cleanups in both the kernel and progs in order to
sync file-item.c, so for now just do file-item.h in order to pull things
out of ctree.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This syncs accessors.[ch] from the kernel. For the most part
accessors.h will remain the same, there's just some helpers that need to
be adjusted for eb->data instead of eb->pages. Additionally accessors.c
needed to be completely updated to deal with this as well.
This is a set of files where we will likely only sync the header going
forward, and leave the C file in place as it needs to be specific to
btrfs-progs.
This forced a few "unrelated" changes
- Using btrfs_dir_item_ftype() instead of btrfs_dir_item_type(). This
is due to the encryption changes, and was simpler to just do in this
patch.
- Adjusting some of the print tree code to use the actual helpers and
not the btrfs-progs ones.
A local definition of static_assert is used to avoid compilation
failures on older gcc (< 9) where the 2nd parameter is mandatory.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to keep this file locally as we want to be uptodate with
upstream, so we can build btrfs-progs regardless of which kernel is
currently installed. Sync this with the upstream version and put it in
kernel-shared/uapi to maintain some semblance of where this file comes
from.
There are some changes that need to be synced back to kernel. A local
definition of static_assert is used to avoid compilation problems on gcc
(< 9) due to mandatory 2nd parameter.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While syncing messages.[ch] I had to back out the ASSERT() code in
kerncompat.h, which means we now rely on the kernel code for ASSERT().
In order to maintain some semblance of separation introduce UASSERT()
and use that in all the purely userspace code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The *64 interfaces, such as fstat64, off64_t, etc, are legacy interfaces
created at a time when 64-bit file support was still new. They are
generally exposed when defining a macro named _LARGEFILE64_SOURCE, as
e.g. the glibc docs[0] say.
The modern way to utilise largefile support, is to continue to use the
regular interfaces (off_t, fstat, ..), and define _FILE_OFFSET_BITS=64.
We already use the autoconf macro AC_SYS_LARGEFILE[1] which arranges this
and sets this macro for us. Therefore, we can utilise the non-64 names
without fear of breaking on 32-bit systems.
This fixes the build against musl libc, ever since musl dropped the
*64 compat from interfaces by default[2] just for _GNU_SOURCE, unless
_LARGEFILE64_SOURCE is defined. However, there are plans for a future
removal of the whole *64 header API, and that workaround (adding another
define) might cease to exist.
So, rename all *64 API use to the regular non-suffixed names. For
consistency, rename the internal functions that were *64 named
(lstat64_path, ..) too.
This should have no regressions on any platform.
[0]: https://www.gnu.org/software/libc/manual/html_node/Feature-Test-Macros.html#index-_005fLARGEFILE64_005fSOURCE
[1]: https://www.gnu.org/software/autoconf/manual/autoconf-2.67/html_node/System-Services.html
[2]: 25e6fee27f
Pull-request: #615
Signed-off-by: psykose <alice@ayaya.dev>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is an internal bug report that, after mkfs.btrfs there is a chance
that no /dev/disk/by-uuid/<uuid> symlink is not created at all.
[CAUSE]
That uuid symlink is created by udev, which listens to inotify
IN_CLOSE_WRITE events from all block devices.
After such IN_CLOSE_WRITE event is triggered, udev would *disable*
inotify for that block device, and do a blkid scan on it.
After the blkid scan is done, re-enables the inotify listening.
This means normally mkfs tools should open the fd, do all the writes,
and close the fd after everything is done.
But unfortunately for mkfs.btrfs, it's not the case, we have a lot of
phases separated by different close() calls:
open_ctree() would open fds of each involved device
and close them at close_ctree()
Only after close_ctree() we have a valid superblock -\
|
|<------- A -------->|<--------- B --------->|<------- C ------->|
| |
| `- open a new fd for make_btrfs()
| and close it before open_ctree()
| The device contains invalid sb.
|
`- open a new fd for each device, then call
btrfs_prepare_device(), then close the fd.
The device would contain no valid superblock.
If at the close() of phase A udev event is triggered, while doing udev
scan we go into phase C (but before the new valid super blocks written),
udev would only see no superblock or invalid superblock.
Then phase C finished, udev resumes its inotify listening, but at this
time mkfs is finished, while udev only sees the premature data from
phase A, and misses the IN_CLOSE_WRITE events from phase C.
[FIX]
Instead of opening and closing a new fd for each device, re-use the fd
opened during prepare_one_device(), and close all the fds until
close_ctree() is called.
By this, although we may still have race between close_ctree() and
explicit close() calls, at least udev can always see the properly
written super blocks.
