[BUG]
Command `btrfs scrub start -B` and `btrfs scrub status` are reporting
very different results for "Total to scrub":
$ sudo btrfs scrub start -B /mnt/btrfs/
scrub done for c107ef62-0a5d-4fd7-a119-b88f38b8e084
Scrub started: Mon Jun 5 07:54:07 2023
Status: finished
Duration: 0:00:00
Total to scrub: 1.52GiB
Rate: 0.00B/s
Error summary: no errors found
$ sudo btrfs scrub status /mnt/btrfs/
UUID: c107ef62-0a5d-4fd7-a119-b88f38b8e084
Scrub started: Mon Jun 5 07:54:07 2023
Status: finished
Duration: 0:00:00
Total to scrub: 12.00MiB
Rate: 0.00B/s
Error summary: no errors found
This can be very confusing for end users.
[CAUSE]
It's the function print_fs_stat() handling the "Total to scrub" output.
For `btrfs scrub start` command, we use the used bytes (aka, the total
used dev extents of a device) for output.
This is not really accurate, as the chunks may be mostly empty just like
the following:
$ btrfs fi df /mnt/btrfs/
Data, single: total=1.01GiB, used=9.06MiB
System, DUP: total=40.00MiB, used=64.00KiB
Metadata, DUP: total=256.00MiB, used=1.38MiB
GlobalReserve, single: total=22.00MiB, used=0.00B
Thus we're reporting 1.5GiB to scrub (1.01GiB + 40MiB * 2 + 256MiB * 2).
But in reality, we only scrubbed 12MiB
(9.06MiB + 64KiB * 2 + 1.38MiB * 2).
[FIX]
Instead of using the used dev-extent bytes of a device, go with proper
scrubbed bytes for each device.
This involves print_fs_stat() and print_scrub_dev() called inside
scrub_start().
Now the output should match each other.
Issue: #636
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to keep this file locally as we want to be uptodate with
upstream, so we can build btrfs-progs regardless of which kernel is
currently installed. Sync this with the upstream version and put it in
kernel-shared/uapi to maintain some semblance of where this file comes
from.
There are some changes that need to be synced back to kernel. A local
definition of static_assert is used to avoid compilation problems on gcc
(< 9) due to mandatory 2nd parameter.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[WARNING]
Clang 15.0.7 warns about several unused variables:
kernel-shared/zoned.c:829:6: warning: variable 'num_sequential' set but not used [-Wunused-but-set-variable]
u32 num_sequential = 0, num_conventional = 0;
^
cmds/scrub.c:1174:6: warning: variable 'n_skip' set but not used [-Wunused-but-set-variable]
int n_skip = 0;
^
mkfs/main.c:493:6: warning: variable 'total_block_count' set but not used [-Wunused-but-set-variable]
u64 total_block_count = 0;
^
image/main.c:2246:6: warning: variable 'bytenr' set but not used [-Wunused-but-set-variable]
u64 bytenr = 0;
^
[CAUSE]
Most of them are just straightforward set but not used variables.
The only exception is total_block_count, which has commented out code
relying on it.
[FIX]
Just remove those variables, and for @total_block_count, also remove the
comments.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[FALSE ALERT]
Unlike gcc, clang doesn't really understand the comments, thus it's
reportings tons of fall through related errors:
cmds/reflink.c:124:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
case 'r':
^
cmds/reflink.c:124:3: note: insert '__attribute__((fallthrough));' to silence this warning
case 'r':
^
__attribute__((fallthrough));
cmds/reflink.c:124:3: note: insert 'break;' to avoid fall-through
case 'r':
^
break;
[CAUSE]
Although gcc is fine with /* fallthrough */ comments, clang is not.
[FIX]
So just introduce a fallthrough macro to handle the situation properly,
and use that macro instead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace printf by the level-aware helper. No change for commands that
don't have the global -q/-v options, otherwise the output can be
quieted.
Signed-off-by: David Sterba <dsterba@suse.com>
Use LOG_DEFAULT message level for all commands where it currently uses
the LOG_ALWAYS level. There are now hardcoded values in many other calls
to pr_verbose and this will be updated in following patches.
