This file includes linux/fs.h which includes linux/mount.h and with
glibc 2.36 linux/mount.h and glibc mount.h are not compatible [1]
therefore try to avoid including both headers
[1] https://sourceware.org/glibc/wiki/Release/2.36
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
mkfs.btrfs v5.15 outputs a message even if the disk is a HDD without
TRIM/DISCARD support:
Performing full device TRIM /dev/sdc2 (326.03GiB) ...
[CAUSE]
mkfs.btrfs check TRIM/DISCARD support through the content of
queue/discard_granularity, but compare it against a wrong value.
When HDD without TRIM/DISCARD support, the content of
queue/discard_granularity is '0' '\n' '\0', rather than '0' '\0'.
[FIX]
- compare the value based on atoi() to provide more robustness
- delete unnecessary '\n' in pr_verbose()
Fixes: c50c448518 ("btrfs-progs: do sysfs detection of device discard capability")
Signed-off-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Wrap pwrite with btrfs_pwrite(). It simply calls pwrite() on non-zoned
btrfs (opened without O_DIRECT). On zoned mode (opened with O_DIRECT),
it allocates an aligned bounce buffer, copies the contents and uses it
for direct-IO writing.
Writes in device_zero_blocks() and btrfs_wipe_existing_sb() are a little
tricky. We don't have fs_info on our hands, so use zinfo to determine it
is a zoned device or not.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The detection of the discard status of a device is done by issuing a
real discard request but on an empty range. This works in most cases.
However there's a case of a VirtualBox driver that returns 'Operation
not supported' in that case, and then discard is skipped during mkfs.
The other tools like fstrim check the sysfs queue file
discard_granularity which is the recommended way. Do that as well.
Issue: #390
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot zone reset a regular file with emulated zones. So, mkfs.btrfs
on such a file causes the following error.
ERROR: zoned: failed to reset device '/home/naota/tmp/btrfs.img' zones: Inappropriate ioctl for device
Introduce btrfs_zoned_device_info->emulated to distinguish the zones are
emulated or not. And, use it to decide it needs zone reset or not.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reading partition size using an ioctl requires the device open, but that
does not work for unprivileged users. This leads to 0 size in device
info structures filled by device_get_partition_size.
As a consequence, this also misreports such devices as missing in 'fi
us' overview:
$ btrfs fi us /
WARNING: cannot read detailed chunk info, per-device usage will not be shown, run as root
Overall:
Device size: 411.35GiB
Device allocated: 53.01GiB
Device unallocated: 358.34GiB
Device missing: 411.35GiB
Used: 31.99GiB
Free (estimated): 379.16GiB (min: 379.16GiB)
Free (statfs, df): 379.35GiB
Data ratio: 1.00
Metadata ratio: 1.00
Global reserve: 194.77MiB (used: 0.00B)
Multiple profiles: no
There should be 0 for 'Device missing'.
Add a fallback to read the device size from sysfs in case the ioctl is
not available.
Issue: #395
Signed-off-by: David Sterba <dsterba@suse.com>
Sysfs hides the zone size of a block device in the queue/chunk_sectors
file, so add a helper that will read it for us when given the short
device name (that can be found in FSID/devices).
Signed-off-by: David Sterba <dsterba@suse.com>
Getting the per bg type zone unusable space will be used in other size
reports like 'fi us', so export it to the device utils.
Signed-off-by: David Sterba <dsterba@suse.com>
The helper wraps a raw ioctl but some users may already have the fd and
not necessarily the path. Add a suitable helper for convenience.
Signed-off-by: David Sterba <dsterba@suse.com>
This helper hasn't been used since 63bbf2931d ("btrfs-progs: rework
calculations of fi usage") a few years ago and we don't need the statfs
based calculations anywhere.
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot overwrite superblock magic in a sequential required zone.
Instead, we can reset the zone to wipe it.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we zero out a region in a sequential write required zone, we cannot
write to the region until we reset the zone. Thus, we must prohibit zeroing
out to a sequential write required zone.
zero_dev_clamped() is modified to take the zone information and it calls
zero_zone_blocks() if the device is host managed to avoid writing to
sequential write required zones.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All zones of zoned block devices should be reset before writing. Support
this by introducing PREP_DEVICE_ZONED.
btrfs_reset_all_zones() walk all the zones on a device, and reset a zone if
it is sequential required zone, or discard the zone range otherwise.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce the queue_param helper function to get a device request queue
parameter. This helper will be used later to query information of a zoned
device.
Furthermore, rewrite is_ssd() using the helper function.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[Naohiro] fixed error return value
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