To compensate the change, some extra cleanups are made:
- Do not touch @device_count
Which makes later prepare_ctx iteration much easier.
- Remove top-level @fd variable
Instead go with prepare_ctx[i].fd.
- Do not open with O_RDWR in test_dev_for_mkfs()
as test_dev_for_mkfs() would close the fd, if we go O_RDWR, it can
cause the udev race.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The option -R|--runtime-features was introduced to support features that
don't result in a full incompat flag change, thus things like
free-space-tree and quota features are put here.
But to end users, such separation of features is not helpful and can be
sometimes confusing.
Thus we're already migrating those runtime features into -O|--features
option under experimental builds.
I believe this is the proper time to move those runtime features into
-O|--features option, and mark the -R|--runtime-features option
deprecated.
For now we still keep the old option as for compatibility purposes.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After previous change to usage() that now has the return code, there's
no purpose of the print_usage() wrapper so it can be removed.
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Currently cli/009 test case failed with different exit number:
====== RUN CHECK /home/adam/btrfs-progs/btrfstune --help
usage: btrfstune [options] device
[...]
failed: /home/adam/btrfs-progs/btrfstune --help
test failed for case 009-btrfstune
[CAUSE]
In tune/main.c, we have the following call on usage():
static void print_usage(int ret)
{
usage(&tune_cmd);
exit(ret);
}
However usage() itself would always call exit(1):
void usage(const struct cmd_struct *cmd)
{
usage_command_usagestr(cmd->usagestr, NULL, 0, true, true);
exit(1);
}
This makes prevents any caller of usage() to modify its exit number.
[FIX]
Add a new argument @error for print_usage(), so we can properly return 0
for -h/--help usage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prepare a single location that will detect or set accelerated versions
of hash algorithms. Right now it's the crc32c, blake2 and sha256 do
an if-else switch while crc32c sets a function pointer.
Signed-off-by: David Sterba <dsterba@suse.com>
[WARNING]
Clang 15.0.7 warns about several unused variables:
kernel-shared/zoned.c:829:6: warning: variable 'num_sequential' set but not used [-Wunused-but-set-variable]
u32 num_sequential = 0, num_conventional = 0;
^
cmds/scrub.c:1174:6: warning: variable 'n_skip' set but not used [-Wunused-but-set-variable]
int n_skip = 0;
^
mkfs/main.c:493:6: warning: variable 'total_block_count' set but not used [-Wunused-but-set-variable]
u64 total_block_count = 0;
^
image/main.c:2246:6: warning: variable 'bytenr' set but not used [-Wunused-but-set-variable]
u64 bytenr = 0;
^
[CAUSE]
Most of them are just straightforward set but not used variables.
The only exception is total_block_count, which has commented out code
relying on it.
[FIX]
Just remove those variables, and for @total_block_count, also remove the
comments.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prior to version 2.38, libblkid fails to detect zoned mode's superblock
location resulting in blkid failing to detect btrfs on zoned block
devices. This patch suggest to the user to upgrade libblkid if it
detects a version lower then 2.38.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Print warning when one of the following is requested by some command
line option:
- btrfstune -b: conversion to block-group-tree
- mkfs.btrfs --num-global-roots: extent-tree-v2
- btrfs-image -d: dump image with data
Issue: #523
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Even with chunk_objectid bug fixed, mkfs.btrfs can still caused stack
overflow when enabling extent-tree-v2 feature (need experimental
features enabled):
# ./mkfs.btrfs -f -O extent-tree-v2 ~/test.img
btrfs-progs v5.19.1
See http://btrfs.wiki.kernel.org for more information.
ERROR: superblock magic doesn't match
NOTE: several default settings have changed in version 5.15, please make sure
this does not affect your deployments:
- DUP for metadata (-m dup)
- enabled no-holes (-O no-holes)
- enabled free-space-tree (-R free-space-tree)
Label: (null)
UUID: 205c61e7-f58e-4e8f-9dc2-38724f5c554b
Node size: 16384
Sector size: 4096
Filesystem size: 512.00MiB
Block group profiles:
Data: single 8.00MiB
Metadata: DUP 32.00MiB
System: DUP 8.00MiB
SSD detected: no
Zoned device: no
=================================================================
[... Skip full ASAN output ...]
==65655==ABORTING
[CAUSE]
For experimental build, we have unified feature output, but the old
buffer size is only 64 bytes, which is too small to cover the new full
feature string:
extref, skinny-metadata, no-holes, free-space-tree, block-group-tree, extent-tree-v2
Above feature string is already 84 bytes, over the 64 on-stack memory
size.
