The single profile is better suited as default for data on multiple
devices. Switch from RAID0 because:
- it's easier to convert to other profiles, as single consumes some
chunks per device, but RAID0 has chunks on all devices regardless of
the used space
- RAID0 has no redundancy and compared one disk failure affects many
files due to striping, while with single the chances are a bit higher
that complete files are stored on one device
- when the device sizes are not equal and not even close to equal, the
maximum achievable size with RAID0 is size of the smallest device due
to striping, with single it's the sum of all device sizes
The changed defaults could affect scripts and deployments that rely on
the old values, but given the number of possible profiles for multiple
devices let's hope that they're specified explicitly in majority of
cases.
Issue: #270
Signed-off-by: David Sterba <dsterba@suse.com>
Extract the defaults for data and metadata profiles to a header and
use the symbolic names instead of hardcoding the profiles.
Signed-off-by: David Sterba <dsterba@suse.com>
The option -A was used long time ago for debugging and marked as
obsolete since 4.14.1. Remove the option and set the alloc start to the
default value 1MiB.
Signed-off-by: David Sterba <dsterba@suse.com>
Add support for enabling quotas at mkfs time. The qgroup accounting will
be consistent, ie. works with --rootdir.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just like -O|--features, introduce -R|--runtime-features to enable
features that are now enabled on a mounted filesystem
Currently only mkfs is supported, convert is not supported yet.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make the features structures more generic to allow mkfs-time and
mount-time sets to be defined.
This provides base for later mkfs support of mount-time features like
quotas.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new function, setup_quota_root(), which will create quota
root, and do an offline rescan to ensure all quota accounting numbers
are correct.
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ minor improvement in the fail path ]
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new function, insert_qgroup_items(), to insert qgroup info
item and qgroup limit item for later mkfs qgroup support.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To sync with the refactored kernel code. Also since we're here, sync
the function parameters with kernel too.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This would sync the code between kernel and btrfs-progs, and save at
least 1 byte for each btrfs_block_group_cache.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add definition, crypto wrappers and support to mkfs for blake2 for
checksumming. There are 2 aliases either blake2 or blake2b.
Signed-off-by: David Sterba <dsterba@suse.com>
Add the definition to the checksum types and let mkfs accept it.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
With the introduction of xxhash64 to btrfs-progs we created a crypto/
directory for all the hashes used in btrfs (although no
cryptographically secure hash is there yet).
Move the crc32c implementation from kernel-lib/ to crypto/ as well so we
have all hashes consolidated.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
As mkfs will grow new checksums, print the used checksum in it's
versbose output.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Adding this table will make extending btrfs-progs with new checksum types
easier.
Also add accessor functions to access the table fields.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add an option to mkfs to specify which checksum algorithm will be used
for the filesystem. Currently only crc32c is supported.
The option name is -c, presumably one of the comonly used options so it
gets the lowercase option.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the checksum type to csum_tree_block_size(), __csum_tree_block_size()
and verify_tree_block_csum_silent().
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The callers of csum_tree_block_size() blindly assume we're only having
crc32c as a possible checksum and thus pass in
btrfs_csum_sizes[BTRFS_CSUM_TYPE_CRC32] for the size argument of
csum_tree_block_size().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add checksum type to the definition structure for a new filesystem, this
will be used in following patches.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the return value of listxattr instead of tokenizing.
The end of the extended attribute list is indicated by the return value,
not an empty list item (two consecutive NULs). Using strtok in this way
thus sometimes caused add_xattr_item to reuse stack data in xattr_list
from the previous invocation, thus querying attributes that are not
actually in the file's xattr list.
Issue: #194
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Vladimir Panteleev <git@vladimir.panteleev.md>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs_add_to_fsid fails in mkfs we try to close the ctree. That
complains that we already have a transaction open. We should be taking
the error path and exit cleanly without writing.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When creating a filesystem with mixed block groups, we are creating two
space info objects to track used/reserved/pinned space, one only for data
and another one only for metadata.
