The binding is similar to the tv-binding, just with capital letters.
Switching the dvb-channel-name property compared to dvb-channel
means the channel-name is shown on-screen when switching instead of
"dvb-channel (error)" otherwise,
and switching anyways happens without changing the card.
In particular, the player inserts af_scaletempo by default now when
changing speed, so the suggestion to add this was missleading and
counter-productive.
window-scale is now mapped to Alt+0 etc. by default (although these
bindings just use "set", not "cycle-values").
colormatrix can't be cycled anymore (would require using vf_format).
Drop d for toggling framedrop. Toggling this is way too special to be at
such a prominent place, and in fact I believe toggling it is pointless.
Remap deinterlacing from D to d. It's relatively useful and non-
destructive.
As suggested in #973 (almost).
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
This is an unfortunate fact of life. Maybe making this the default
wasn't such a good idea after all.
Also update etc/example.conf. It used an obsolete alias for "auto".
The "osd" command cycles between 4 states (OSD level 0-3), which is
probably confusing and inconvenient. OSD levels 0 and 2 are rarely
needed. I would claim there is normally not much of a need to completely
disable OSD by setting level 0 during playback. Level 2 is just slightly
less information than level 3, and I'm not sure why it exists at all.
Change it so that it toggles between level 3 and 1. Note that this
ignores the default OSD level. If the default is 3, the first use of
this key will set it to 3 again. Just assume 1 is the default. If
someone complains, this could be improved.
Wnile it seems quite logical to me that commands use _ as word
separator, while properties use -, I can't really explain the
difference, and it tends to confuse users as well. So always
prefer - as separator for everything.
Using _ still works, and will probably forever. Not doing so would
probably create too much chaos and confusion.
This was mapped to a broken command, so it did nothing but printing an
error message. The intended binding (cycling OSD level) doesn't seem to
useful either, so just drop it.
The standard say:
NoDisplay means "this application exists, but don't display it in the menus".
Now that --force-window --idle is enabled, we can remove it.
Closes#1755.
This can be set to select a number of default settings that help mpv
pretend that it has a GUI.
I haven't decided yet whether I really want to use the profile mechanism
for this. There are a number of weird details that are not so easy to
handle with profiles, such as disabling pseudo-gui mode again (you can't
unset profiles directly). So this might change. But for now it will do.
There also should be a better way to store builtin profiles.
Unfortunately, the old crappy MPlayer config file parser needs on-disk
files, so just use a bunch of function calls for now.
Why did this exist in the first place? Other than being completely
useless, this even caused some regressions in the past. For example,
there was the case of a laptop exposing its accelerometer as joystick
device, which led to extremely fun things due to the default mappings of
axis movement being mapped to seeking.
I suppose those who really want to use their joystick to control a media
player (???) can configure it as mouse device or so.
This gets rid of the need for a second (or more) parameters; instead it
can be all in one parameter. The (now) redundant parameter is still
parsed for compatibility, though.
The way the flags make each other conflict is a bit tricky: they have
overlapping bits, and the option parser disallows setting already set
bits.
Apparently broken files are popular enough that this is still needed.
It's relatively often asked on the IRC channel, and I also found it on
the archwiki mpv page.
The list of aspect ratios is taken from the archwiki page, with "16:10"
removed (because I doubt there are actually files with this aspect
ratio).
playlist-pos is 0-based, but everyone thinks it's 1-based. Stupid crap.
(The "not the same as MPlayer" refers to a playlist manipulation command
that doesn't exist anymore in mpv.)
CC: @mpv-player/stable
This is for users who don't like changes. I'm hoping it will make the
process of cleaning up key bindings less bumpy.
It should be mentioned in the release notes of the next release.
It's just confusing; users are encouraged to edit input.conf instead
(changing the argument to the "add" command).
Update input.conf to keep the old behavior.
Apparently making ESC exit fullscreen mode is the more popular
convention compared to ESC quitting the program.
It was also concluded that ESC should do nothing when the windows is
already in normal state.
See discussion in #973.
"#" starts a comment, so the # key needs to be handled specially.
MPlayer has the same issue, but its input.conf is wrong. Or at least I
think it's wrong; looking at the MPlayer code it's doubtful they somehow
special-case and handle this.
