It's res instead of ret, wrong error message could be prointed in case
of error.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
my troubleshooting experience says have unique error string per module.
In the below eg, its one additional step to know error line,
cat -n cmds-device.c | egrep "error removing the device"
185 "ERROR: error removing the device '%s' - %s\n",
190 "ERROR: error removing the device '%s' - %s\n",
which is completely avoidable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[merged the two messages into one]
Signed-off-by: David Sterba <dsterba@suse.cz>
We're not using it anywhere. The best practice is to add enums with
values > 255 for the long options, option index counting is error prone.
Signed-off-by: David Sterba <dsterba@suse.cz>
Add an alias to -h to 'filesystem usage', 'filesystem df' and
'device usage' commands, same as the traditional 'df'.
Signed-off-by: David Sterba <dsterba@suse.cz>
The main point of this is to load the device and chunk infos at one
place and pass down to the printers. The EPERM is handled separately, in
case kernel does not give us all the information about chunks or
devices, but we want to warn and print at least something.
For non-root users, 'filesystem usage' prints only the overall stats and
warns about RAID5/6.
The sole cleanup changes affect mostly the modified code and the related
functions, should be reasonably small.
Signed-off-by: David Sterba <dsterba@suse.cz>
The device may not be fully occupied by the filesystem, the value of
Unallocated should not be calculated against the device size but the
size provided by DEV_INFO.
Signed-off-by: David Sterba <dsterba@suse.cz>
The entire device size may not be available to the filesystem, eg. if
it's modified via resize. Print this information if it can be obtained
from the DEV_INFO ioctl.
Print the device ID on the same line as the device name and move size to
the next line.
Sample:
/dev/sda7, ID: 3
Device size: 10.00GiB
FS occupied: 5.00GiB
Data,RAID10: 512.00MiB
Metadata,RAID10: 512.00MiB
System,RAID10: 4.00MiB
Unallocated: 9.00GiB
Signed-off-by: David Sterba <dsterba@suse.cz>
Move the command definitions where they belong, keep common 'usage'
functions in cmds-fi-disk_usage.c and add exports.
Rename structures containing 'disk' to 'device'.
Fix whitespace in the modified code.
Signed-off-by: David Sterba <dsterba@suse.cz>
When using lvm volumes to check fstests: btrfs/006, it fails like:
Label: 'TestLabel.006' uuid: <UUID>
Total devices <EXACTNUM> FS bytes used <SIZE>
devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV
+ devid <DEVID> size <SIZE> used <SIZE> path /dev/dm-4
+ devid <DEVID> size <SIZE> used <SIZE> path /dev/dm-5
+ devid <DEVID> size <SIZE> used <SIZE> path /dev/dm-6
The /dev/dm-* points to lvm volumes, use @canonicalize_path() to convert them
and we will make it through. Of course we should do the same thing for dev stat.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_scan_lblikd() is called by most the device related command functions.
And btrfs_scan_lblkid() is most expensive function and it becomes more expensive
as number of devices in the system increase. Further some threads call this
function more than once for absolutely no extra benefit and the real waste of
resources. Below list of threads and number of times btrfs_scan_lblkid()
is called in that thread.
btrfs-find-root 1
btrfs rescue super-recover 2
btrfs-debug-tree 1
btrfs-image -r 2
btrfs check 2
btrfs restore 2
calc-size NC
btrfs-corrupt-block NC
btrfs-image NC
btrfs-map-logical 1
btrfs-select-super NC
btrfstune 2
btrfs-zero-log NC
tester NC
quick-test.c NC
btrfs-convert 0
mkfs #number of devices to be mkfs
btrfs label set unmounted 2
btrfs get label unmounted 2
This patch will:
move out calling register_one_device with in btrfs_scan_lblkid()
and so function setting the BTRFS_UPDATE_KERNEL to yes will
call btrfs_register_all_devices() separately.
introduce a global variable scan_done, which is set when scan is
done succssfully per thread. So that following calls to this function
will just return success.
