btrfs-progs/common/device-scan.c

503 lines
11 KiB
C
Raw Normal View History

/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License v2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 021110-1307, USA.
*/
btrfs-progs: ignore devices representing paths in multipath Currently btrfs-progs will happily enumerate any device which has a btrfs filesystem on it irrespective of its type. For the majority of use cases that's fine and there haven't been any problems with that. However, there was a recent report that in multipath scenario when running "btrfs fi show" after a path flap (path going down and then coming back up) instead of the multipath device being show the device which represents the flapped path is shown. So a multipath filesystem might look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/mapper/3600140501cc1f49e5364f0093869c763 /dev/mapper/xxx is actually backed by an arbitrary number of paths, which in turn are presented to the system as ordinary SCSI devices i.e /dev/sdX. If a path flaps and a user re-runs 'btrfs fi show' the output would look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/sdd This only occurs on unmounted filesystems as those are enumerated by btrfs-progs, for mounted filesystem the kernel properly deals only with the actual multipath device. Turns out the output of this command is consumed by libraries and the presence of a path device rather than the actual multipath causes issues. Fix this by checking for the presence of DM_MULTIPATH_DEVICE_PATH udev attribute as multipath path devices are tagged with this attribute by the multipath udev scripts. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-30 12:06:33 +00:00
#ifdef STATIC_BUILD
#undef HAVE_LIBUDEV
#endif
#include "kerncompat.h"
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/sysmacros.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <dirent.h>
#include <limits.h>
#include <stdbool.h>
#include <blkid/blkid.h>
#include <uuid/uuid.h>
btrfs-progs: ignore devices representing paths in multipath Currently btrfs-progs will happily enumerate any device which has a btrfs filesystem on it irrespective of its type. For the majority of use cases that's fine and there haven't been any problems with that. However, there was a recent report that in multipath scenario when running "btrfs fi show" after a path flap (path going down and then coming back up) instead of the multipath device being show the device which represents the flapped path is shown. So a multipath filesystem might look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/mapper/3600140501cc1f49e5364f0093869c763 /dev/mapper/xxx is actually backed by an arbitrary number of paths, which in turn are presented to the system as ordinary SCSI devices i.e /dev/sdX. If a path flaps and a user re-runs 'btrfs fi show' the output would look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/sdd This only occurs on unmounted filesystems as those are enumerated by btrfs-progs, for mounted filesystem the kernel properly deals only with the actual multipath device. Turns out the output of this command is consumed by libraries and the presence of a path device rather than the actual multipath causes issues. Fix this by checking for the presence of DM_MULTIPATH_DEVICE_PATH udev attribute as multipath path devices are tagged with this attribute by the multipath udev scripts. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-30 12:06:33 +00:00
#ifdef HAVE_LIBUDEV
#include <sys/stat.h>
#include <libudev.h>
#endif
#include "kernel-lib/overflow.h"
#include "kernel-lib/list.h"
#include "kernel-shared/ctree.h"
#include "kernel-shared/volumes.h"
#include "kernel-shared/disk-io.h"
#include "kernel-shared/zoned.h"
#include "common/path-utils.h"
#include "common/device-scan.h"
#include "common/messages.h"
#include "common/utils.h"
#include "common/defs.h"
#include "common/open-utils.h"
#include "common/units.h"
#include "ioctl.h"
static int btrfs_scan_done = 0;
/*
* This function checks if the given input parameter is
* an uuid or a path
* return <0 : some error in the given input
* return BTRFS_ARG_UNKNOWN: unknown input
* return BTRFS_ARG_UUID: given input is uuid
* return BTRFS_ARG_MNTPOINT: given input is path
