Added links to index page for repo, entity db and the site. Fixing radv section.

docs/index.md

@@ -107,3 +107,11 @@ the original babel routing software, _babeld_, here, on the [live router map](ht
 Does it sound interesting enough for you already? Want to get connected? Then head on over
 to our [Getting started] section where you can find all the guides you need in order to get connected,
 follow the rules and have fun!
+
+---
+
+## Important links
+
+* The CRXN homepage is: http://deavmi.assigned.network/projects/crxn
+* The **EntityDB** repository is: https://codeberg.org/CRXN/entitydb
+* This documentation is at: https://github.com/Community-Run-eXperimental-Network/docs

docs/radv.md

@@ -3,7 +3,13 @@ Radv
 
 Radv or _Router advertisements_ is a feature Bird offers that can allow you to add an additional configuration to your Bird router such that you
 can have it automatically configure your host devices on your CRXN /48 LAN such that they can access the LAN, the greater CRXN and also possibly
-configure [CRXN DNS]() too!
+configure [CRXN DNS](../dns) too!
+
+There are tutorials for both:
+
+1. [Bird 1.6](bird1.6_radv.md) (untested)
+2. [Bird 2.0](bird2_radv.md)
+
 
 ---
 

docs/radv/bird1.6_radv.md

@@ -0,0 +1,64 @@
+Radv
+====
+
+This document is for setting up radv on Bird 1.6.
+
+# General syntax
+
+You will want to add one of these to one of your Bird configuration files:
+
+```
+protocol radv
+{
+    # Stuff goes here
+}
+```
+
+## Advertising your prefix
+
+If you would like to advertise your prefix to hosts on your LAN that have set their address acquisition for IPv6 to _'Automatic'_ such that they will assign themselves an address within that prefix then you will want to add a `prefix` block as so:
+
+```
+protocol radv
+{
+    # Advertise your prefix
+    prefix fd40:ec65:5b4c::/64 {
+        # TODO: Add anything that needs to be in here
+    };
+
+    # Interfaces to run radv on
+    interface "eth0";
+
+}
+```
+
+In the above example I am advertising a `/64` within my `/48`/ULA (`fd40:ec65:5b4c::/48`), `fd40:ec65:5b4c::/64`, and only on interface `eth0` will radv run.
+
+## Advertising route(s)
+
+You can advertise a default route, to `fd00::/8` or simply all routes in your router's routing table, to your hosts using the following:
+
+### Advertising a single `fd00::/8`
+
+TODO: Add this as I normally don't do this even though one should as it means less memory consumption and advertisement updates
+
+### Advertising all known routes
+
+This will advertise all the routes your Bird router knows (those in the `crxn` table) such that your, laptop for example, will add all of them to its routing table.
+
+```
+protocol radv
+{
+    # Advertise your prefix
+    prefix fd40:ec65:5b4c::/64 {
+        # TODO: Add anything that needs to be in here
+    };
+
+    # Interfaces to run radv on
+    interface "eth0";
+
+    # Advertise all routes (TODO: check if this is the correct syntax)
+    propagate_routes yes;
+    table crxn;
+}
+```

docs/radv/bird2_radv.md

@@ -0,0 +1,74 @@
+Radv
+====
+
+This document is for setting up radv on Bird 2.0.
+
+# General syntax
+
+You will want to add one of these to one of your Bird configuration files:
+
+```
+protocol radv
+{
+    # Stuff goes here
+}
+```
+
+## Advertising your prefix
+
+If you would like to advertise your prefix to hosts on your LAN that have set their address acquisition for IPv6 to _'Automatic'_ such that they will assign themselves an address within that prefix then you will want to add a `prefix` block as so:
+
+```
+protocol radv
+{
+    # Advertise your prefix
+    prefix fd40:ec65:5b4c::/64 {
+        # TODO: Add anything that needs to be in here
+    };
+
+    # Interfaces to run radv on
+    interface "eth0";
+
+}
+```
+
+In the above example I am advertising a `/64` within my `/48`/ULA (`fd40:ec65:5b4c::/48`), `fd40:ec65:5b4c::/64`, and only on interface `eth0` will radv run.
+
+## Advertising route(s)
+
+You can advertise a default route, to `fd00::/8` or simply all routes in your router's routing table, to your hosts using the following:
+
+### Advertising a single `fd00::/8`
+
+TODO: Add this as I normally don't do this even though one should as it means less memory consumption and advertisement updates
+
+### Advertising all known routes
+
+This will advertise all the routes your Bird router knows (those in the `crxn` table) such that your, laptop for example, will add all of them to its routing table.
+
+```
+protocol radv
+{
+	# Enable propagating of routes exported to us via radv to hosts
+	propagate routes yes;
+
+	ipv6 {
+		# Export all your routes into the radv advertisement
+		export filter crxn6;
+		table crxn;
+	};
+
+	# Interface to run radv on - only eth0 (change to what you want)
+	interface "eth0" {
+		# Advertise your prefix
+	    prefix fd40:ec65:5b4c::/64 {
+	        # Defaults are fine
+	    };
+
+	    # Normally it will distribute a default route, disable that (TODO: Check)
+	    prefix ::/0 {
+	      	skip yes;
+	    };
+	};
+}
+```