## <summary>
##	Policy for kernel security interface, in particular, selinuxfs.
## </summary>
## <required val="true">
##	Contains the policy for the kernel SELinux security interface.
## </required>

########################################
## <summary>
##	Make the specified type used for labeling SELinux Booleans.
##	This interface is only usable in the base module.
## </summary>
## <desc>
##	<p>
##	Make the specified type used for labeling SELinux Booleans.
##	</p>
##	<p>
##	This makes use of genfscon statements, which are only
##	available in the base module.  Thus any module which calls this
##	interface must be included in the base module.
##	</p>
## </desc>
## <param name="type">
##	<summary>
##	Type used for labeling a Boolean.
##	</summary>
## </param>
## <param name="boolean">
##	<summary>
##	Name of the Boolean.
##	</summary>
## </param>
#
interface(`selinux_labeled_boolean',`
	gen_require(`
		attribute boolean_type;
	')

	typeattribute $1 boolean_type;

	# because of this statement, any module which
	# calls this interface must be in the base module:
	genfscon selinuxfs /booleans/$2 gen_context(system_u:object_r:$1,s0)
')

########################################
## <summary>
##	Get the mountpoint of the selinuxfs filesystem.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_get_fs_mount',`
	gen_require(`
		type security_t;
	')

	# starting in libselinux 2.0.5, init_selinuxmnt() will
	# attempt to short circuit by checking if SELINUXMNT
	# (/selinux) is already a selinuxfs
	allow $1 security_t:filesystem getattr;

	# read /proc/filesystems to see if selinuxfs is supported
	# then read /proc/self/mount to see where selinuxfs is mounted
	kernel_read_system_state($1)
')

########################################
## <summary>
##	Do not audit attempts to get the mountpoint
##	of the selinuxfs filesystem.
## </summary>
## <param name="domain">
##	<summary>
##	Domain to not audit.
##	</summary>
## </param>
#
interface(`selinux_dontaudit_get_fs_mount',`
	gen_require(`
		type security_t;
	')

	# starting in libselinux 2.0.5, init_selinuxmnt() will
	# attempt to short circuit by checking if SELINUXMNT
	# (/selinux) is already a selinuxfs
	dontaudit $1 security_t:filesystem getattr;

	# read /proc/filesystems to see if selinuxfs is supported
	# then read /proc/self/mount to see where selinuxfs is mounted
	kernel_dontaudit_read_system_state($1)
')

########################################
## <summary>
##	Mount the selinuxfs filesystem.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_mount_fs',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:filesystem mount;
')

########################################
## <summary>
##	Remount the selinuxfs filesystem.
##	This allows some mount options to be changed.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_remount_fs',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:filesystem remount;
')

########################################
## <summary>
##	Unmount the selinuxfs filesystem.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_unmount_fs',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:filesystem unmount;
')

########################################
## <summary>
##	Get the attributes of the selinuxfs filesystem
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_getattr_fs',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:filesystem getattr;
')

########################################
## <summary>
##	Do not audit attempts to get the
##	attributes of the selinuxfs filesystem
## </summary>
## <param name="domain">
##	<summary>
##	Domain to not audit.
##	</summary>
## </param>
#
interface(`selinux_dontaudit_getattr_fs',`
	gen_require(`
		type security_t;
	')

	dontaudit $1 security_t:filesystem getattr;
')

########################################
## <summary>
##	Do not audit attempts to get the
##	attributes of the selinuxfs directory.
## </summary>
## <param name="domain">
##	<summary>
##	Domain to not audit.
##	</summary>
## </param>
#
interface(`selinux_dontaudit_getattr_dir',`
	gen_require(`
		type security_t;
	')

	dontaudit $1 security_t:dir getattr;
')

########################################
## <summary>
##	Search selinuxfs.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_search_fs',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:dir search_dir_perms;
')

########################################
## <summary>
##	Do not audit attempts to search selinuxfs.
## </summary>
## <param name="domain">
##	<summary>
##	Domain to not audit.
##	</summary>
## </param>
#
interface(`selinux_dontaudit_search_fs',`
	gen_require(`
		type security_t;
	')

	dontaudit $1 security_t:dir search_dir_perms;
')

########################################
## <summary>
##	Do not audit attempts to read
##	generic selinuxfs entries
## </summary>
## <param name="domain">
##	<summary>
##	Domain to not audit.
##	</summary>
## </param>
#
interface(`selinux_dontaudit_read_fs',`
	gen_require(`
		type security_t;
	')

	dontaudit $1 security_t:dir search_dir_perms;
	dontaudit $1 security_t:file read_file_perms;
')

########################################
## <summary>
##	Allows the caller to get the mode of policy enforcement
##	(enforcing or permissive mode).
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
## <rolecap/>
#
interface(`selinux_get_enforce_mode',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file read_file_perms;
')

########################################
## <summary>
##	Allow caller to set the mode of policy enforcement
##	(enforcing or permissive mode).
## </summary>
## <desc>
##	<p>
##	Allow caller to set the mode of policy enforcement
##	(enforcing or permissive mode).
##	</p>
##	<p>
##	Since this is a security event, this action is
##	always audited.
##	</p>
## </desc>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
## <rolecap/>
#
interface(`selinux_set_enforce_mode',`
	gen_require(`
		type security_t;
		attribute can_setenforce;
		bool secure_mode_policyload;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file rw_file_perms;
	typeattribute $1 can_setenforce;

	if(!secure_mode_policyload) {
		allow $1 security_t:security setenforce;

		ifdef(`distro_rhel4',`
			# needed for systems without audit support
			auditallow $1 security_t:security setenforce;
		')
	}
')

