Add test case image for unaligned tree block ptr.
It should lead to BUG_ON in free_extent_buffer().
Reported-by: Lukas Lueg <lukas.lueg@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ added bko-NNN- prefix to the files ]
Signed-off-by: David Sterba <dsterba@suse.com>
Reported by Lukas and the same image from him.
DATA_RELOC tree's key type is modifed to CHUNK_ITEM, causing btrfsck
interpret it as CHUNK_ITEM and cause 0 num_stripes.
Add the image to fuzz-test.
Reported-by: Lukas Lueg <lukas.lueg@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ added bko-NNN- prefix to the files ]
Signed-off-by: David Sterba <dsterba@suse.com>
Old convert codes uses both 0400 permission and INODE_READONLY flag to
make the converted ext2 image readonly.
While new convert treat the inode just as normal inode, with no special
inode flag and uses 0600 permission.
This makes user able to modify converted image unintentionally and make
rollback fails.
This test case will test the regression.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If btrfs isn't in the path, this test will fail with:
[TEST/misc] 006-image-on-missing-device
failed: btrfs fi show /dev/loop0
test failed for case 006-image-on-missing-device
Makefile:226: recipe for target 'test-misc' failed
make: *** [test-misc] Error 1
Fix the test script by adding $TOP to the path.
Signed-off-by: Luis Henriques <henrix@camandro.org>
[ updated to full command names ]
Signed-off-by: David Sterba <dsterba@suse.com>
For ext* fs containing a large hole(larger than 128M), btrfs-convert
will only insert one 128M hole extent and skip the remaining.
This leads to discontinuous file extents.
Add test case for it, and since it's a pinpoint regression test case, no
combination of convert options nor checksum verification.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The usage of 'source' is a bashism, and '.' should be used instead. This
is causing fuzz-tests/001-simple-unmounted to fail in systems where
/bin/sh isn't bash:
[TEST/fuzz] 001-simple-unmounted
./test.sh: 5: ./test.sh: source: not found
./test.sh: 7: ./test.sh: setup_root_helper: not found
./test.sh: 8: ./test.sh: check_prereq: not found
./test.sh: 18: ./test.sh: check_all_images: not found
Since most (all?) tests actually use /bin/bash, change this test to use
bash too.
Signed-off-by: Luis Henriques <henrix@camandro.org>
Signed-off-by: David Sterba <dsterba@suse.com>
The extN filesystem type was lost when the separate tests were created
and we've been testing only ext2. The tests pass for ext3 and ext4
though.
Signed-off-by: David Sterba <dsterba@suse.com>
Add a wrapper that sets up environment the same way a test would use it.
Use it for quick prototyping or testing, the commands and output is
logged.
Signed-off-by: David Sterba <dsterba@suse.com>
Split the big function to several helpers so we can use them separately.
Add comments and do minor tweaks.
Signed-off-by: David Sterba <dsterba@suse.com>
We really use root only for mount/umount and access to the ext2_saved
image (that has 0600). Also switch to common variable so we can use
helpers.
Signed-off-by: David Sterba <dsterba@suse.com>
New convert introduced simpler chunk/extent allocation algorithm, at the
cost of complex backup superblock migration codes.
Use specially built ext2 images to test if btrfs-convert can convert and
rollback images without problem.
All these special ext2 image have blocks/holes across 2nd btrfs backup
superblock.
The naming of test image is like the following:
|<------superblock migration range----->|
64M 64M + 64K
|-Data--|-Data--|/Hole//|-Data--|/Hole//|-Data--|--Data--| = drdhdhdrd
These test cases should check all typical layouts and make sure new
convert works.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add support for custom convert test scripts, just like fsck tests.
Instead of generic convert tests, we need more specifically created images
for new convert tests.
This patch provide the needed infrastructure for later convert test
cases.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
New convert framework uses new and simpler chunk layout, while the cost
is the more complex superblock range migration logical, compared to old
convert.
Enhance the convert test script to create file which will takes up 2nd
backup superblock space, to ensure the superblock migration is working
as expected.
