Some services need some preparation or configuration to work. Not all can work out of the box.

General:
	- Every database-backed service needs manual user creation and db creation
	- Every service needs to be started and enabled manually via openrc (custom services end in .redxen)
	- Every service that needs ports needs entries in /etc/iptables/rx-rules{4,6}
	- Every service that needs data storage needs a volume to back it

ifupdown-ng:
	- Public networks should be configured manually since RAs aren't usually configured
		``` HETZNER EXAMPLE
		auto eth0
		iface eth0 inet static
			address 
			netmask 255.255.255.255
			gateway 172.31.1.1
			pointopoint 172.31.1.1

		iface eth0 inet6 static
			address 
			netmask 64
			gateway fe80::1
		```
	- Private networks need this workaround for routing to work properly
		```
		auto eth1
		iface eth1 inet dhcp
			up ip route add 10.0.0.0/16 via 10.0.0.1 dev eth1
			post-up ip route del default via 10.0.0.1 dev eth1
		```
Yggdrasil:
	- Yggdrasil needs manual configuration for peers and whitelisting

Unbound:
	- Set `RESOLV_CONF=no` in /etc/udhcpc/udhcpc.conf to prevent automatic DNS configuration

OpenSSH SFTP Chroot (part of seedbox):
	- Bind mounts from location of chroot to /sftp-chroot
	    NOTE: Usually `mount -o bind /seedbox /sftp-chroot`
	- seedbox user needs to be manually appended to /etc/ssh/sshd_config

Pleroma:
	- Migration might be needed between upgrades (/pleroma/bin/pleroma_ctl migrate)

Wireguard:
	- Requires the following iptables rules other than the port opening
		```
		*filter
		-A FORWARD -i rxmain -o eth0 -j ACCEPT
		-A FORWARD -i eth0 -o rxmain -j ACCEPT
		*nat
		-A POSTROUTING -o eth0 -j MASQUERADE
		```