* return BTRFS_ARG_REG: given input is regular file
* return BTRFS_ARG_BLKDEV: given input is block device
*/
int check_arg_type(const char *input)
{
uuid_t uuid;
char path[PATH_MAX];
if (!input)
return -EINVAL;
if (realpath(input, path)) {
if (path_is_block_device(path) == 1)
return BTRFS_ARG_BLKDEV;
if (path_is_mount_point(path) == 1)
return BTRFS_ARG_MNTPOINT;
if (path_is_reg_file(path))
return BTRFS_ARG_REG;
return BTRFS_ARG_UNKNOWN;
} else {
return -errno;
}
if (strlen(input) == (BTRFS_UUID_UNPARSED_SIZE - 1) &&
!uuid_parse(input, uuid))
return BTRFS_ARG_UUID;
return BTRFS_ARG_UNKNOWN;
}
/* Check if the UUID (as string) appears among devices cached by blkid */
int test_uuid_unique(const char *uuid_str)
{
int unique = 1;
blkid_dev_iterate iter = NULL;
blkid_dev dev = NULL;
blkid_cache cache = NULL;
if (blkid_get_cache(&cache, NULL) < 0) {
error("blkid cache open failed, cannot check uuid uniqueness");
return 1;
}
blkid_probe_all(cache);
iter = blkid_dev_iterate_begin(cache);
blkid_dev_set_search(iter, "UUID", uuid_str);
while (blkid_dev_next(iter, &dev) == 0) {
dev = blkid_verify(cache, dev);
if (dev) {
unique = 0;
break;
}
}
blkid_dev_iterate_end(iter);
blkid_put_cache(cache);
return unique;
}
int btrfs_add_to_fsid(struct btrfs_trans_handle *trans,
struct btrfs_root *root, int fd, const char *path,
u64 device_total_bytes, u32 io_width, u32 io_align,
u32 sectorsize)
{
struct btrfs_super_block *disk_super;
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_super_block *super = fs_info->super_copy;
struct btrfs_device *device;
struct btrfs_dev_item *dev_item;
char *buf = NULL;
const u64 old_size = btrfs_super_total_bytes(super);
u64 new_size;
u64 num_devs;
int ret;
device_total_bytes = (device_total_bytes / sectorsize) * sectorsize;
device = calloc(1, sizeof(*device));
if (!device) {
ret = -ENOMEM;
goto out;
}
buf = calloc(1, sectorsize);
if (!buf) {
ret = -ENOMEM;
goto out;
}
disk_super = (struct btrfs_super_block *)buf;
dev_item = &disk_super->dev_item;
uuid_generate(device->uuid);
device->fs_info = fs_info;
device->devid = 0;
device->type = 0;
device->io_width = io_width;
device->io_align = io_align;
device->sector_size = sectorsize;
device->fd = fd;
device->writeable = 1;
device->total_bytes = device_total_bytes;
device->bytes_used = 0;
device->total_ios = 0;
device->dev_root = fs_info->dev_root;
device->name = strdup(path);
if (!device->name) {
ret = -ENOMEM;
goto out;
}
if (check_add_overflow(old_size, device_total_bytes, &new_size)) {
error(
"adding device of %llu (%s) bytes would exceed max file system size",
device->total_bytes, pretty_size(device->total_bytes));
ret = -EOVERFLOW;
goto out;
}
INIT_LIST_HEAD(&device->dev_list);
ret = btrfs_add_device(trans, fs_info, device);
if (ret)
goto out;
btrfs_set_super_total_bytes(super, new_size);
num_devs = btrfs_super_num_devices(super) + 1;
btrfs_set_super_num_devices(super, num_devs);
memcpy(disk_super, super, sizeof(*disk_super));
btrfs_set_super_bytenr(disk_super, BTRFS_SUPER_INFO_OFFSET);
btrfs_set_stack_device_id(dev_item, device->devid);
btrfs_set_stack_device_type(dev_item, device->type);
btrfs_set_stack_device_io_align(dev_item, device->io_align);
btrfs_set_stack_device_io_width(dev_item, device->io_width);
btrfs_set_stack_device_sector_size(dev_item, device->sector_size);
btrfs_set_stack_device_total_bytes(dev_item, device->total_bytes);
btrfs_set_stack_device_bytes_used(dev_item, device->bytes_used);
memcpy(&dev_item->uuid, device->uuid, BTRFS_UUID_SIZE);
btrfs-progs: zoned: implement log-structured superblock Superblock (and its copies) is the only data structure in btrfs which has a fixed location on a device. Since we cannot overwrite in a sequential write required zone, we cannot place superblock in the zone. One easy solution is limiting superblock and copies to be placed only in conventional zones. However, this method has two downsides: one is reduced number of superblock copies. The location of the second copy of superblock is 256GB, which is in a sequential write required zone on typical devices in the market today. So, the number of superblock and copies is limited to be two. Second downside is that we cannot support devices which have no conventional zones at all. To solve these two problems, we