Suggested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some of the files might not end up in the checksum list because of
permissions. This is reported by md5sum as incorrectly formatted lines.
Signed-off-by: David Sterba <dsterba@suse.com>
In order to confirm that btrfsck supports to check a variety of
refs, add the
following cases:
* keyed_block_ref
* keyed_data_ref
* shared_block_ref
* shared_data_ref
* no_inline_ref (a extent item without inline ref)
* no_skinny_ref
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds 4 fuzz testing images, btrfsck either doesn't detect errors
in them or crashes immediately.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Test for "btrfs-progs: subvol sync: fix memory corruption, undersized
array", a lot of deleted subvolumes in the 'subvol sync' will not fit
into the array, should result in a glibc report.
Signed-off-by: David Sterba <dsterba@suse.com>
We use a device mapper device on top of a loop device, the change in
rotational status does not always propagate if change it at the loop
device sysfs node.
Signed-off-by: David Sterba <dsterba@suse.com>
Add regression test for btrfs-find-root gives empty result even the fs
is OK.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ enhanced test ]
Signed-off-by: David Sterba <dsterba@suse.com>
This commit extends the leaf corruption test to try to repair a file
linked from multiple directory. It stresses a case that some links to a
file is broken but others kept valid.
Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: David Sterba <dsterba@suse.com>
Catch a buggy condition fixed by "btrfs-progs: fsck: Fix a false alert
where extent record has wrong metadata flag"
Signed-off-by: David Sterba <dsterba@suse.com>
Create filesystem on a partitioned loop device, test for "btrfs-progs:
Fix partitioned loop devices resolving".
Signed-off-by: David Sterba <dsterba@suse.com>
A test for "btrfs-progs: mkfs: increase buffer size in is_ssd". Create a
device with a long name through loop device wrapped to a device mapper
linear device, switch it to the "ssd" mode status.
Signed-off-by: David Sterba <dsterba@suse.com>
With the rootdir option we try to guess the final size of the image and
fill it with zeros, preceded by truncation. After patch
"Btrfs-progs: Do not force mixed block group creation unless '-M' option
is specified"
the misc test 002 will fail, because of the non-mixed mode. I think we
should not touch the image size (no change for block devices) and try to
fit into whatever is provided by user.
Signed-off-by: David Sterba <dsterba@suse.com>
Mixed mode needs equal sectorsize and nodesize. This was fixed by
"Btrfs-progs: Prevent creation of filesystem with 'mixed bgs' and
having differing sectorsize and nodesize"
Signed-off-by: David Sterba <dsterba@suse.com>
No need to log expected failures to the terminal, the results file is
fine; pass the return value of the command.
Signed-off-by: David Sterba <dsterba@suse.com>
Add a way to wrap commands executed by the tests. This means the
common wrappers: run_check, run_check_stdout and run_mayfail , with the
exception of the use root_helper.
The contents of the shell variable INSTRUMENT are prepended to the
command, without quotes. Use with care.
Example: this has been tested with valgrind, the output goes to the
RESULTS file.
$ INSTRUMENT=valgrind make test-misc
Any use of root_helper/SUDO_HELPER will skip the instrumentation.
Signed-off-by: David Sterba <dsterba@suse.com>
We use setup_root_helper in some helpers to make sure that the sudo
helper is set up, and adding that to each test. Make the real test run
only once.
Signed-off-by: David Sterba <dsterba@suse.com>
Testcase for "Btrfs-progs: fix btrfs-convert rollback to check
ROOT_BACKREF", make sure we don't try a rollback if the ext2_subvol is
half-deleted.
Signed-off-by: David Sterba <dsterba@suse.com>
Set the variable TEST_LOG=tty (in the enviroment or as parameter to
make) to print commands executed by 'run_check' helpers to terminal (ie.
/dev/tty). This might be useful to see the test progress beside watching
the results file.
Signed-off-by: David Sterba <dsterba@suse.com>
002-bad-transid outout 'transid verify failed' message in screen
which is just a warning in btrfs-image in normal condition of this
test.
