RepoMirrors/btrfs-progs
1
0
Fork 0
mirror of https://github.com/kdave/btrfs-progs synced 2025-04-26 04:57:57 +00:00
Code Issues Packages Projects Releases Wiki Activity

btrfs-progs: docs: update documentation

Browse Source 
Signed-off-by: David Sterba <dsterba@suse.com>
This commit is contained in:
David Sterba 2025-01-17 01:44:26 +01:00
parent abad680f5f
commit a743144263
2 changed files with 62 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Documentation/btrfs-rescue.rst
View File

@ -65,14 +65,17 @@ clear-space-cache <v1|v2> <device>
remove the cache for updated block groups, the remaining would not be removed.
Thus this command is provided to manually clear the free space cache.
.. _man-rescue-clear-uuid-tree:
clear-uuid-tree <device>
Clear UUID tree, so that kernel can re-generate it at next read-write
Clear the UUID tree, so that kernel can regenerate it at next read-write
mount.
Since kernel v4.16 there are more sanity check performed, and sometimes
non-critical trees like UUID tree can cause problems and reject the mount.
In such case, clearing UUID tree may make the filesystem to be mountable again
without much risk as it's built from other trees.
See also :docref:`mount option rescan_uuid_tree <btrfs-man5:mount-option-rescan-uuid-tree>`.
super-recover [options] <device>
Recover bad superblocks from good copies.