Add the --cache-secs option, which literally overrides the value of
--demuxer-readahead-secs if the stream cache is active. The default
value is very high (10 seconds), which means it can act as network
cache.
Remove the old behavior of trying to pause once the byte cache runs
low. Instead, do something similar wit the demuxer cache. The nice
thing is that we can guess how many seconds of video it has cached,
and we can make better decisions. But for now, apply a relatively
naive heuristic: if the cache is below 0.5 secs, pause, and wait
until at least 2 secs are available.
Note that due to timestamp reordering, the estimated cached duration
of video might be inaccurate, depending on the file format. If the
file format has DTS, it's easy, otherwise the duration will seemingly
jump back and forth.
Some of them changed semantics or got renamed.
Note that the replacements in the example.conf are not necessarily the
equivalents of the replaced options.
Changing audio-delay is probably not needed.
Changing balance "works", but not as expected (sets up a pan matrix to
change left/right contributions to each other, rather than changing the
relative volumes of each channel).
I expect that the rest are not in use by anyone.
Instead of using a regex to match names to be exported from the libmpv
dynamic shared library, use a libmpv.def file, which lists all exported
functions explicitly.
This reduces the platform specifics in syms.py. I'm not sure if the
separate compile_sym task is still needed (it could probably be
collapsed, which would concentrate the platform specifics into one
place).
Nobody uses 'c' (except accidentally) - remove.
Everyone agrees that OSD level cycling on 'o' is dumb, so map it to
show_progress instead. Cycling the OSD level is now available on 'O'.
No reason to ummap 'P' yet.
Also see issue #973.
Convert all these commands to properties. (Except tv_last_channel, not
sure what to do with this.) Also, internally, don't access stream
details directly, but dispatch commands with stream ctrls.
Many of the new properties are a bit strange, because they're write-
only. Also remove some OSD output these commands produced, because I
couldn't be bothered to port these.
In general, this makes everything much cleaner, and will also make it
easier to e.g. move the demuxer to its own thread.
Don't bother updating input.conf, but changes.rst documents how old
commands map to the new ones.
Mostly untested, due to lack of hardware.
The window close button is usually mapped to the CLOSE_WIN pseudo-key.
Until now, --input-test treated this pseudo-key like any other key (like
the rest of the input handling code), so you couldn't close the window
in this mode. The manpage had silly instructions and warnings how to
deal with this.
Just always quit when CLOSE_WIN is received, and improve the
instructions.
This might be helpful if we ever want cascading config files. Also, we
will probably need it if we change the default input.conf bindings, and
want to provide compatibility input.conf files.
This is probably useful.
Note that this includes a small, stupid hack to prevent loading of the
config file if vf_lavfi is not available. The profile by default uses
vf_lavfi, and the config parser will output errors if vf_lavfi is not
available.
As another caveat, we install the example profile even if encoding is
disabled (though we don't load it, since this would print errors).
Currently KDE will copy a media file into a temporary folder instead of
trying to stream it if a KIO slave location file is started. This change
will tell KDE to make mpv try to directly play the file. Perhaps the
proper flags should be added according to the individual enabled
features of the build but I suggest that be for the future.
Signed-off-by: wm4 <wm4@nowhere>
This readds a more or less completely new dvdnav implementation, though
it's based on the code from before commit 41fbcee. Note that this is
rather basic, and might be broken or not quite usable in many cases.
Most importantly, navigation highlights are not correctly implemented.
This would require changes in the FFmpeg dvdsub decoder (to apply a
different internal CLUT), so supporting it is not really possible right
now. And in fact, I don't think I ever want to support it, because it's
a very small gain for a lot of work. Instead, mpv will display fake
highlights, which are an approximate bounding box around the real
highlights.
Some things like mouse input or switching audio/subtitles stream using
the dvdnav VM are not supported.
Might be quite fragile on transitions: if dvdnav initiates a transition,
and doesn't give us enough mpeg data to initialize video playback, the
player will just quit.
This is added only because some users seem to want it. I don't intend to
make mpv a good DVD player, so the very basic minimum will have to do.
How about you just convert your DVD to proper video files?
