btrfs-progs/Documentation/ch-quota-intro.rst

The concept of quota has a long-standing tradition in the Unix world.  Ever
since computers allow multiple users to work simultaneously in one filesystem,
there is the need to prevent one user from using up the entire space.  Every
user should get his fair share of the available resources.

In case of files, the solution is quite straightforward.  Each file has an
*owner* recorded along with it, and it has a size.  Traditional quota just
restricts the total size of all files that are owned by a user.  The concept is
quite flexible: if a user hits his quota limit, the administrator can raise it
on the fly.

On the other hand, the traditional approach has only a poor solution to
restrict directories.
At installation time, the harddisk can be partitioned so that every directory
(e.g. /usr, /var/, ...) that needs a limit gets its own partition.  The obvious
problem is that those limits cannot be changed without a reinstallation.  The
btrfs subvolume feature builds a bridge.  Subvolumes correspond in many ways to
partitions, as every subvolume looks like its own filesystem.  With subvolume
quota, it is now possible to restrict each subvolume like a partition, but keep
the flexibility of quota.  The space for each subvolume can be expanded or
restricted on the fly.

As subvolumes are the basis for snapshots, interesting questions arise as to
how to account used space in the presence of snapshots.  If you have a file
shared between a subvolume and a snapshot, whom to account the file to? The
creator? Both? What if the file gets modified in the snapshot, should only
these changes be accounted to it? But wait, both the snapshot and the subvolume
belong to the same user home.  I just want to limit the total space used by
both! But somebody else might not want to charge the snapshots to the users.

Btrfs subvolume quota solves these problems by introducing groups of subvolumes
and let the user put limits on them.  It is even possible to have groups of
groups.  In the following, we refer to them as *qgroups*.

Each qgroup primarily tracks two numbers, the amount of total referenced
space and the amount of exclusively referenced space.

referenced
        space is the amount of data that can be reached from any of the
        subvolumes contained in the qgroup, while
exclusive
        is the amount of data where all references to this data can be reached
        from within this qgroup.

Subvolume quota groups
^^^^^^^^^^^^^^^^^^^^^^

The basic notion of the Subvolume Quota feature is the quota group, short
qgroup.  Qgroups are notated as *level/id*, e.g.  the qgroup 3/2 is a qgroup of
level 3. For level 0, the leading '0/' can be omitted.
Qgroups of level 0 get created automatically when a subvolume/snapshot gets
created.  The ID of the qgroup corresponds to the ID of the subvolume, so 0/5
is the qgroup for the root subvolume.
For the :command:`btrfs qgroup` command, the path to the subvolume can also be used
instead of *0/ID*.  For all higher levels, the ID can be chosen freely.

Each qgroup can contain a set of lower level qgroups, thus creating a hierarchy
of qgroups. Figure 1 shows an example qgroup tree.

.. code-block:: none

                                  +---+
                                  |2/1|
                                  +---+
                                 /     \
                           +---+/       \+---+
                           |1/1|         |1/2|
                           +---+         +---+
                          /     \       /     \
                    +---+/       \+---+/       \+---+
        qgroups     |0/1|         |0/2|         |0/3|
                    +-+-+         +---+         +---+
                      |          /     \       /     \
                      |         /       \     /       \
                      |        /         \   /         \
        extents       1       2            3            4

        Figure 1: Sample qgroup hierarchy

At the bottom, some extents are depicted showing which qgroups reference which
extents.  It is important to understand the notion of *referenced* vs
*exclusive*.  In the example, qgroup 0/2 references extents 2 and 3, while 1/2
references extents 2-4, 2/1 references all extents.

On the other hand, extent 1 is exclusive to 0/1, extent 2 is exclusive to 0/2,
while extent 3 is neither exclusive to 0/2 nor to 0/3.  But because both
references can be reached from 1/2, extent 3 is exclusive to 1/2.  All extents
are exclusive to 2/1.

So exclusive does not mean there is no other way to reach the extent, but it
does mean that if you delete all subvolumes contained in a qgroup, the extent
will get deleted.

Exclusive of a qgroup conveys the useful information how much space will be
freed in case all subvolumes of the qgroup get deleted.

