These are the printk helpers from the kernel. There were a few
modifications, the hi-lights are
- We do not have fs_info::fs_state, so that needed to be removed.
- We do not have discard.h sync'ed yet, so that dependency was dropped.
- Anything related to struct super_block was commented out.
- The transaction abort had to be modified to fit with the current
btrfs-progs code.
- Added a btrfs_no_printk() helper to common/messages.* so that the
print statements still worked.
- The 32bit limit checkers are not needed so are behind __KERNEL__
Additionally there were kerncompat.h changes that needed to be made to
handle the dependencies properly. Those are easier to spot.
Any function that needed to be modified has a MODIFIED tag in the
comment section with a list of things that were changed.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The *64 interfaces, such as fstat64, off64_t, etc, are legacy interfaces
created at a time when 64-bit file support was still new. They are
generally exposed when defining a macro named _LARGEFILE64_SOURCE, as
e.g. the glibc docs[0] say.
The modern way to utilise largefile support, is to continue to use the
regular interfaces (off_t, fstat, ..), and define _FILE_OFFSET_BITS=64.
We already use the autoconf macro AC_SYS_LARGEFILE[1] which arranges this
and sets this macro for us. Therefore, we can utilise the non-64 names
without fear of breaking on 32-bit systems.
This fixes the build against musl libc, ever since musl dropped the
*64 compat from interfaces by default[2] just for _GNU_SOURCE, unless
_LARGEFILE64_SOURCE is defined. However, there are plans for a future
removal of the whole *64 header API, and that workaround (adding another
define) might cease to exist.
So, rename all *64 API use to the regular non-suffixed names. For
consistency, rename the internal functions that were *64 named
(lstat64_path, ..) too.
This should have no regressions on any platform.
[0]: https://www.gnu.org/software/libc/manual/html_node/Feature-Test-Macros.html#index-_005fLARGEFILE64_005fSOURCE
[1]: https://www.gnu.org/software/autoconf/manual/autoconf-2.67/html_node/System-Services.html
[2]: 25e6fee27f
Pull-request: #615
Signed-off-by: psykose <alice@ayaya.dev>
Signed-off-by: David Sterba <dsterba@suse.com>
Move sb_zone_number() and related constants from zoned.c to the
corresponding header for later use.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In commit 88895a920f ("btrfs-progs: use profile_supported in mkfs as
well") there's a wrapper but not available on non-zoned builds. Add it.
Issue: #445
Signed-off-by: David Sterba <dsterba@suse.com>
Pass BTRFS_BLOCK_GROUP_DATA and BTRFS_BLOCK_GROUP_METADATA to
zoned_profile_supported(), so we can actually distinguish if it is a data
or a meta-data block group.
Fixes: 8f914d518a46 ("btrfs-progs: zoned support DUP on metadata block groups")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we have two places checking if a block-group profile is
supported on a zoned device, one in mkfs/main.c and one in
kernel-shared/zoned.c.
Use the one from kernel-shared/zoned.c in mkfs as well, unifying all
checks.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
max_zone_append_size is unused and can as well be removed just like we
did on the kernel side.
Keep one sanity check though, so we're not adding devices to a zoned FS
that aren't supporting zone append.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot zone reset a regular file with emulated zones. So, mkfs.btrfs
on such a file causes the following error.
ERROR: zoned: failed to reset device '/home/naota/tmp/btrfs.img' zones: Inappropriate ioctl for device
Introduce btrfs_zoned_device_info->emulated to distinguish the zones are
emulated or not. And, use it to decide it needs zone reset or not.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the GPL v2 header to files where it was missing and is not from an
external source, update to the most recent version with the address.
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 8ef9313cf2 ("btrfs-progs: zoned: implement log-structured
superblock") changed to write BTRFS_SUPER_INFO_SIZE bytes to device.
The before num of bytes to be written is sectorsize.
It causes mkfs.btrfs failed on my 16k pagesize kvm:
$ /usr/bin/mkfs.btrfs -s 16k -f -mraid0 /dev/vdb2 /dev/vdb3
btrfs-progs v5.12
See http://btrfs.wiki.kernel.org for more information.
ERROR: superblock magic doesn't match
ERROR: superblock magic doesn't match
common/device-scan.c:195: btrfs_add_to_fsid: BUG_ON `ret != sectorsize`
triggered, value 1
/usr/bin/mkfs.btrfs(btrfs_add_to_fsid+0x274)[0xaaab4fe8a5fc]
/usr/bin/mkfs.btrfs(main+0x1188)[0xaaab4fe4dc8c]
/usr/lib/libc.so.6(__libc_start_main+0xe8)[0xffff7223c538]
/usr/bin/mkfs.btrfs(+0xc558)[0xaaab4fe4c558]
[1] 225842 abort (core dumped) /usr/bin/mkfs.btrfs -s 16k -f -mraid0
/dev/vdb2 /dev/vdb3
btrfs_add_to_fsid() now always calls sbwrite() to write
BTRFS_SUPER_INFO_SIZE bytes to device, so change condition of
the BUG_ON().
Also add comments for sbread() and sbwrite().
Signed-off-by: Su Yue <l@damenly.su>
Signed-off-by: David Sterba <dsterba@suse.com>
mkfs.btrfs uses a temporary superblock during the initialization process.
The temporary superblock uses BTRFS_MAGIC_TEMPORARY as its magic which is
different from a regular superblock. As a result, libblkid, which only
supports the usual magic, cannot recognize the volume as btrfs. So, let's
wipe the temporary magic before writing out the usual superblock.
