580f36e436
Libass commit f08f8ea5 (between 0.16 and 0.17) changed how PlayResX affects some aspects of rendering. The libass change fixes a VSFilter compatibility issue which existed for about two decades, and there are no libass plans to support the previous behavior, so ultimately we have to adjust the mpv code, and we can't guarantee to restore the old behavior in all cases. Starting at this commit, vector drawing coords, font spacing, border and shadow widths are all affected by PlayResX (specifically, by the aspect), while previously they were unaffected by PlayResX. This changed converted sub border and shadow widths in mpv, because ffmpeg generates the ass with fixed PlayResX of 384 (aspect of 4:3), and with libass 0.17, if this doesn't match the display aspect, then borders and shadow were too wide - because most clips aspect is more than 4:3. The fact that ffmpeg uses fixed PlayResX of 384 could be considered an issue, but for now we have no control over it, and ffmpeg doesn't have the video resolution when it converts an srt source to ass. So here we adjust PlayResX accordingly so that border/shadows are now rendered with correct width. However, regardless of that commit, changing PlayResX also affects the margin value, so to compensate, we adjust sub-margins-x too. According to libass devs, this should cover basic srt-to-ass conversion by ffmpeg to work correctly with libass 0.17. However, there could be srt extensions which use more complex ass, and/or ffmpeg conversion of other sub formats (such as aribb24, aribcaption and movtext), where more things need adjustments. As of now we don't know what these are, and so we don't really know what else might remain broken or get broken. |
||
|---|---|---|
| .github | ||
| audio | ||
| ci | ||
| common | ||
| demux | ||
| DOCS | ||
| etc | ||
| filters | ||
| generated | ||
| input | ||
| libmpv | ||
| misc | ||
| options | ||
| osdep | ||
| player | ||
| stream | ||
| sub | ||
| ta | ||
| test | ||
| TOOLS | ||
| video | ||
| waftools | ||
| .editorconfig | ||
| .gitignore | ||
| bootstrap.py | ||
| Copyright | ||
| LICENSE.GPL | ||
| LICENSE.LGPL | ||
| meson_options.txt | ||
| meson.build | ||
| mpv_talloc.h | ||
| README.md | ||
| RELEASE_NOTES | ||
| VERSION | ||
| version.py | ||
| wscript | ||
| wscript_build.py | ||
mpv
- External links
- Overview
- System requirements
- Downloads
- Changelog
- Compilation
- Release cycle
- Bug reports
- Contributing
- License
- Contact
External links
Overview
mpv is a free (as in freedom) media player for the command line. It supports a wide variety of media file formats, audio and video codecs, and subtitle types.
There is a FAQ.
Releases can be found on the release list.
System requirements
- A not too ancient Linux, Windows 7 or later, or OSX 10.8 or later.
- A somewhat capable CPU. Hardware decoding might help if the CPU is too slow to
decode video in realtime, but must be explicitly enabled with the
--hwdecoption. - A not too crappy GPU. mpv's focus is not on power-efficient playback on
embedded or integrated GPUs (for example, hardware decoding is not even
enabled by default). Low power GPUs may cause issues like tearing, stutter,
etc. The main video output uses shaders for video rendering and scaling,
rather than GPU fixed function hardware. On Windows, you might want to make
sure the graphics drivers are current. In some cases, ancient fallback video
output methods can help (such as
--vo=xvon Linux), but this use is not recommended or supported.
Downloads
For semi-official builds and third-party packages please see mpv.io/installation.
Changelog
There is no complete changelog; however, changes to the player core interface are listed in the interface changelog.
Changes to the C API are documented in the client API changelog.
The release list has a summary of most of the important changes on every release.
Changes to the default key bindings are indicated in restore-old-bindings.conf.
Compilation
Compiling with full features requires development files for several
external libraries. One of the two build systems supported by mpv is required:
meson or waf. Meson
can be obtained from your distro or PyPI. Waf can be downloaded by using the
./bootstrap.py script. It will get the latest version of waf that was tested
with mpv. Some documentation about the differences between the build systems are
located in build-system-differences.
Note: Building with waf is considered deprecated and will be removed in the future.