employ superblock log writing. It uses two adjacent zones as a circular buffer to write updated superblocks. Once the first zone is filled up, start writing into the second one. Then, when both zones are filled up and before starting to write to the first zone again, reset the first zone. We can determine the position of the latest superblock by reading write pointer information from a device. One corner case is when both zones are full. For this situation, we read out the last superblock of each zone, and compare them to determine which zone is older. The following zones are reserved as the circular buffer on ZONED btrfs. - primary superblock: offset 0B (and the following zone) - first copy: offset 512G (and the following zone) - Second copy: offset 4T (4096G, and the following zone) If these reserved zones are conventional, superblock is written fixed at the start of the zone without logging. Currently, superblock reading/writing is done by pread/pwrite. This commit replace the call sites with sbread/sbwrite to wrap the functions. For zoned btrfs, btrfs_sb_io which is called from sbread/sbwrite reverses the IO position back to a mirror number, maps the mirror number into the superblock logging position, and do the IO. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-26 06:27:26 +00:00
ret = sbwrite(fd, buf, BTRFS_SUPER_INFO_OFFSET);
/* Ensure super block was written to the device */
BUG_ON(ret != BTRFS_SUPER_INFO_SIZE);
free(buf);
list_add(&device->dev_list, &fs_info->fs_devices->devices);
device->fs_devices = fs_info->fs_devices;
return 0;
out:
free(device->zone_info);
free(device);
free(buf);
return ret;
}
int btrfs_register_one_device(const char *fname)
{
struct btrfs_ioctl_vol_args args;
int fd;
int ret;
fd = open("/dev/btrfs-control", O_RDWR);
if (fd < 0) {
warning(
"failed to open /dev/btrfs-control, skipping device registration: %m");
return -errno;
}
memset(&args, 0, sizeof(args));
strncpy_null(args.name, fname);
ret = ioctl(fd, BTRFS_IOC_SCAN_DEV, &args);
if (ret < 0) {
error("device scan failed on '%s': %m", fname);
ret = -errno;
}
close(fd);
return ret;
}
/*
* Register all devices in the fs_uuid list created in the user
* space. Ensure btrfs_scan_devices() is called before this func.
*/
int btrfs_register_all_devices(void)
{
int err = 0;
int ret = 0;
struct btrfs_fs_devices *fs_devices;
struct btrfs_device *device;
struct list_head *all_uuids;
all_uuids = btrfs_scanned_uuids();
list_for_each_entry(fs_devices, all_uuids, list) {
list_for_each_entry(device, &fs_devices->devices, dev_list) {
if (*device->name)
err = btrfs_register_one_device(device->name);
if (err)
ret++;
}
}
return ret;
}
int btrfs_device_already_in_root(struct btrfs_root *root, int fd,
int super_offset)
{
struct btrfs_super_block disk_super;
int ret = 0;
ret = sbread(fd, &disk_super, super_offset);
if (ret != BTRFS_SUPER_INFO_SIZE)
goto out;
ret = 0;
/*
* Accept devices from the same filesystem, allow partially created
* structures.
*/
if (btrfs_super_magic(&disk_super) != BTRFS_MAGIC &&
btrfs_super_magic(&disk_super) != BTRFS_MAGIC_TEMPORARY)
goto out;
if (!memcmp(disk_super.fsid, root->fs_info->super_copy->fsid,
BTRFS_FSID_SIZE))
ret = 1;
out:
return ret;
}
int is_seen_fsid(u8 *fsid, struct seen_fsid *seen_fsid_hash[])
{
u8 hash = fsid[0];
int slot = hash % SEEN_FSID_HASH_SIZE;
struct seen_fsid *seen = seen_fsid_hash[slot];
while (seen) {
if (memcmp(seen->fsid, fsid, BTRFS_FSID_SIZE) == 0)
return 1;
seen = seen->next;
}
return 0;
}
int add_seen_fsid(u8 *fsid, struct seen_fsid *seen_fsid_hash[],
int fd, DIR *dirstream)
{
u8 hash = fsid[0];
int slot = hash % SEEN_FSID_HASH_SIZE;
struct seen_fsid *seen = seen_fsid_hash[slot];
struct seen_fsid *alloc;
if (!seen)
goto insert;
while (1) {
if (memcmp(seen->fsid, fsid, BTRFS_FSID_SIZE) == 0)
return -EEXIST;
if (!seen->next)
break;
seen = seen->next;
}
insert:
alloc = malloc(sizeof(*alloc));
if (!alloc)
return -ENOMEM;
alloc->next = NULL;
memcpy(alloc->fsid, fsid, BTRFS_FSID_SIZE);
alloc->fd = fd;
alloc->dirstream = dirstream;
if (seen)
seen->next = alloc;
else
seen_fsid_hash[slot] = alloc;
return 0;
}
void free_seen_fsid(struct seen_fsid *seen_fsid_hash[])
{
int slot;
struct seen_fsid *seen;
struct seen_fsid *next;