This can also be proved by the ASAN output:
==65655==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7ffc4e03b1d0 at pc 0x7ff0fc05fafe bp 0x7ffc4e03ac60 sp 0x7ffc4e03a408
WRITE of size 17 at 0x7ffc4e03b1d0 thread T0
#0 0x7ff0fc05fafd in __interceptor_strcat /usr/src/debug/gcc/libsanitizer/asan/asan_interceptors.cpp:377
#1 0x55cdb7b06ca5 in parse_features_to_string common/fsfeatures.c:316
#2 0x55cdb7b06ce1 in btrfs_parse_fs_features_to_string common/fsfeatures.c:324
#3 0x55cdb7a37226 in main mkfs/main.c:1783
#4 0x7ff0fbe3c28f (/usr/lib/libc.so.6+0x2328f)
#5 0x7ff0fbe3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#6 0x55cdb7a2cb34 in _start ../sysdeps/x86_64/start.S:115
[FIX]
Introduce a new macro, BTRFS_FEATURE_STRING_BUF_SIZE, along with a new
sanity check helper, btrfs_assert_feature_buf_size().
The problem is I can not find a build time method to verify
BTRFS_FEATURE_STRING_BUF_SIZE is large enough to contain all feature
names, thus have to go the runtime function to do the BUG_ON() to verify
the macro size.
Now the minimal buffer size for experimental build is 138 bytes, just
bump it to 160 for future expansion.
And if further features go beyond that number, mkfs.btrfs/btrfs-convert
will immediately crash at that BUG_ON(), so we can definitely detect it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When enabling extent-tree-v2 feature at mkfs time (need to enable
experimental features), mkfs.btrfs will crash:
# ./mkfs.btrfs -f -O extent-tree-v2 ~/test.img
btrfs-progs v5.19.1
See http://btrfs.wiki.kernel.org for more information.
ERROR: superblock magic doesn't match
NOTE: several default settings have changed in version 5.15, please make sure
this does not affect your deployments:
- DUP for metadata (-m dup)
- enabled no-holes (-O no-holes)
- enabled free-space-tree (-R free-space-tree)
Segmentation fault (core dumped)
[CAUSE]
The block group tree looks like this after make_btrfs() call:
(gdb) call btrfs_print_tree(root->fs_info->block_group_root->node, 0)
leaf 1163264 items 1 free space 16234 generation 1 owner BLOCK_GROUP_TREE
leaf 1163264 flags 0x0() backref revision 1
checksum stored f137c1ac
checksum calced f137c1ac
fs uuid 450d4b15-4954-4574-9801-8c6d248aaec6
chunk uuid 4c4cc54d-f240-4aa4-b88b-bd487db43444
item 0 key (1048576 BLOCK_GROUP_ITEM 4194304) itemoff 16259 itemsize 24
block group used 131072 chunk_objectid 256 flags SYSTEM|single
^^^
This looks completely sane, but notice that chunk_objectid 256.
That 256 value is the expected one for regular non-extent-tree-v2 btrfs,
but for extent-tree-v2, chunk_objectid is reused as the global id of
extent tree where the block group belongs to.
With the old 256 value as chunk_objectid, btrfs will not find an extent
tree root for the block group, and return NULL for btrfs_extent_root()
call, and trigger segfault.
This is a regression caused by commit 1430b41427 ("btrfs-progs:
separate block group tree from extent tree v2"), which doesn't take
extent-tree-v2 on-disk format into consideration.
[FIX]
For the initial btrfs created by make_btrfs(), all block group items
will be in extent-tree global id 0, thus we can reset chunk_objectid to
0, if and only if extent-tree-v2 is enabled.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Commit "btrfs-progs: prepare merging compat feature lists" tries to
merged "-O" and "-R" options, as they don't correctly represents
btrfs features.
But that commit caused the following bug during mkfs for experimental
build:
$ mkfs.btrfs -f -O block-group-tree /dev/nvme0n1
btrfs-progs v5.19.1
See http://btrfs.wiki.kernel.org for more information.
ERROR: superblock magic doesn't match
ERROR: illegal nodesize 16384 (not equal to 4096 for mixed block group)
[CAUSE]
Currently btrfs_parse_fs_features() will return a u64, and reuse the
same u64 for both incompat and compat RO flags for experimental branch.
This can easily leads to conflicts, as
BTRFS_FEATURE_INCOMPAT_MIXED_BLOCK_GROUP and
BTRFS_FEATURE_COMPAT_RO_BLOCK_GROUP_TREE both share the same bit
(1 << 2).
