Commit 8ef9313cf2 ("btrfs-progs: zoned: implement log-structured
superblock") changed to write BTRFS_SUPER_INFO_SIZE bytes to device.
The before num of bytes to be written is sectorsize.
It causes mkfs.btrfs failed on my 16k pagesize kvm:
$ /usr/bin/mkfs.btrfs -s 16k -f -mraid0 /dev/vdb2 /dev/vdb3
btrfs-progs v5.12
See http://btrfs.wiki.kernel.org for more information.
ERROR: superblock magic doesn't match
ERROR: superblock magic doesn't match
common/device-scan.c:195: btrfs_add_to_fsid: BUG_ON `ret != sectorsize`
triggered, value 1
/usr/bin/mkfs.btrfs(btrfs_add_to_fsid+0x274)[0xaaab4fe8a5fc]
/usr/bin/mkfs.btrfs(main+0x1188)[0xaaab4fe4dc8c]
/usr/lib/libc.so.6(__libc_start_main+0xe8)[0xffff7223c538]
/usr/bin/mkfs.btrfs(+0xc558)[0xaaab4fe4c558]
[1] 225842 abort (core dumped) /usr/bin/mkfs.btrfs -s 16k -f -mraid0
/dev/vdb2 /dev/vdb3
btrfs_add_to_fsid() now always calls sbwrite() to write
BTRFS_SUPER_INFO_SIZE bytes to device, so change condition of
the BUG_ON().
Also add comments for sbread() and sbwrite().
Signed-off-by: Su Yue <l@damenly.su>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a group of functions that are related to opening filesystem in
various modes, this can be moved to a separate file.
Signed-off-by: David Sterba <dsterba@suse.com>
Decrease dependency on system headers, remove where they're not needed
or became stale after code moved. The path-utils.h encapsulate path
operations so include linux/limits.h here, that's where PATH_MAX is
defined.
Signed-off-by: David Sterba <dsterba@suse.com>
Superblock (and its copies) is the only data structure in btrfs which has a
fixed location on a device. Since we cannot overwrite in a sequential write
required zone, we cannot place superblock in the zone. One easy solution
is limiting superblock and copies to be placed only in conventional zones.
However, this method has two downsides: one is reduced number of superblock
copies. The location of the second copy of superblock is 256GB, which is in
a sequential write required zone on typical devices in the market today.
So, the number of superblock and copies is limited to be two. Second
downside is that we cannot support devices which have no conventional zones
at all.
To solve these two problems, we employ superblock log writing. It uses two
adjacent zones as a circular buffer to write updated superblocks. Once the
first zone is filled up, start writing into the second one. Then, when
both zones are filled up and before starting to write to the first zone
again, reset the first zone.
We can determine the position of the latest superblock by reading write
pointer information from a device. One corner case is when both zones are
full. For this situation, we read out the last superblock of each zone, and
compare them to determine which zone is older.
The following zones are reserved as the circular buffer on ZONED btrfs.
- primary superblock: offset 0B (and the following zone)
- first copy: offset 512G (and the following zone)
- Second copy: offset 4T (4096G, and the following zone)
If these reserved zones are conventional, superblock is written fixed at
the start of the zone without logging.
Currently, superblock reading/writing is done by pread/pwrite. This
commit replace the call sites with sbread/sbwrite to wrap the functions.
For zoned btrfs, btrfs_sb_io which is called from sbread/sbwrite
reverses the IO position back to a mirror number, maps the mirror number
into the superblock logging position, and do the IO.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Get the zone information (number of zones and zone size) from all the
devices, if the volume contains a zoned block device. To avoid costly
run-time zone report commands to test the device zones type during block
allocation, it also records all the zone status (zone type, write
pointer position, etc.).
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Likewise in the kernel code, provide fs_info access from struct
btrfs_device. This will help to unify the code between the kernel and
the userland.
Since fs_info can be NULL at the time of btrfs_add_to_fsid(), let's use
btrfs_open_devices() to set fs_info to the devices.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_scan_devices() is being used by commands such as
'btrfs filesystem' and 'btrfs device', by having the verbose argument in
the btrfs_scan_devices() we can control which threads to print the
messages when verbose is enabled by the global option.
Add an option %verbose to btrfs_scan_devices().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's theoretically possible to add multiple devices with sizes that add up
to or exceed 16EiB. A file system will be created successfully but will
have a superblock with incorrect values for total_bytes and other fields.
Kernels up to v5.0 will crash when they encounter this scenario.
We need to check for overflow and reject the device if it would overflow.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1099147
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