95
Documentation/ch-mount-options.rst
View File

@ -2,8 +2,9 @@ BTRFS SPECIFIC MOUNT OPTIONS
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This section describes mount options specific to BTRFS. For the generic mount
options please refer to :manref:`mount(8)` manual page. The options are sorted alphabetically
(discarding the *no* prefix).
options please refer to :manref:`mount(8)` manual page and also see the section
with BTRFS specifics :docref:`below<btrfs-man5:mount-options-generic>`. The options are
sorted alphabetically (discarding the *no* prefix).
.. note::
Most mount options apply to the whole filesystem and only options in the
@ -69,27 +70,6 @@ barrier, nobarrier
option will not lead to filesystem corruption as the pending blocks are
supposed to make it to the permanent storage.
check_int, check_int_data, check_int_print_mask=<value>
(since: 3.0, default: off)
These debugging options control the behavior of the integrity checking
module (the BTRFS_FS_CHECK_INTEGRITY config option required). The main goal is
to verify that all blocks from a given transaction period are properly linked.
*check_int* enables the integrity checker module, which examines all
block write requests to ensure on-disk consistency, at a large
memory and CPU cost.
*check_int_data* includes extent data in the integrity checks, and
implies the *check_int* option.
*check_int_print_mask* takes a bitmask of BTRFSIC_PRINT_MASK_* values
as defined in *fs/btrfs/check-integrity.c*, to control the integrity
checker module behavior.
See comments at the top of *fs/btrfs/check-integrity.c*
for more information.
clear_cache
Force clearing and rebuilding of the free space cache if something
has gone wrong.
@ -110,9 +90,14 @@ commit=<seconds>
Set the interval of periodic transaction commit when data are synchronized
to permanent storage. Higher interval values lead to larger amount of unwritten
data, which has obvious consequences when the system crashes.
The upper bound is not forced, but a warning is printed if it's more than 300
seconds (5 minutes). Use with care.
data to accumulate in memory, which has obvious consequences when the
system crashes. The upper bound is not forced, but a warning is
printed if it's more than 300 seconds (5 minutes). Use with care.
The periodic commit is not the only mechanism to do the transaction commit,
this can also happen by explicit :command:`sync` or indirectly by other
commands that affect the global filesystem state or internal kernel
mechanisms that flush based on various thresholds or policies (e.g. cgroups).
compress, compress=<type[:level]>, compress-force, compress-force=<type[:level]>
(default: off, level support since: 5.1)
@ -210,14 +195,14 @@ device=<devicepath>
discard, discard=sync, discard=async, nodiscard
(default: async when devices support it since 6.2, async support since: 5.6)
Enable discarding of freed file blocks. This is useful for SSD devices, thinly
provisioned LUNs, or virtual machine images; however, every storage layer must
support discard for it to work.
Enable discarding of freed file blocks. This is useful for SSD/NVMe
devices, thinly provisioned LUNs, or virtual machine images; however,
every storage layer must support discard for it to work.
In the synchronous mode (*sync* or without option value), lack of asynchronous
queued TRIM on the backing device TRIM can severely degrade performance,
because a synchronous TRIM operation will be attempted instead. Queued TRIM
requires newer than SATA revision 3.1 chipsets and devices.
requires SATA devices with chipsets revision newer than 3.1 and devices.
The asynchronous mode (*async*) gathers extents in larger chunks before sending
them to the devices for TRIM. The overhead and performance impact should be
@ -319,24 +304,30 @@ norecovery
and avoids other write operations. Note that this option is the same as
*nologreplay*.
.. note::
The opposite option *recovery* used to have different meaning but was
changed for consistency with other filesystems, where *norecovery* is used for
skipping log replay. BTRFS does the same and in general will try to avoid any
write operations.
.. duplabel:: mount-option-rescan-uuid-tree
rescan_uuid_tree
(since: 3.12, default: off)
Force check and rebuild procedure of the UUID tree. This should not
normally be needed.
normally be needed. Alternatively the tree can be cleared from
userspace by command :ref:`btrfs rescue clear-uuid-tree<man-rescue-clear-uuid-tree>`
and then it will be automatically rebuilt in kernel (the mount option
is not needed in that case).
rescue
(since: 5.9)
Modes allowing mount with damaged filesystem structures, all requires
the filesystem to be mounted read-only and doesn't allow remount to read-write.
This is supposed to provide unified and more fine grained tuning of
errors that affect filesystem operation.
* *usebackuproot* (since 5.9)
@ -370,7 +361,7 @@ skip_balance
Skip automatic resume of an interrupted balance operation. The operation can
later be resumed with :command:`btrfs balance resume`, or the paused state can be
removed with :command:`btrfs balance cancel`. The default behaviour is to resume an
interrupted balance immediately after a volume is mounted.
interrupted balance immediately after the filesystem is mounted.
space_cache, space_cache=<version>, nospace_cache
(*nospace_cache* since: 3.2, *space_cache=v1* and *space_cache=v2* since 4.5, default: *space_cache=v2*)
@ -408,8 +399,9 @@ ssd, ssd_spread, nossd, nossd_spread
Options to control SSD allocation schemes. By default, BTRFS will
enable or disable SSD optimizations depending on status of a device with
respect to rotational or non-rotational type. This is determined by the
contents of */sys/block/DEV/queue/rotational*). If it is 0, the *ssd* option is
turned on. The option *nossd* will disable the autodetection.
contents of :file:`/sys/block/DEV/queue/rotational`). If it is 0, the
*ssd* option is turned on. The option *nossd* will disable the
autodetection.
The optimizations make use of the absence of the seek penalty that's inherent
for the rotational devices. The blocks can be typically written faster and
@ -476,7 +468,7 @@ usebackuproot
use the first readable. This can be used with read-only mounts as well.
.. note::
This option has replaced *recovery*.
This option has replaced *recovery* which has been deprecated.
user_subvol_rm_allowed
(default: off)
@ -513,6 +505,27 @@ inode_cache, noinode_cache
previous use of the *inode_cache* option can be removed by
:ref:`btrfs rescue clear-ino-cache<man-rescue-clear-ino-cache>`.
check_int, check_int_data, check_int_print_mask=<value>
(removed in: 6.7, since: 3.0, default: off)
These debugging options control the behavior of the integrity checking
module (the BTRFS_FS_CHECK_INTEGRITY config option required). The main goal is
to verify that all blocks from a given transaction period are properly linked.
*check_int* enables the integrity checker module, which examines all
block write requests to ensure on-disk consistency, at a large
memory and CPU cost.
*check_int_data* includes extent data in the integrity checks, and
implies the *check_int* option.
*check_int_print_mask* takes a bit mask of BTRFSIC_PRINT_MASK_* values
as defined in *fs/btrfs/check-integrity.c*, to control the integrity
checker module behavior.
See comments at the top of *fs/btrfs/check-integrity.c*
for more information.
NOTES ON GENERIC MOUNT OPTIONS
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@ -520,6 +533,14 @@ NOTES ON GENERIC MOUNT OPTIONS
Some of the general mount options from :manref:`mount(8)` that affect BTRFS and are
worth mentioning.
.. duplabel:: mount-options-generic
context
The context refers to the SELinux contexts and policy definitions passed
as mount options. This works properly since version v6.8 (because the
mount option parser of BTRFS was ported to new API that also understood
the options).
noatime
under read intensive work-loads, specifying *noatime* significantly improves
performance because no new access time information needs to be written. Without
@ -531,5 +552,5 @@ noatime
https://lwn.net/Articles/499293/ - *Atime and btrfs: a bad combination? (LWN, 2012-05-31)*.
Note that *noatime* may break applications that rely on atime uptimes like
the venerable Mutt (unless you use maildir mailboxes).
the venerable Mutt (unless you use *maildir* mailboxes).