The mpv.desktop file is taken from the Arch package [1]. It appears to
be based on the mplayer2 git mplayer.desktop file (e.g. very similar
MimeType field), with minor modifications applied by Arch package
maintainers.
Note that for now, this doesn't show a terminal (Terminal=false), which
might not always be ideal. For example, if the file is audio only, or
if VO initialization fails for some reason, mpv will run in the
background and play audio without showing a window. But users prefer
running it without terminal, and don't want to play audio files with
it.
Maybe a --force-window option will be added in the future, which would
always create a VO window, and compensate for these issues.
[1] https://aur.archlinux.org/packages/mpv-git/
Remove options which are too obscure and most likely not very useful in
general, or update them to something more modern. Add some comments
about how configuration files work in general.
This affects MOUSE_MOVE and MOUSE_LEAVE. Both are needed internally
(such as for the OSC), but not really useful for input.conf. Since the
warning has the purpose of notifying the user that a key is unmapped and
what key name to use for setting up a binding in input.conf, the warning
is rather useless in this case. It's also annoying in combination with
the
--no-input-default-bindings option, since that removes the default
bindings to "ignore" for these keys.
The png file added to etc/ are taken from the link mentioned in commit
303096b, except that they have been converted to 16 bit, sRGB (with
color profile info dropped, if there was one), and transparent pixels
reset for better compression.
The file x11_icon.bin is generated by gen-x11-icon.sh. I'm adding it to
the git repo directly, because the script requires ImageMagick, and we
don't want to make building even more complicated.
The way how this is done is basically a compromise between effort
required in x11_common.c and in gen-x11-icon.sh. Ideally, x11_icon.bin
would be directly in the format as required by _NET_WM_ICON, but trying
to write the binary width/height values from shell would probably be a
nightmare, so here we go.
The zlib code in x11_common.c is lifted from demux_mkv.c, with some
modifications (like accepting a gzip header, because I don't know how to
make gzip write raw compressed data).
I suspect most users will just copy etc/input.conf when they want to
remap some default bindings. But usually this means the user even copies
bindings he doesn't care about, and it's better if the user maps only
the bindings in his input.conf the user intends to remap.
Comment all bindings in etc/input.conf. Since this file also defines the
builtin defaults and is baked into the mpv binary, we have to do
something to get them anyway, even though they are commented. Do this by
having input.c "uncomment" the bindings in the baked in input.conf. (Of
course this is done only for the builtin config, not configs loaded from
disk.)
I would like to thank Chris Ward (@tenzerothree, http://tenzerothree.com/) for
working on the art for these icons and bringing some eye candy to the project.
The PSDs made by Chris are available on our Dropbox [1], along with the exports
I made to create OSX and Windows icons. The PSDs are almost completly vector
and all the resolutions look really similar, except the 16px favicon which was
handcrafted to look better and more recognizeable on the smaller pixel budget.
For Mac OS X the icons were created using iconutils on the PNGs iconsets
exported from the PSDs. These even support retina resolutions (except 512@2x).
For Windows the .ico file was created with imagemagick. The included images
are 16px, 24px, 32px, 48px 64px, 256px. These are the resolutions listed on
MSDN for supporting Windows XP [2] and Windows versions based on Aero [3].
Only 32bit PNGs were used since it is 2013.
For Linux nothing changed yet, even though @wm4 talked about using the PNGs
directly there. This will probably be dealt with in a later commit.
[1]: https://www.dropbox.com/sh/yelfoj9tbft7o06/A8vOT6JKaG
[2]: http://msdn.microsoft.com/en-us/library/ms997636.aspx
[3]: http://msdn.microsoft.com/en-us/library/aa511280.aspx
Change how the HW decoding stuff is organized, the way it's initialized
in particular. Instead of duplicating the list of supported codecs for
hwaccel decoders, add a probe function which allows each decoder to
report whether it supports a given codec.
Add an "auto" choice to the --hwdec option, which automatically enables
hardware decoding if libavcodec and/or the VO supports it.
What mpv prints on the terminal changes a bit. Now it will just print
a single line whether hw decoding is used or not (and nothing at all if
no hw decoding at all was requested). The pretty violent fallback from
hw decoding to software decoding is still quite verbose and evil-looking
though.