btrfs-progs/Documentation/btrfs-qgroup.rst

btrfs-qgroup(8)
===============

SYNOPSIS
--------

**btrfs qgroup** <subcommand> <args>

DESCRIPTION
-----------

**btrfs qgroup** is used to control quota group (qgroup) of a btrfs filesystem.

.. note::
   To use qgroup you need to enable quota first using **btrfs quota enable**
   command.

.. warning::
   Qgroup is not stable yet and will impact performance in current mainline
   kernel (v4.14).

QGROUP
------

Quota groups or qgroup in btrfs make a tree hierarchy, the leaf qgroups are
attached to subvolumes. The size limits are set per qgroup and apply when any
limit is reached in tree that contains a given subvolume.

The limits are separated between shared and exclusive and reflect the extent
ownership. For example a fresh snapshot shares almost all the blocks with the
original subvolume, new writes to either subvolume will raise towards the
exclusive limit.

The qgroup identifiers conform to *level/id* where level 0 is reserved to the
qgroups associated with subvolumes. Such qgroups are created automatically.

The qgroup hierarchy is built by commands **create** and **assign**.

.. note::
   If the qgroup of a subvolume is destroyed, quota about the subvolume will
   not be functional until qgroup *0/<subvolume id>* is created again.

SUBCOMMAND
----------

assign [options] <src> <dst> <path>
        Assign qgroup *src* as the child qgroup of *dst* in the btrfs filesystem
        identified by *path*.

        ``Options``

        --rescan
                (default since: 4.19) Automatically schedule quota rescan if the new qgroup
                assignment would lead to quota inconsistency. See *QUOTA RESCAN* for more
                information.
        --no-rescan
                Explicitly ask not to do a rescan, even if the assignment will make the quotas
                inconsistent. This may be useful for repeated calls where the rescan would add
                unnecessary overhead.

create <qgroupid> <path>
        Create a subvolume quota group.

        For the *0/<subvolume id>* qgroup, a qgroup can be created even before the
        subvolume is created.

destroy <qgroupid> <path>
        Destroy a qgroup.

        If a qgroup is not isolated, meaning it is a parent or child qgroup, then it
        can only be destroyed after the relationship is removed.

limit [options] <size>|none [<qgroupid>] <path>
        Limit the size of a qgroup to *size* or no limit in the btrfs filesystem
        identified by *path*.

        If *qgroupid* is not given, qgroup of the subvolume identified by *path*
        is used if possible.

        ``Options``

        -c
                limit amount of data after compression. This is the default, it is currently not
                possible to turn off this option.
        -e
                limit space exclusively assigned to this qgroup.

remove <src> <dst> <path>
        Remove the relationship between child qgroup *src* and parent qgroup *dst* in
        the btrfs filesystem identified by *path*.

        ``Options``

        --rescan
                (default since: 4.19) Automatically schedule quota rescan if the removed qgroup
                relation would lead to quota inconsistency. See *QUOTA RESCAN* for more
                information.
        --no-rescan
                Explicitly ask not to do a rescan, even if the removal will make the quotas
                inconsistent. This may be useful for repeated calls where the rescan would add
                unnecessary overhead.

show [options] <path>
        Show all qgroups in the btrfs filesystem identified by <path>.

        ``Options``

        -p
                print parent qgroup id.
        -c
                print child qgroup id.
        -r
                print limit of referenced size of qgroup.
        -e
                print limit of exclusive size of qgroup.
        -F
                list all qgroups which impact the given path(include ancestral qgroups)
        -f
                list all qgroups which impact the given path(exclude ancestral qgroups)
        --raw
                raw numbers in bytes, without the *B* suffix.
        --human-readable
                print human friendly numbers, base 1024, this is the default
        --iec
                select the 1024 base for the following options, according to the IEC standard.
        --si
                select the 1000 base for the following options, according to the SI standard.
        --kbytes
                show sizes in KiB, or kB with --si.
        --mbytes
                show sizes in MiB, or MB with --si.
        --gbytes
                show sizes in GiB, or GB with --si.
        --tbytes
                show sizes in TiB, or TB with --si.

        --sort=[\+/-]<attr>[,[+/-]<attr>]...
                list qgroups in order of <attr>.

                <attr> can be one or more of qgroupid,rfer,excl,max_rfer,max_excl.

                Prefix *+* means ascending order and *-* means descending order of *attr*.
                If no prefix is given, use ascending order by default.

                If multiple *attr* values are given, use comma to separate.

        --sync
                To retrieve information after updating the state of qgroups,
                force sync of the filesystem identified by *path* before getting information.

QUOTA RESCAN
------------

The rescan reads all extent sharing metadata and updates the respective qgoups
accordingly.

The information consists of bytes owned exclusively (*excl*) or shared/referred
to (*rfer*). There's no explicit information about which extents are shared or
owned exclusively.  This means when qgroup relationship changes, extent owners
change and qgroup numbers are no longer consistent unless we do a full rescan.

However there are cases where we can avoid a full rescan, if a subvolume whose
*rfer* number equals its *excl* number, which means all bytes are exclusively
owned, then assigning/removing this subvolume only needs to add/subtract *rfer*
number from its parent qgroup. This can speed up the rescan.

EXAMPLES
--------

Make a parent group that has two quota group children
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Given the following filesystem mounted at `/mnt/my-vault`

.. code-block:: none

        Label: none  uuid: 60d2ab3b-941a-4f22-8d1a-315f329797b2
               Total devices 1 FS bytes used 128.00KiB
               devid    1 size 5.00GiB used 536.00MiB path /dev/vdb

Enable quota and create subvolumes.  Check subvolume ids.

.. code-block:: bash

        $ cd /mnt/my-vault
        $ btrfs quota enable .
        $ btrfs subvolume create a
        $ btrfs subvolume create b
        $ btrfs subvolume list .

        ID 261 gen 61 top level 5 path a
        ID 262 gen 62 top level 5 path b

Create qgroup and set limit to 10MiB.

.. code-block:: bash

        $ btrfs qgroup create 1/100 .
        $ btrfs qgroup limit 10M 1/100 .
        $ btrfs qgroup assign 0/261 1/100 .
        $ btrfs qgroup assign 0/262 1/100 .

And check qgroups.

.. code-block:: bash

        $ btrfs qgroup show .

        qgroupid         rfer         excl
        --------         ----         ----
        0/5          16.00KiB     16.00KiB
        0/261        16.00KiB     16.00KiB
        0/262        16.00KiB     16.00KiB
        1/100        32.00KiB     32.00KiB


EXIT STATUS
-----------

**btrfs qgroup** returns a zero exit status if it succeeds. Non zero is
returned in case of failure.

AVAILABILITY
------------

**btrfs** is part of btrfs-progs.
Please refer to the btrfs wiki http://btrfs.wiki.kernel.org for
further details.

SEE ALSO
--------

:doc:`btrfs-quota(8)<btrfs-quota>`,
:doc:`btrfs-subvolume(8)<btrfs-subvolume>`,
:doc:`mkfs.btrfs(8)<mkfs.btrfs>`,