Signed-off-by: David Sterba <dsterba@suse.com>
Rename MUST_LOG Use a prefix LOG_ so we can add more levels, use it
where it was hardcoded as argument to pr_verbose.
Signed-off-by: David Sterba <dsterba@suse.com>
The preferred order:
- system headers
- standard headers
- libraries
- kernel library
- kernel shared
- common headers
- other tools
- own headers
Signed-off-by: David Sterba <dsterba@suse.com>
There is a support to build on android but it's incomplete and there's
little interest to fix it.
To reinstate we'll need:
* fix remaining issues from
lore.kernel.org/linux-btrfs/20170802185111.187922-1-filipbystricky@google.com
* find CI host with Android support to verify build, either local eg. in
docker or in a hosted environment
* switch the make-based build to 'soong' (source.android.com/setup/build)
Issue: #357
Signed-off-by: David Sterba <dsterba@suse.com>
There's a group of functions that are related to opening filesystem in
various modes, this can be moved to a separate file.
Signed-off-by: David Sterba <dsterba@suse.com>
The two variants of unit options are not suitable for all commands, the
short options could interfere with existing options or limit future
extensions.
In 'filesystem du' the short options are not documented neither in help
text, nor in documentation so fix the code
In 'scrub status' it's the same but the documentation needs to be fixed
as well.
Signed-off-by: David Sterba <dsterba@suse.com>
Add long options for size units, affecting total and currently scrubbed
bytes. The rate depends on the device speed and could be
disproportionate to the size so it is not affected, except the --raw
option that is in bytes without unit suffix.
Signed-off-by: David Sterba <dsterba@suse.com>
Add ratio of the bytes scrubbed to total in the status output, like:
Total to scrub: 2.54TiB
Bytes scrubbed: 1.59TiB (62.58%)
Signed-off-by: David Sterba <dsterba@suse.com>
Currently most btrfs commands separate their output with empty lines
which makes them more human readable. The scrub cmd when used with -d
arg to show per device information does not. It makes it harder to find
values for current disk because they are not separated from each other.
This commit adds an empty line after each device summary to make it
match other btrfs cmd outputs.
For some reason this was the only line in scrub status that did not
start from capital letter. Now it is more consistent with the rest.
Pull-request: #256
Author: Rafostar <Rafostar@users.noreply.github.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Many subcommands have their own verbosity options that are being
superseded by the global options. Update the help text to reflect that
where applicable.
Signed-off-by: David Sterba <dsterba@suse.com>
Enable the quiet option to the scrub cancel command.
Does the job quietly. For example:
$ btrfs -q scrub cancel <mnt>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ETA is calculated in a wrong way. It should be just current time in
seconds + sec_left, independently if the job was resumed or not.
Pull-request: #190
Signed-off-by: Grzegorz Kowal <grzegorz@amuncode.org>
Signed-off-by: David Sterba <dsterba@suse.com>
When a scrub completes or is cancelled, statistics are updated for
reporting in a later btrfs scrub status command and for resuming the
scrub. Most statistics (such as bytes scrubbed) are additive so scrub
adds the statistics from the current run to the saved statistics.
However, the last_physical statistic is not additive. The value from the
current run should replace the saved value. The current code incorrectly
adds the last_physical from the current run to the previous saved value.
This bug causes the resume point to be incorrectly recorded, so large
areas of the disk are skipped when the scrub resumes. As an example,
assume a disk had 1000000 bytes and scrub was cancelled and resumed each
time 10% (100000 bytes) had been scrubbed.
Run | Start byte | bytes scrubbed | kernel last_physical | saved last_physical
1 | 0 | 100000 | 100000 | 100000
2 | 100000 | 100000 | 200000 | 300000
3 | 300000 | 100000 | 400000 | 700000
4 | 700000 | 100000 | 800000 | 1500000
5 | 1500000 | 0 | immediately completes| completed
In this example, only 40% of the disk is actually scrubbed.
This patch changes the saved/displayed last_physical to track the last
reported value from the kernel.
Signed-off-by: Graham R. Cobb <g.btrfs@cobb.uk.net>
Signed-off-by: David Sterba <dsterba@suse.com>
