btrfs-progs/Documentation/btrfs-check.rst

btrfs-check(8)
==============

SYNOPSIS
--------

**btrfs check** [options] <device>

DESCRIPTION
-----------

The filesystem checker is used to verify structural integrity of a filesystem
and attempt to repair it if requested.  It is recommended to unmount the
filesystem prior to running the check, but it is possible to start checking a
mounted filesystem (see *--force*).

By default, **btrfs check** will not modify the device but you can reaffirm that
by the option *--readonly*.

**btrfsck** is an alias of **btrfs check** command and is now deprecated.

.. warning::
   Do not use *--repair* unless you are advised to do so by a developer
   or an experienced user, and then only after having accepted that no *fsck*
   successfully repair all types of filesystem corruption. Eg. some other software
   or hardware bugs can fatally damage a volume.

The structural integrity check verifies if internal filesystem objects or
data structures satisfy the constraints, point to the right objects or are
correctly connected together.

There are several cross checks that can detect wrong reference counts of shared
extents, backreferences, missing extents of inodes, directory and inode
connectivity etc.

The amount of memory required can be high, depending on the size of the
filesystem, similarly the run time. Check the modes that can also affect that.


SAFE OR ADVISORY OPTIONS
------------------------

-b|--backup
        use the first valid set of backup roots stored in the superblock

        This can be combined with *--super* if some of the superblocks are damaged.

--check-data-csum
        verify checksums of data blocks

        This expects that the filesystem is otherwise OK, and is basically an offline
        *scrub* that does not repair data from spare copies.

--chunk-root <bytenr>
        use the given offset *bytenr* for the chunk tree root

-E|--subvol-extents <subvolid>
        show extent state for the given subvolume

-p|--progress
        indicate progress at various checking phases

-Q|--qgroup-report
        verify qgroup accounting and compare against filesystem accounting

-r|--tree-root <bytenr>
        use the given offset 'bytenr' for the tree root

--readonly
        (default)
        run in read-only mode, this option exists to calm potential panic when users
        are going to run the checker

-s|--super <N>
        use Nth superblock copy, valid values are 0, 1 or 2 if the
        respective superblock offset is within the device size

        This can be used to use a different starting point if some of the primary
        superblock is damaged.

--clear-space-cache v1|v2
        completely wipe all free space cache of given type

        For free space cache *v1*, the *clear_cache* kernel mount option only rebuilds
        the free space cache for block groups that are modified while the filesystem is
        mounted with that option. Thus, using this option with *v1* makes it possible
        to actually clear the entire free space cache.

        For free space cache *v2*, the *clear_cache* kernel mount option destroys
        the entire free space cache. This option, with *v2* provides an alternative
        method of clearing the free space cache that doesn't require mounting the
        filesystem.

--clear-ino-cache
        remove leftover items pertaining to the deprecated inode map feature


DANGEROUS OPTIONS
-----------------

--repair
        enable the repair mode and attempt to fix problems where possible

        .. note::
                There's a warning and 10 second delay when this option is run without
                *--force* to give users a chance to think twice before running repair, the
                warnings in documentation have shown to be insufficient

--init-csum-tree
        create a new checksum tree and recalculate checksums in all files

        .. warning::
                Do not blindly use this option to fix checksum mismatch problems.

--init-extent-tree
        build the extent tree from scratch

        .. warning::
                Do not use unless you know what you're doing.

--mode <MODE>
        select mode of operation regarding memory and IO

        The *MODE* can be one of:

        original
                The metadata are read into memory and verified, thus the requirements are high
                on large filesystems and can even lead to out-of-memory conditions.  The
                possible workaround is to export the block device over network to a machine
                with enough memory.
        lowmem
                This mode is supposed to address the high memory consumption at the cost of
                increased IO when it needs to re-read blocks.  This may increase run time.

        .. note::
                *lowmem* mode does not work with *--repair* yet, and is still considered
                experimental.

--force
        allow work on a mounted filesystem. Note that this should work fine on a
        quiescent or read-only mounted filesystem but may crash if the device is
        changed externally, eg. by the kernel module.  Repair without mount checks is
        not supported right now.

        This option also skips the delay and warning in the repair mode (see
        *--repair*).

EXIT STATUS
-----------

**btrfs check** returns a zero exit status if it succeeds. Non zero is
returned in case of failure.

AVAILABILITY
------------

**btrfs** is part of btrfs-progs.
Please refer to the btrfs wiki http://btrfs.wiki.kernel.org for
further details.

SEE ALSO
--------

:doc:`mkfs.btrfs(8)<mkfs.btrfs>`,
:doc:`btrfs-scrub(8)<btrfs-scrub>`,
:doc:`btrfs-rescue(8)<btrfs-rescue>`