All data extents are accounted this way.  Metadata that belongs to a specific
subvolume (i.e.  its filesystem tree) is also accounted.  Checksums and extent
allocation information are not accounted.

In turn, the referenced count of a qgroup can be limited.  All writes beyond
this limit will lead to a 'Quota Exceeded' error.

Inheritance
^^^^^^^^^^^

Things get a bit more complicated when new subvolumes or snapshots are created.
The case of (empty) subvolumes is still quite easy.  If a subvolume should be
part of a qgroup, it has to be added to the qgroup at creation time.  To add it
at a later time, it would be necessary to at least rescan the full subvolume
for a proper accounting.

Creation of a snapshot is the hard case.  Obviously, the snapshot will
reference the exact amount of space as its source, and both source and
destination now have an exclusive count of 0 (the filesystem nodesize to be
precise, as the roots of the trees are not shared).  But what about qgroups of
higher levels? If the qgroup contains both the source and the destination,
nothing changes.  If the qgroup contains only the source, it might lose some
exclusive.

But how much? The tempting answer is, subtract all exclusive of the source from
the qgroup, but that is wrong, or at least not enough.  There could have been
an extent that is referenced from the source and another subvolume from that
qgroup.  This extent would have been exclusive to the qgroup, but not to the
source subvolume.  With the creation of the snapshot, the qgroup would also
lose this extent from its exclusive set.

So how can this problem be solved? In the instant the snapshot gets created, we
already have to know the correct exclusive count.  We need to have a second
qgroup that contains all the subvolumes as the first qgroup, except the
subvolume we want to snapshot.  The moment we create the snapshot, the
exclusive count from the second qgroup needs to be copied to the first qgroup,
as it represents the correct value.  The second qgroup is called a tracking
qgroup.  It is only there in case a snapshot is needed.

Use cases
^^^^^^^^^

Below are some use cases that do not mean to be extensive. You can find your
own way how to integrate qgroups.

Single-user machine
"""""""""""""""""""

``Replacement for partitions``

The simplest use case is to use qgroups as simple replacement for partitions.
Btrfs takes the disk as a whole, and /, /usr, /var, etc. are created as
subvolumes.  As each subvolume gets it own qgroup automatically, they can
simply be restricted.  No hierarchy is needed for that.

``Track usage of snapshots``

When a snapshot is taken, a qgroup for it will automatically be created with
the correct values.  'Referenced' will show how much is in it, possibly shared
with other subvolumes.  'Exclusive' will be the amount of space that gets freed
when the subvolume is deleted.

Multi-user machine
""""""""""""""""""

``Restricting homes``

When you have several users on a machine, with home directories probably under
/home, you might want to restrict /home as a whole, while restricting every
user to an individual limit as well.  This is easily accomplished by creating a
qgroup for /home , e.g. 1/1, and assigning all user subvolumes to it.
Restricting this qgroup will limit /home, while every user subvolume can get
its own (lower) limit.

``Accounting snapshots to the user``

Let's say the user is allowed to create snapshots via some mechanism.  It would
only be fair to account space used by the snapshots to the user.  This does not
mean the user doubles his usage as soon as he takes a snapshot.  Of course,
files that are present in his home and the snapshot should only be accounted
once.  This can be accomplished by creating a qgroup for each user, say
'1/UID'.  The user home and all snapshots are assigned to this qgroup.
Limiting it will extend the limit to all snapshots, counting files only once.
To limit /home as a whole, a higher level group 2/1 replacing 1/1 from the
previous example is needed, with all user qgroups assigned to it.

``Do not account snapshots``

On the other hand, when the snapshots get created automatically, the user has
no chance to control them, so the space used by them should not be accounted to
him.  This is already the case when creating snapshots in the example from
the previous section.

``Snapshots for backup purposes``

This scenario is a mixture of the previous two.  The user can create snapshots,
but some snapshots for backup purposes are being created by the system.  The
user's snapshots should be accounted to the user, not the system.  The solution
is similar to the one from section 'Accounting snapshots to the user', but do
not assign system snapshots to user's qgroup.