Technically, we can add the temporary magic to the libblkid's table. But,
it will result in recognizing a half-baked filesystem as btrfs, which is
not ideal.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we zero out a region in a sequential write required zone, we cannot
write to the region until we reset the zone. Thus, we must prohibit zeroing
out to a sequential write required zone.
zero_dev_clamped() is modified to take the zone information and it calls
zero_zone_blocks() if the device is host managed to avoid writing to
sequential write required zones.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All zones of zoned block devices should be reset before writing. Support
this by introducing PREP_DEVICE_ZONED.
btrfs_reset_all_zones() walk all the zones on a device, and reset a zone if
it is sequential required zone, or discard the zone range otherwise.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When freeing a chunk, we can/should reset the underlying device zones
for the chunk. Introduce btrfs_reset_chunk_zones() and reset the zones.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Tree manipulating operations like merging nodes often release
once-allocated tree nodes. Btrfs cleans such nodes so that pages in the
node are not uselessly written out. On ZONED drives, however, such
optimization blocks the following IOs as the cancellation of the write
out of the freed blocks breaks the sequential write sequence expected by
the device.
Check if next dirty extent buffer is continuous to a previously written
one. If not, it redirty extent buffers between the previous one and the
next one, so that all dirty buffers are written sequentially.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A zoned filesystem must allocate blocks at the zones' write pointer. The
device's write pointer position can be mapped to a logical address
within a block group. To facilitate this, add an "alloc_offset" to the
block group to track the logical addresses of the write pointer.
This logical address is populated in btrfs_load_block_group_zone_info()
from the write pointers of corresponding zones.
For now, zoned filesystems the single profile. Supporting non-single
profile with zone append writing is not trivial. For example, in the DUP
profile, we send a zone append writing IO to two zones on a device. The
device reply with written LBAs for the IOs. If the offsets of the
returned addresses from the beginning of the zone are different, then it
results in different logical addresses.
We need fine-grained logical to physical mapping to support such
separated physical address issue. Since it should require additional
metadata type, disable non-single profiles for now.
This commit supports the case all the zones in a block group are
sequential. The next patch will handle the case having a conventional
zone.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Implement a zoned chunk and device extent allocator. One device zone
becomes a device extent so that a zone reset affects only this device
extent and does not change the state of blocks in the neighbor device
extents.
To implement the allocator, we need to extend the following functions for
a zoned filesystem:
- init_alloc_chunk_ctl
- dev_extent_search_start
- dev_extent_hole_check
- decide_stripe_size
Here, dev_extent_hole_check() is newly introduced to check the validity of
a hole found.
init_alloc_chunk_ctl_zoned() is mostly the same as regular one. It always
set the stripe_size to the zone size and aligns the parameters to the zone
size.
dev_extent_search_start() only aligns the start offset to zone boundaries.
We don't care about the first 1MB like in regular filesystem because we
anyway reserve the first two zones for superblock logging.
dev_extent_hole_check_zoned() checks if zones in given hole are either
conventional or empty sequential zones. Also, it skips zones reserved for
superblock logging.
With the change to the hole, the new hole may now contain pending extents.
So, in this case, loop again to check that.
Finally, decide_stripe_size_zoned() should shrink the number of devices
instead of stripe size because we need to honor stripe_size == zone_size.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Superblock (and its copies) is the only data structure in btrfs which has a
fixed location on a device. Since we cannot overwrite in a sequential write
required zone, we cannot place superblock in the zone. One easy solution
is limiting superblock and copies to be placed only in conventional zones.
However, this method has two downsides: one is reduced number of superblock
copies. The location of the second copy of superblock is 256GB, which is in
a sequential write required zone on typical devices in the market today.
So, the number of superblock and copies is limited to be two. Second
downside is that we cannot support devices which have no conventional zones
at all.
To solve these two problems, we employ superblock log writing. It uses two
adjacent zones as a circular buffer to write updated superblocks. Once the
first zone is filled up, start writing into the second one. Then, when
both zones are filled up and before starting to write to the first zone
again, reset the first zone.
We can determine the position of the latest superblock by reading write
pointer information from a device. One corner case is when both zones are
full. For this situation, we read out the last superblock of each zone, and
compare them to determine which zone is older.
The following zones are reserved as the circular buffer on ZONED btrfs.
- primary superblock: offset 0B (and the following zone)
- first copy: offset 512G (and the following zone)
- Second copy: offset 4T (4096G, and the following zone)
If these reserved zones are conventional, superblock is written fixed at
the start of the zone without logging.
Currently, superblock reading/writing is done by pread/pwrite. This
commit replace the call sites with sbread/sbwrite to wrap the functions.
For zoned btrfs, btrfs_sb_io which is called from sbread/sbwrite
reverses the IO position back to a mirror number, maps the mirror number
into the superblock logging position, and do the IO.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The zone append write command has a maximum IO size restriction it
accepts. This is because a zone append write command cannot be split, as
we ask the device to place the data into a specific target zone and the
device responds with the actual written location of the data.
Introduce max_zone_append_size to zone_info and fs_info to track the
value, so we can limit all I/O to a zoned block device that we want to
write using the zone append command to the device's limits.
Zone append command is mandatory for zoned btrfs. So, reject a device
with max_zone_append_size == 0.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce function btrfs_check_zoned_mode() to check if ZONED flag is
enabled on the file system and if the file system consists of zoned
devices with equal zone size.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Get the zone information (number of zones and zone size) from all the
devices, if the volume contains a zoned block device. To avoid costly
run-time zone report commands to test the device zones type during block
allocation, it also records all the zone status (zone type, write
pointer position, etc.).
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik
psykose
Naohiro Aota
David Sterba
Johannes Thumshirn
Su Yue