This is making fstests test case generic/416 fail, with btrfs' check
reporting over an hundred errors about bad extents:
(...)
bad extent [17186816, 17190912), type mismatch with chunk
bad extent [17195008, 17199104), type mismatch with chunk
bad extent [17203200, 17207296), type mismatch with chunk
(...)
Because, surprisingly, this results in block groups that do not have the
BTRFS_BLOCK_GROUP_DATA flag set but have data extents allocated in them.
This is a regression introduced in btrfs-progs v5.2.
So fix this by making sure we only create one space info object, for both
metadata and data, when mixed block groups are enabled.
Fixes: c31edf610c ("btrfs-progs: Fix false ENOSPC alert by tracking used space correctly")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Build several standalone tools into one binary and switch the function
by name (symlink or hardlink).
* btrfs
* mkfs.btrfs
* btrfs-image
* btrfs-convert
* btrfstune
The static target is also supported. The name of resulting boxed
binaries is btrfs.box and btrfs.box.static . All the binaries can be
built at the same time without prior configuration.
text data bss dec hex filename
822454 27000 19724 869178 d433a btrfs
927314 28816 20812 976942 ee82e btrfs.box
2067745 58004 44736 2170485 211e75 btrfs.static
2627198 61724 83800 2772722 2a4ef2 btrfs.box.static
File sizes:
857496 btrfs
968536 btrfs.box
2141400 btrfs.static
2704472 btrfs.box.static
Standalone utilities:
512504 btrfs-convert
495960 btrfs-image
471224 btrfstune
491864 mkfs.btrfs
1747720 btrfs-convert.static
1411416 btrfs-image.static
1304256 btrfstune.static
1361696 mkfs.btrfs.static
So the shared 900K binary saves ~2M, or ~5.7M for static build.
Signed-off-by: David Sterba <dsterba@suse.cz>
Create directory for all sources that can be used by anything that's not
rellated to a relevant kernel part, all common functions, helpers,
utilities that do not fit any other specific category.
The traditional location would be probably lib/ with all things that are
statically linked to the main binaries, but we have libbtrfs and
libbtrfsutil so this would be confusing.
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a bug report of unexpected ENOSPC from btrfs-convert, issue #123.
After some debugging, even when we have enough unallocated space, we
still hit ENOSPC at btrfs_reserve_extent().
[CAUSE]
Btrfs-progs relies on chunk preallocator to make enough space for
data/metadata.
However after the introduction of delayed-ref, it's no longer reliable
to rely on btrfs_space_info::bytes_used and
btrfs_space_info::bytes_pinned to calculate used metadata space.
For a running transaction with a lot of allocated tree blocks,
btrfs_space_info::bytes_used stays its original value, and will only be
updated when running delayed ref.
This makes btrfs-progs chunk preallocator completely useless. And for
btrfs-convert/mkfs.btrfs --rootdir, if we're going to have enough
metadata to fill a metadata block group in one transaction, we will hit
ENOSPC no matter whether we have enough unallocated space.
[FIX]
This patch will introduce btrfs_space_info::bytes_reserved to track how
many space we have reserved but not yet committed to extent tree.
To support this change, this commit also introduces the following
modification:
- More comment on btrfs_space_info::bytes_*
To make code a little easier to read
- Export update_space_info() to preallocate empty data/metadata space
info for mkfs.
For mkfs, we only have a temporary fs image with SYSTEM chunk only.
Export update_space_info() so that we can preallocate empty
data/metadata space info before we start a transaction.
- Proper btrfs_space_info::bytes_reserved update
The timing is the as kernel (except we don't need to update
bytes_reserved for data extents)
* Increase bytes_reserved when call alloc_reserved_tree_block()
* Decrease bytes_reserved when running delayed refs
With the help of head->must_insert_reserved to determine whether we
need to decrease.
Issue: #123
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although moderm hardware is fast enough and crc32c calculation is not a
hotspot, doing such optimization won't hurt anyway.
Issue: #175
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