Further if any function needs to force scan after scan_done is set,
then it can be done when there is such a requirement, but as of now there
isn't any such requirement.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
cmd_scan_dev() has it own code to register device (calling ioctl
BTRFS_IOC_SCAN_DEV), apparently it could use btrfs_register_one_device().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The libblkid scan method which was introduced later, will also
scan devices under /proc/partitions. So we don't have to do
the explicit scan of the same.
Remove the scan method BTRFS_SCAN_PROC.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We can scan for btrfs devices in a few ways. By default
libblkid is used for "device scan" and "filesystem show";
with the -m option only mounted filesystems are scanned,
and with -d we physically read every system device.
But there's no reason for the complexity of a descent through
/dev; /proc/partitions has every device known to the kernel, so
just use that when -d is specified.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Fix (at least one user-visible) typos: it's its, not it's.
Signed-off-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
mount(8) will canonicalize pathnames before passing them to the kernel.
Links to e.g. /dev/sda will be resolved to /dev/sda. Links to /dev/dm-#
will be resolved using the name of the device mapper table to
/dev/mapper/<name>.
Btrfs will use whatever name the user passes to it, regardless of whether
it is canonical or not. That means that if a 'btrfs device ready' is
issued on any device node pointing to the original device, it will adopt
the new name instead of the name that was used during mount.
Mounting using /dev/sdb2 will result in df:
/dev/sdb2 209715200 39328 207577088 1% /mnt
lrwxrwxrwx 1 root root 4 Jun 4 13:36 /dev/whatever-i-like -> sdb2
/dev/whatever-i-like 209715200 39328 207577088 1% /mnt
Likewise, mounting with /dev/mapper/whatever and using /dev/dm-0 with a
btrfs device command results in df showing /dev/dm-0. This can happen with
multipath devices with friendly names enabled and doing something like
'partprobe' which (at least with our version) ends up issuing a 'change'
uevent on the sysfs node. That *always* uses the dm-# name, and we get
confused users.
This patch does the same canonicalization of the paths that mount does
so that we don't end up having inconsistent names reported by ->show_devices
later.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[use PATH_MAX in canonicalize_dm_name]
Signed-off-by: David Sterba <dsterba@suse.cz>
open_path_or_dev_mnt() is used to on *mounted* btrfs device or mount
point, when a unmounted btrfs device is passed, errno is set to EINVAL to
info the caller.
If ignore the errno and just print "ERROR: can't access '%s'", end users
will get confused.
This patch will add check for open_path_or_dev_mnt() caller and print
more meaningful error message when a unmounted btrfs device path is
given.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Help string of "btrfs dev scan" is inconsistent with man page,
which lacks the fact that -d|--all-device is conflict with <device>.
This patch fixes the description
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
1. Use long option to replace the original strcmp() to parse
the "--all-devices".
2. the "int ret" is defined in 2 places, just define it once
and make the return pattern into "goto + single return".
This does not change the actual scan procedure and return values.
Just make it clear, the original seems a little confusing.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
1. use usage() to replace the fprintf()
2. use check_argc_exact() to replace "argc != ..."
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Remove the extraneous `to' from `Can't access to X'.
Signed-off-by: Mitchel Humpherys <mitch.special@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
this patch will handle the strerror reporting of the error instead of
printing errno, and also replaced the BUG_ON with the error handling
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Make sure we are a block device firstly, this can avoid some
unnecessary ioctls operations.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
I noticed xfstests was failing in a weird way but it was because our device add
was failing but not actually returning an error so we were failing further down
the test. Fix this by making sure we return an error if we fail the mkfs tests.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
with this patch, BTRFS_SCAN_LBLKID (which leverages lblkid
to look for btrfs disks) would be the default scan method
to look for the btrfs disks. And thus the output as seen
in the latest btrfs fi show and btrfs fi show -m for the
mounted disks will have the consistent disks path.