for (slot = 0; slot < SEEN_FSID_HASH_SIZE; slot++) {
seen = seen_fsid_hash[slot];
while (seen) {
next = seen->next;
close_file_or_dir(seen->fd, seen->dirstream);
free(seen);
seen = next;
}
seen_fsid_hash[slot] = NULL;
}
}
#ifdef STATIC_BUILD
static bool is_multipath_path_device(dev_t device)
{
FILE *file;
char *line = NULL;
size_t len = 0;
ssize_t nread;
bool ret = false;
int ret2;
char path[PATH_MAX];
ret2 = snprintf(path, sizeof(path), "/run/udev/data/b%u:%u", major(device),
minor(device));
if (ret2 < 0)
return false;
file = fopen(path, "r");
if (file == NULL)
return false;
while ((nread = getline(&line, &len, file)) != -1) {
if (strstr(line, "DM_MULTIPATH_DEVICE_PATH=1")) {
ret = true;
break;
}
}
if (line)
free(line);
fclose(file);
return ret;
}
#elif defined(HAVE_LIBUDEV)
static bool is_multipath_path_device(dev_t device)
btrfs-progs: ignore devices representing paths in multipath Currently btrfs-progs will happily enumerate any device which has a btrfs filesystem on it irrespective of its type. For the majority of use cases that's fine and there haven't been any problems with that. However, there was a recent report that in multipath scenario when running "btrfs fi show" after a path flap (path going down and then coming back up) instead of the multipath device being show the device which represents the flapped path is shown. So a multipath filesystem might look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/mapper/3600140501cc1f49e5364f0093869c763 /dev/mapper/xxx is actually backed by an arbitrary number of paths, which in turn are presented to the system as ordinary SCSI devices i.e /dev/sdX. If a path flaps and a user re-runs 'btrfs fi show' the output would look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/sdd This only occurs on unmounted filesystems as those are enumerated by btrfs-progs, for mounted filesystem the kernel properly deals only with the actual multipath device. Turns out the output of this command is consumed by libraries and the presence of a path device rather than the actual multipath causes issues. Fix this by checking for the presence of DM_MULTIPATH_DEVICE_PATH udev attribute as multipath path devices are tagged with this attribute by the multipath udev scripts. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-30 12:06:33 +00:00
{
struct udev *udev = NULL;
struct udev_device *dev = NULL;
const char *val;
bool ret = false;
udev = udev_new();
if (!udev)
goto out;
dev = udev_device_new_from_devnum(udev, 'b', device);
btrfs-progs: ignore devices representing paths in multipath Currently btrfs-progs will happily enumerate any device which has a btrfs filesystem on it irrespective of its type. For the majority of use cases that's fine and there haven't been any problems with that. However, there was a recent report that in multipath scenario when running "btrfs fi show" after a path flap (path going down and then coming back up) instead of the multipath device being show the device which represents the flapped path is shown. So a multipath filesystem might look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/mapper/3600140501cc1f49e5364f0093869c763 /dev/mapper/xxx is actually backed by an arbitrary number of paths, which in turn are presented to the system as ordinary SCSI devices i.e /dev/sdX. If a path flaps and a user re-runs 'btrfs fi show' the output would look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/sdd This only occurs on unmounted filesystems as those are enumerated by btrfs-progs, for mounted filesystem the kernel properly deals only with the actual multipath device. Turns out the output of this command is consumed by libraries and the presence of a path device rather than the actual multipath causes issues. Fix this by checking for the presence of DM_MULTIPATH_DEVICE_PATH udev attribute as multipath path devices are tagged with this attribute by the multipath udev scripts. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-30 12:06:33 +00:00
if (!dev)
goto out;
val = udev_device_get_property_value(dev, "DM_MULTIPATH_DEVICE_PATH");
if (val && atoi(val) > 0)
ret = true;
out:
udev_device_unref(dev);
udev_unref(udev);
return ret;
}
#else
static bool is_multipath_path_device(dev_t device)