Meson
After creating your build directory (e.g. meson setup build), you can view a list
of all the build options via meson configure build. You could also just simply
look at the meson_options.txt file. Logs are stored in meson-logs within
your build directory.
Example:
meson setup build
meson compile -C build
meson install -C build
Waf
For a list of the available build options use ./waf configure --help. If
you think you have support for some feature installed but configure fails to
detect it, the file build/config.log may contain information about the
reasons for the failure.
NOTE: To avoid cluttering the output with unreadable spam, --help only shows
one of the two switches for each option. If the option is autodetected or
enabled by default, the --disable-*** switch is printed; if the option is
disabled by default, the --enable-*** switch is printed. Either way, you can
use --enable-*** or --disable-** regardless of what is printed by --help.
To build the software you can use ./waf build: the result of the compilation
will be located in build/mpv. You can use ./waf install to install mpv
to the prefix after it is compiled.
Example:
./bootstrap.py
./waf configure
./waf
./waf install
Essential dependencies (incomplete list):
- gcc or clang
- X development headers (xlib, xrandr, xext, xscrnsaver, xinerama, libvdpau, libGL, GLX, EGL, xv, ...)
- Audio output development headers (libasound/ALSA, pulseaudio)
- FFmpeg libraries (libavutil libavcodec libavformat libswscale libavfilter and either libswresample or libavresample)
- zlib
- iconv (normally provided by the system libc)
- libass (OSD, OSC, text subtitles)
- Lua (optional, required for the OSC pseudo-GUI and youtube-dl integration)
- libjpeg (optional, used for screenshots only)
- uchardet (optional, for subtitle charset detection)
- nvdec and vaapi libraries for hardware decoding on Linux (optional)
Libass dependencies (when building libass):
- gcc or clang, yasm on x86 and x86_64
- fribidi, freetype, fontconfig development headers (for libass)
- harfbuzz (required for correct rendering of combining characters, particularly for correct rendering of non-English text on OSX, and Arabic/Indic scripts on any platform)
FFmpeg dependencies (when building FFmpeg):
- gcc or clang, yasm on x86 and x86_64
- OpenSSL or GnuTLS (have to be explicitly enabled when compiling FFmpeg)
- libx264/libmp3lame/libfdk-aac if you want to use encoding (have to be explicitly enabled when compiling FFmpeg)
- For native DASH playback, FFmpeg needs to be built with --enable-libxml2 (although there are security implications, and DASH support has lots of bugs).
- AV1 decoding support requires dav1d.
- For good nvidia support on Linux, make sure nv-codec-headers is installed and can be found by configure.
Most of the above libraries are available in suitable versions on normal Linux distributions. For ease of compiling the latest git master of everything, you may wish to use the separately available build wrapper (mpv-build) which first compiles FFmpeg libraries and libass, and then compiles the player statically linked against those.
If you want to build a Windows binary, you either have to use MSYS2 and MinGW, or cross-compile from Linux with MinGW. See Windows compilation.
Release cycle
Every other month, an arbitrary git snapshot is made, and is assigned a 0.X.0 version number. No further maintenance is done.
The goal of releases is to make Linux distributions happy. Linux distributions are also expected to apply their own patches in case of bugs and security issues.
Releases other than the latest release are unsupported and unmaintained.
See the release policy document for more information.
Bug reports
Please use the issue tracker provided by GitHub to send us bug reports or feature requests. Follow the template's instructions or the issue will likely be ignored or closed as invalid.
Using the bug tracker as place for simple questions is fine but IRC is recommended (see Contact below).
Contributing
Please read contribute.md.
For small changes you can just send us pull requests through GitHub. For bigger changes come and talk to us on IRC before you start working on them. It will make code review easier for both parties later on.
You can check the wiki or the issue tracker for ideas on what you could contribute with.
License
GPLv2 "or later" by default, LGPLv2.1 "or later" with --enable-lgpl.
See details.
History
This software is based on the MPlayer project. Before mpv existed as a project, the code base was briefly developed under the mplayer2 project. For details, see the FAQ.
Contact
Most activity happens on the IRC channel and the github issue tracker.
- GitHub issue tracker: issue tracker (report bugs here)
- User IRC Channel:
#mpvonirc.libera.chat - Developer IRC Channel:
#mpv-develonirc.libera.chat