Thus for above case, mkfs.btrfs believe it has set MIXED_BLOCK_GROUP
feature, but what we really want is BLOCK_GROUP_TREE.
[FIX]
Instead of incorrectly re-using the same bits in btrfs_feature, split
the old flags into 3 flags:
- incompat_flag
- compat_ro_flag
- runtime_flag
The first two flags are easy to understand, the corresponding flag of
each feature.
The last runtime_flag is to compensate features which doesn't have any
on-disk flag set, like QUOTA and LIST_ALL.
And since we're no longer using a single u64 as features, we have to
introduce a new structure, btrfs_mkfs_features, to contain above 3
flags.
This also mean, things like default mkfs features must be converted to
use the new structure, thus those old macros are all converted to
const static structures:
- BTRFS_MKFS_DEFAULT_FEATURES + BTRFS_MKFS_DEFAULT_RUNTIME_FEATURES
-> btrfs_mkfs_default_features
- BTRFS_CONVERT_ALLOWED_FEATURES -> btrfs_convert_allowed_features
And since we're using a structure, it's not longer as easy to implement
a disallowed mask.
Thus functions with @mask_disallowed are all changed to using
an @allowed structure pointer (which can be NULL).
Finally if we have experimental features enabled, all features can be
specified by -O options, and we can output a unified feature list,
instead of the old split ones.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running mkfs tests on a newly rebooted minimal system, it can cause
mkfs/009 to fail.
The reproduce steps requires /tmp to has minimal files in the first
place.
# mkdir /tmp/rootdir
# xfs_io -f -c "pwrite 0 16k" /tmp/rootdir
# mkfs.btrfs --rootdir /tmp/rootdir -f $dev
# btrfs check $dev
Opening filesystem to check...
Checking filesystem on /dev/test/scratch1
UUID: 6821b3db-f056-4c18-b797-32679dcd4272
[1/7] checking root items
[2/7] checking extents
data backref 13631488 root 5 owner 170 offset 0 num_refs 0 not found in extent tree
incorrect local backref count on 13631488 root 5 owner 170 offset 0 found 1 wanted 0 back 0x55ff6cd72260
backref 13631488 root 5 not referenced back 0x55ff6cd4c1f0
incorrect global backref count on 13631488 found 2 wanted 1
backpointer mismatch on [13631488 16384]
ERROR: errors found in extent allocation tree or chunk allocation
[CAUSE]
The extent tree has the following weird item:
item 0 key (13631488 EXTENT_ITEM 16384) itemoff 16250 itemsize 33
refs 1 gen 0 flags DATA
tree block backref root FS_TREE
This is an extent item for data, thus it should not have an inline tree
backref.
Then checking the fs tree:
item 0 key (170 INODE_ITEM 0) itemoff 16123 itemsize 160
generation 7 transid 0 size 16384 nbytes 16384
block group 0 mode 100600 links 1 uid 1000 gid 1000 rdev 0
sequence 0 flags 0x0(none)
atime 1664866393.0 (2022-10-04 14:53:13)
ctime 1664863510.0 (2022-10-04 14:05:10)
mtime 1664863455.0 (2022-10-04 14:04:15)
otime 0.0 (1970-01-01 08:00:00)
There is an inode item before the root dir inode.
And that inode number 170 is causing the problem.
In traverse_directory(), we use the inode number reported from stat()
directly as btrfs inode number, and pass it to
btrfs_record_file_extent(), which finally calls btrfs_inc_extent_ref(),
with above 170 passed as @owner parameter.
But inside btrfs_inc_extent_ref() we use that @owner value to determine
if it's a data backref.
Since we got a smaller than BTRFS_FIRST_FREE_OBJECTID, btrfs treats it
as tree block, and cause the above problem.
[FIX]
As a quick fix, always add BTRFS_FIRST_FREE_OBJECTID to all inode number
directly grabbed from stat().
And add an ASSERT() in __btrfs_record_file_extent() to catch unexpected
objectid.
This is not a perfect solution, as the resulted fs will has a huge gap
in its inodes:
item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
item 4 key (426 INODE_ITEM 0) itemoff 15883 itemsize 160
For a proper fix, we should allocate new btrfs inode numbers in a
sequential order, but that would be another series of patches.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a group of helpers to read device size, the btrfs_device_size
should be one of them. Rename it and so minor cleanup.
Signed-off-by: David Sterba <dsterba@suse.com>
Replace BUG_ON after transaction start failures, all the functions
already handle errors and return them to the caller. The other error
handling is for impossible conditions.
Signed-off-by: David Sterba <dsterba@suse.com>