This patch move above warning into $RESULTS, to:
1: Avoid trouble screen output
2: Let user known detail if other error happened in btrfs-image
Before patch:
# ./fsck-tests.sh
[TEST] 001-bad-file-extent-bytenr
[TEST] 002-bad-transid
parent transid verify failed on 29360128 wanted 9 found 755944791
parent transid verify failed on 29360128 wanted 9 found 755944791
Ignoring transid failure
[TEST] 003-shift-offsets
[TEST] 004-no-dir-index
...
After patch:
# ./fsck-tests.sh
[TEST] 001-bad-file-extent-bytenr
[TEST] 002-bad-transid
[TEST] 003-shift-offsets
[TEST] 004-no-dir-index
...
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To check is btrfs-convert create bad filesystem with
leaf across stripes.
It is happened in progs version <=v4.1.2, and fixed by patch titled:
btrfs: convert: Avoid allocating metadata extent crossing stripe boundary
which was merged in v4.2.
Notice thar this testcase can not report error in old version of
btrfs-progs, because "btrfs check" can't check this type of error
in those version, but we have another testcase in fsck-tests, to
check is "btrfs check" support this check.
So, the above 2 testcase together can check leaf-crossing-stripes
bug in all versions.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
[renamed and other minor changes]
Signed-off-by: David Sterba <dsterba@suse.com>
To test if fsck can check detec "leaf crossing stripes".
This function was introduced from patch titled:
btrfs-progs: fsck: Check if a metadata tree block crossing stripe boundary
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
[renamed and other minor changes]
Signed-off-by: David Sterba <dsterba@suse.com>
Move code for extract image file to a function from check_all_images()
for common use, so caller can use this function to extrace single
image file.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
[minor reformatting and updates]
Signed-off-by: David Sterba <dsterba@suse.com>
To fix following bug:
# ./convert-tests.sh
[TEST] ext2 4k nodesize, btrfs defaults
failed: mount /root/btrfsprogs/tests/test.img /root/btrfsprogs/tests/mnt
# tail convert-tests-results.txt
...
############### mount /root/btrfsprogs/tests/test.img /root/btrfsprogs/tests/mnt
mount: /root/btrfsprogs/tests/test.img is not a block device (maybe try `-o loop'?)
failed: mount /root/btrfsprogs/tests/test.img /root/btrfsprogs/tests/mnt
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A collection of several images that were produced in a non-standard way
and cause various errors in check or image tools. They do not fit into
the fsck tests as we're not able to repair any of them, but the tools
should not crash or do out-of-bounds access.
Signed-off-by: David Sterba <dsterba@suse.com>
So this test can support both block device and loop device simply.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
mount command in old system can not add "-o loop" option automatically
for loop device, and make following test failed:
# ./fsck-tests.sh
...
[TEST] 013-extent-tree-rebuild
failed: mount /data/btrfsprogs/tests/test.img /data/btrfsprogs/tests/mnt
test failed for case 013-extent-tree-rebuild
Considering that $TEST_DEV can be block or loop device, we need determine
our mount option in a condition for both case.
This patch create a wrapper function for above request, to solve current
problem in 013-extent-tree-rebuild, and support similar request in future.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
mount command in old system can not add "-o loop" option automatically
for a loop device, and make following test 013-extent-tree-rebuild fail.
Considering that $TEST_DEV can be block or loop device, we need to determine
our mount option in a condition for both case.
Introduce a wrapper that will add the loop options if needed.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some test failed in my nfs dir:
...
[TEST] 006-bad-root-items
tar: test.img: Cannot change ownership to uid 1000, gid 1000: Invalid argument
tar: Exiting with failure status due to previous errors
failed to extract default_case.tar.xz
test failed for case 006-bad-root-items
It is because the image file's owner is:
# tar tvf default_case.tar.xz
-rw-r--r-- fdmanana/fdmanana 2147483648 2014-10-17 17:59 test.img
And make tar failed in chown in nfs.