btrfs-progs: ignore devices representing paths in multipath Currently btrfs-progs will happily enumerate any device which has a btrfs filesystem on it irrespective of its type. For the majority of use cases that's fine and there haven't been any problems with that. However, there was a recent report that in multipath scenario when running "btrfs fi show" after a path flap (path going down and then coming back up) instead of the multipath device being show the device which represents the flapped path is shown. So a multipath filesystem might look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/mapper/3600140501cc1f49e5364f0093869c763 /dev/mapper/xxx is actually backed by an arbitrary number of paths, which in turn are presented to the system as ordinary SCSI devices i.e /dev/sdX. If a path flaps and a user re-runs 'btrfs fi show' the output would look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/sdd This only occurs on unmounted filesystems as those are enumerated by btrfs-progs, for mounted filesystem the kernel properly deals only with the actual multipath device. Turns out the output of this command is consumed by libraries and the presence of a path device rather than the actual multipath causes issues. Fix this by checking for the presence of DM_MULTIPATH_DEVICE_PATH udev attribute as multipath path devices are tagged with this attribute by the multipath udev scripts. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-30 12:06:33 +00:00
{
return false;
}
#endif
int btrfs_scan_devices(int verbose)
{
int fd = -1;
int ret;
u64 num_devices;
struct btrfs_fs_devices *tmp_devices;
blkid_dev_iterate iter = NULL;
blkid_dev dev = NULL;
blkid_cache cache = NULL;
char path[PATH_MAX];
if (btrfs_scan_done)
return 0;
ret = blkid_get_cache(&cache, NULL);
if (ret < 0) {
errno = -ret;
error("blkid cache get failed: %m");
return ret;
}
blkid_probe_all(cache);
iter = blkid_dev_iterate_begin(cache);
blkid_dev_set_search(iter, "TYPE", "btrfs");
while (blkid_dev_next(iter, &dev) == 0) {
struct stat dev_stat;
dev = blkid_verify(cache, dev);
if (!dev)
continue;
/* if we are here its definitely a btrfs disk*/
strncpy_null(path, blkid_dev_devname(dev));
if (stat(path, &dev_stat) < 0)
continue;
if (is_multipath_path_device(dev_stat.st_rdev))
btrfs-progs: ignore devices representing paths in multipath Currently btrfs-progs will happily enumerate any device which has a btrfs filesystem on it irrespective of its type. For the majority of use cases that's fine and there haven't been any problems with that. However, there was a recent report that in multipath scenario when running "btrfs fi show" after a path flap (path going down and then coming back up) instead of the multipath device being show the device which represents the flapped path is shown. So a multipath filesystem might look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/mapper/3600140501cc1f49e5364f0093869c763 /dev/mapper/xxx is actually backed by an arbitrary number of paths, which in turn are presented to the system as ordinary SCSI devices i.e /dev/sdX. If a path flaps and a user re-runs 'btrfs fi show' the output would look like: Label: none uuid: d3c1261f-18be-4015-9fef-6b35759dfdba Total devices 1 FS bytes used 192.00KiB devid 1 size 10.00GiB used 536.00MiB path /dev/sdd This only occurs on unmounted filesystems as those are enumerated by btrfs-progs, for mounted filesystem the kernel properly deals only with the actual multipath device. Turns out the output of this command is consumed by libraries and the presence of a path device rather than the actual multipath causes issues. Fix this by checking for the presence of DM_MULTIPATH_DEVICE_PATH udev attribute as multipath path devices are tagged with this attribute by the multipath udev scripts. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-09-30 12:06:33 +00:00
continue;
fd = open(path, O_RDONLY);
if (fd < 0) {
error("cannot open %s: %m", path);
continue;
}
ret = btrfs_scan_one_device(fd, path, &tmp_devices,
&num_devices, BTRFS_SUPER_INFO_OFFSET,
SBREAD_DEFAULT);
if (ret) {
errno = -ret;
error("cannot scan %s: %m", path);
close (fd);
continue;
}
pr_verbose(verbose, "registered: %s\n", path);
close(fd);
}
blkid_dev_iterate_end(iter);
blkid_put_cache(cache);
btrfs_scan_done = 1;
return 0;
}