########################################
## <summary>
##	Allow caller to load the policy into the kernel.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_load_policy',`
	gen_require(`
		type security_t;
		attribute can_load_policy;
		bool secure_mode_policyload;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file rw_file_perms;
	typeattribute $1 can_load_policy;

	if(!secure_mode_policyload) {
		allow $1 security_t:security load_policy;

		ifdef(`distro_rhel4',`
			# needed for systems without audit support
			auditallow $1 security_t:security load_policy;
		')
	}
')

########################################
## <summary>
##	Allow caller to set the state of Booleans to
##	enable or disable conditional portions of the policy.  (Deprecated)
## </summary>
## <desc>
##	<p>
##	Allow caller to set the state of Booleans to
##	enable or disable conditional portions of the policy.
##	</p>
##	<p>
##	Since this is a security event, this action is
##	always audited.
##	</p>
##	<p>
##	This interface has been deprecated.  Please use
##	selinux_set_generic_booleans() or selinux_set_all_booleans()
##	instead.
##	</p>
## </desc>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
## <rolecap/>
#
interface(`selinux_set_boolean',`
	refpolicywarn(`$0($*) has been deprecated, use selinux_set_generic_booleans() instead.')
	selinux_set_generic_booleans($1)
')

########################################
## <summary>
##	Allow caller to set the state of generic Booleans to
##	enable or disable conditional portions of the policy.
## </summary>
## <desc>
##	<p>
##	Allow caller to set the state of generic Booleans to
##	enable or disable conditional portions of the policy.
##	</p>
##	<p>
##	Since this is a security event, this action is
##	always audited.
##	</p>
## </desc>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
## <rolecap/>
#
interface(`selinux_set_generic_booleans',`
	gen_require(`
		type security_t;
		bool secure_mode_policyload;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file rw_file_perms;

	if(!secure_mode_policyload) {
		allow $1 security_t:security setbool;

		ifdef(`distro_rhel4',`
			# needed for systems without audit support
			auditallow $1 security_t:security setbool;
		')
	}
')

########################################
## <summary>
##	Allow caller to set the state of all Booleans to
##	enable or disable conditional portions of the policy.
## </summary>
## <desc>
##	<p>
##	Allow caller to set the state of all Booleans to
##	enable or disable conditional portions of the policy.
##	</p>
##	<p>
##	Since this is a security event, this action is
##	always audited.
##	</p>
## </desc>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
## <rolecap/>
#
interface(`selinux_set_all_booleans',`
	gen_require(`
		type security_t;
		attribute boolean_type;
		bool secure_mode_policyload;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 boolean_type:file rw_file_perms;

	if(!secure_mode_policyload) {
		allow $1 security_t:security setbool;

		ifdef(`distro_rhel4',`
			# needed for systems without audit support
			auditallow $1 security_t:security setbool;
		')
	}
')

########################################
## <summary>
##	Allow caller to set SELinux access vector cache parameters.
## </summary>
## <desc>
##	<p>
##	Allow caller to set SELinux access vector cache parameters.
##	The allows the domain to set performance related parameters
##	of the AVC, such as cache threshold.
##	</p>
##	<p>
##	Since this is a security event, this action is
##	always audited.
##	</p>
## </desc>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
## <rolecap/>
#
interface(`selinux_set_parameters',`
	gen_require(`
		type security_t;
		attribute can_setsecparam;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file rw_file_perms;
	allow $1 security_t:security setsecparam;
	auditallow $1 security_t:security setsecparam;
	typeattribute $1 can_setsecparam;
')

########################################
## <summary>
##	Allows caller to validate security contexts.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
## <rolecap/>
#
interface(`selinux_validate_context',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file rw_file_perms;
	allow $1 security_t:security check_context;
')

########################################
## <summary>
##	Do not audit attempts to validate security contexts.
## </summary>
## <param name="domain">
##	<summary>
##	Domain to not audit.
##	</summary>
## </param>
## <rolecap/>
#
interface(`selinux_dontaudit_validate_context',`
	gen_require(`
		type security_t;
	')

	dontaudit $1 security_t:dir list_dir_perms;
	dontaudit $1 security_t:file rw_file_perms;
	dontaudit $1 security_t:security check_context;
')

########################################
## <summary>
##	Allows caller to compute an access vector.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
## <rolecap/>
#
interface(`selinux_compute_access_vector',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file rw_file_perms;
	allow $1 security_t:security compute_av;
')

########################################
## <summary>
##	Calculate the default type for object creation.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
## <rolecap/>
#
interface(`selinux_compute_create_context',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file rw_file_perms;
	allow $1 security_t:security compute_create;
')

########################################
## <summary>
##	Allows caller to compute polyinstatntiated
##	directory members.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_compute_member',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file rw_file_perms;
	allow $1 security_t:security compute_member;
')

########################################
## <summary>
##	Calculate the context for relabeling objects.
## </summary>
## <desc>
##	<p>
##	Calculate the context for relabeling objects.
##	This is determined by using the type_change
##	rules in the policy, and is generally used
##	for determining the context for relabeling
##	a terminal when a user logs in.
##	</p>
## </desc>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_compute_relabel_context',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file rw_file_perms;
	allow $1 security_t:security compute_relabel;
')

########################################
## <summary>
##	Allows caller to compute possible contexts for a user.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_compute_user_contexts',`
	gen_require(`
		type security_t;
	')

	allow $1 security_t:dir list_dir_perms;
	allow $1 security_t:file rw_file_perms;
	allow $1 security_t:security compute_user;
')

########################################
## <summary>
##	Unconfined access to the SELinux kernel security server.
## </summary>
## <param name="domain">
##	<summary>
##	Domain allowed access.
##	</summary>
## </param>
#
interface(`selinux_unconfined',`
	gen_require(`
		attribute selinux_unconfined_type;
	')

	typeattribute $1 selinux_unconfined_type;
')