It is not a big issue because we don't use nfs commonly, but extract
the image file with ownership of current user will be a better choice.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If a testcase failed, we can't run it(or other tests needs mount) again,
# ./misc-tests.sh 007
[TEST] 007-subvolume-sync
failed: fail
test failed for case 007-subvolume-sync
# ./misc-tests.sh 007
[TEST] 007-subvolume-sync
failed: mount /root/btrfs-progs/tests/test.img /root/btrfs-progs/tests/mnt
test failed for case 007-subvolume-sync
This patch add "umount $TEST_MNT" to clean-tests.sh, to let user
clean mountpoint easily.
After patch:
# ./misc-tests.sh 007
[TEST] 007-subvolume-sync
failed: fail
test failed for case 007-subvolume-sync
#
# clean-tests.sh
#
# ./misc-tests.sh 007
[TEST] 007-subvolume-sync
failed: fail
test failed for case 007-subvolume-sync
Suggested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
[added sudo helper to umount]
Signed-off-by: David Sterba <dsterba@suse.com>
For example, $TEST_DIR is common used in severial tests, and have
duplicated code for initialize.
These duplicated code not only benifits harddisk vendor, but have
inconsistent details, as:
convert-tests.sh: lack of mkdir
fsck-tests/012-leaf-corruption/test.sh: unnecessary mkdir
fsck-tests/013-extent-tree-rebuild/test.sh: unnecessary init
misc-tests/XXX ...
And severial error message:
_fail "unable to create mount point on $TEST_MNT"
_fail "failed to create mount point"
...
This patch move initizlizaton of $TEST_DIR to common init_env(),
to avoid above problem, and init_env() can be used to add more
things in future.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current code have following bug for subvolume sync:
1: If there are more than 1 subvolume to sync, the program will
infinitely loop.
2: return !0 in exit
This patch add misc-tests/007-subvolume-sync for above case.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Create a 2 device raid1 filesystem, fill with some data, delete one
device (the device node must not exist) and try to dump a filesystem
image.
Signed-off-by: David Sterba <dsterba@suse.com>
Add test case for inode with no file extents, but still non-zero size.
To test whether fsck will infinite loop.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current code of btrfs-convert have a bug of thread conflict, which caused
invalid memory accessing between threads, and make program panic.
This patch add a test item for above bug, as:
# ./misc-tests.sh
[TEST] 001-btrfstune-features
[TEST] 002-uuid-rewrite
[TEST] 003-zero-log
[TEST] 004-convert-thread-conflict
failed: btrfs-convert /root/btrfsprogs/tests/test.img
test failed for case 004-convert-thread-conflict
#
# cat misc-tests-results.txt
...
############### btrfs-convert /root/btrfsprogs/tests/test.img
trans 7 running 5
ctree.c:363: btrfs_cow_block: Assertion `1` failed.
btrfs-convert(btrfs_cow_block+0x92)[0x40acaf]
btrfs-convert(btrfs_search_slot+0x1cb)[0x40c50f]
btrfs-convert(btrfs_csum_file_block+0x20f)[0x41d83a]
btrfs-convert[0x43422d]
btrfs-convert[0x4342cd]
btrfs-convert[0x4345ca]
btrfs-convert[0x434767]
btrfs-convert[0x435770]
btrfs-convert[0x439748]
btrfs-convert(main+0x13f8)[0x43b09d]
/lib64/libc.so.6(__libc_start_main+0xfd)[0x335e01ecdd]
btrfs-convert[0x407649]
create btrfs filesystem:
blocksize: 4096
nodesize: 16384
features: extref, skinny-metadata (default)
creating btrfs metadata.
creating ext2fs image file.
failed: btrfs-convert /root/btrfsprogs/tests/test.img
test failed for case 004-convert-thread-conflict
#
Note that this bug is not happened every time, especilly in slow
device as loop(slow cpu with fast block device is likely to trigger).
I set loop count to 20 to make bug happened in 90% tests.
Suggested-by: David Sterba <dsterba@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This code block is used several tests, move it to ./common and add a
helper.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>