(it was inconsistent (across disks) because btrfs dev scan
provided a different path from the mount command eg. below)
devid 1 size 1.98GiB used 435.00MiB path /dev/mapper/mpatha
devid 2 size 2.00GiB used 415.00MiB path /dev/dm-1
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
as of now, when 'btrfs device add' adds a device it doesn't
check if the given device contains an existing FS. This
patch will change that to check the same. which when true
add will fail, and ask user to use -f option to overwrite.
further, since now we have test_dev_for_mkfs() function
to check if a disk can be used, so this patch will also
use this function to test the given device before adding.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
These were mostly in option structs but there were a few gross string
pointer arguments given as 0.
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This fixes all the instances of warnings that symbols declared in blocks
shadow symbols with the same name in surrounding scopes:
cmds-device.c:341:22: warning: symbol 'path' shadows an earlier one
cmds-device.c:285:14: originally declared here
I just renamed or removed the risky shadow symbols instead of pulling
their blocks out into functions.
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
__CHECKER__ is only for the type juggling used to tell sparse which
types need conversion between address spaces. It is not OK to use to
change the code that gets checked to avoid bugs elsewhere in the build
infrastructure. We want to check the code that builds when the checker
isn't enabled.
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
when user runs command btrfs dev del the raid requisite error if any
goes to the /var/log/messages, its not good idea to clutter messages
with these user (knowledge) errors, further user don't have to review
the system messages to know problem with the cli it should be dropped
to the user as part of the cli return.
to bring this feature created a set of the ERROR defined
BTRFS_ERROR_DEV* error codes and created their error string.
I expect this enum to be added with other error which we might
want to communicate to the user land
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
the dev scan to find btrfs is performed at two locations
all most the same way one at filesystem show and another
at device scan. They both follow the same steps. This
patch does not alter anything except that it brings these
two same logic into the function scan_for_btrfs so that
we can play tweaking it.
the patch which recommends to use /dev/mapper
will also need it
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
the btrfs device scan usage didnt publish --all-devices
option so add it
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
valgrind complains open_file_or_dir() causes a memory leak.That is because
if we open a directoy by opendir(), and then we should call closedir()
to free memory.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
(same as commit bb0eabc383)
There, 'char' is unsigned, so once assigned '-1' from getopt, it gets
the value 255. Then, it compared to '-1' gives false.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
get_fs_info() has been silently switching from a device to a mounted
path as needed; the caller's filehandle was unexpectedly closed &
reopened outside the caller's scope. Not so great.
The callers do want "fdmnt" to be the filehandle for the mount point
in all cases, though - the various ioctls act on this (not on an fd
for the device). But switching it in the local scope of get_fs_info
is incorrect; it just so happens that *usually* the fd number is
unchanged.
So - use the new helpers to detect when an argument is a block
device, and open the the mounted path more obviously / explicitly
for ioctl use, storing the filehandle in fdmnt.
Then, in get_fs_info, ignore the fd completely, and use the path on
the argument to determine if the caller wanted to act on just that
device, or on all devices for the filesystem.
Affects those commands which are documented to accept either
a block device or a path:
* btrfs device stats
* btrfs replace start
* btrfs scrub start
* btrfs scrub status
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
In the places where we copy a string into the name
member of btrfs_ioctl_vol_args or btrfs_ioctl_vol_args_v2,
we use strncopy (to not overflow the name array) and then
set the last position to the null character.
Howver, in both cases the arrays are defined with:
char name[MAX+1];
hence the last array position is name[MAX].
In most cases, we now insert the null at name[MAX-1]
which deprives us of one useful character.
Even the above isn't consistent through the code, so
make some helper code to make it simple, i.e.
strncpy_null(dest, src) which automatically does the
right thing based on the size of dest.
Thanks to Zach Brown for the macro suggestion.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Check for failure by testing for a negative file descriptor, not a
descriptor of 0. And if it failed we have nothing to close().
Signed-off-by: Zach Brown <zab@redhat.com>
"btrfs device stats" is used to retrieve and print the device stats.
"btrfs device stats -z" is used to atomically retrieve, reset and
print the stats.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Anand Jain
David Sterba
Goffredo Baroncelli
Gui Hecheng
Eric Sandeen
Holger Hoffstätte
Jeff Mahoney
Qu Wenruo
Mitchel Humpherys
Wang Shilong
Josef Bacik
Zach Brown
Stefan Behrens