This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
vo_opengl used to have it as sub-option, which made it very hard to pass
down option values to backends in a generic way (even if these options
were completely backend-specific). For --opengl-dcomposition we used a
VOFLAG to deal with this. Fortunately, sub-options are gone, and we can
just add it as global option.
Move the option to context_angle.c and add it as global option. I
thought about adding a mechanism to let backends declare options, which
would get magically picked up my m_config instead of having to add them
to the global option list manually (similar to VO vo_driver.options),
but decided against this complexity just for 1 or 2 backends. Likewise,
it could have been added as a single option to avoid the boilerplate of
an option struct, but then again there are probably going to be more
angle suboptions, and it's cleaner.
Since for mpv CLI, the player state is a singleton, full prefetching is
a bit tricky. We do it only on the demuxer layer.
The implementation reuses the old "open thread". This means there is
significant potential for regressions even if the new option is not
used. This is made worse by the fact that I barely tested this code.
The generic mpctx_run_reentrant() wrapper is also removed - this was its
only user, and its remains become part of the new implementation.
Introduce the --opengl-hwdec-interop option, which replaces
--hwdec-preload. The new option allows explicit selection of the interop
backend.
This is relatively complex, and I would have preferred not to add this,
but it's probably useful to debug certain problems. In exchange, the
"new" option documents that pretty much any but the simplest use of it
will not be forward compatible.
this replaces the old fullscreen with the native
macOS fullscreen. additional the
--fs-black-out-screens was removed since the new
API doesn't support it in a way the old one did.
it can possibly be re-added if done manually.
Fixes#2857#3272#1352#2062#3864
Long planned. Leads to some sanity.
There still are some rather gross things. Especially g_groups is ugly,
and a hack that can hopefully be removed. (There is a plan for it, but
whether it's implemented depends on how much energy is left.)
Deactivating this options makes it possible to
circumvent the default OS X behavior of using
points. Windows on HiDPI resolutions won't open
in double the size anymore and videos are display
in their native resolution when windowed.
Fixes#3716
- Change connector selection to accept human readable names (such as
eDP-1, HDMI-A-2) rather than arbitrary numbers.
- Change GPU selection to accept GPU number rather than device paths.
- Merge connector and GPU selection into one --drm-connector.
- Add support for --drm-connector=help.
- Add support for --drm-* in EGL backend.
- Refactor KMS; reduce state sharing across drm_common.
Rename the text subtitle options from --sub-text- to --sub-
and --ass- options to --sub-ass-.
The intention is to common sub options to prefixed --sub-
and special ASS option be seen as a special version of sub options.
The OSD options that work like the --sub- options are still named
--osd-.
Man page updated including a short note about renamed --sub-text-*
and --ass-* options to --sub-* and --sub-ass-*.
Seems like this confused users quite often.
Instead of --profile=pseudo-gui, --player-operation-mode=pseudo-gui now
has to be used to invoke pseudo GUI mode. The old way still works, and
still behaves in the old way.
A recent change merged the window-scaler option and property, but forgot
that the option is float for some reason, while the property uses
double. This led to undefined behavior. Fix it by changing the option
to double too.
Don't access MPOpts directly, and always use the new m_config.h
functions for accessing them in a thread-safe way.
The goal is eventually removing the mpv_global.opts field, and the
demuxer/stream-layer specific hack that copies MPOpts to deal with
thread-safety issues.
This moves around a lot of options. For one, we often change the
physical storage location of options to make them more localized,
but these changes are not user-visible (or should not be). For
shared options on the other hand it's better to do messy direct
access, which is worrying as in that somehow renaming an option
or changing its type would break code reading them manually,
without causing a compilation error.
And introduce a global option which does this. Or more precisely, this
deprecates the global wasapi and coreaudio options, and adds a new one
that merges their functionality. (Due to the way the sub-option
deprecation mechanism works, this is simpler.)
Instead of requiring each VO or AO to manually add members to MPOpts and
the global option table, make it possible to register them automatically
via vo_driver/ao_driver.global_opts members. This avoids modifying
options.c/options.h every time, including having to duplicate the exact
ifdeffery used to enable a driver.
Whitelisting supported codecs is (probably) still better than just
allowing everything, given the weird FFmpeg API. I'm also assuming
Libav doesn't even have the codec ID, but I didn't check.
Also add a --teletext-page option, since otherwise it decodes every
teletext page and shows them in succession.
And yes, we can't use av_opt_set_int() - instead we have to set it as
string. Because FFmpeg's option system is terrible.
vo_opengl sub-option were always rather annoying to handle. It seems
better to make them global options instead. This is simpler and easier
to use. The only disadvantage we are aware of is that it's not clear
that many/all of these new global options work with vo_opengl only.
--vo=opengl-hq is also deprecated.
There is extensive compatibility with the old behavior. One exception is
that --vo-defaults will not apply to opengl-hq (though with opengl it
still works). vo-cmdline is also dysfunctional and will be removed in a
following commit.
These changes also affect opengl-cb.
The update mechanism is still rather inefficient: it requires syncing
with the VO after each option change, rather than batching updates.
There's also no granularity (video.c just updates "everything", and if
auto-ICC profiles are enabled, vo_opengl.c will fetch them on each
update).
Most of the manpage changes were done by Niklas Haas <git@haasn.xyz>.
This is still rather basic.
run_reconfig() and run_control() update the options because it's needed
for panscan (and other video scaling options), and fullscreen, border,
ontop updates. In the old model, these options could be accessed only
while both playback thread and VO threads were locked (i.e. during
synchronous calls like vo_control()), so this should be sufficient in
order not to miss any updates. In the future, a more fine-grained update
mechanism could be added to handle these updates "exactly".
x11_common.c contains an evil hack, as I see no reasonable way to handle
this properly. The VO thread can't "lock" the main thread, so this is
not simple.
Now options are accessible through the property list as well, which
unifies them to a degree.
Not all options support runtime changes (meaning affected components
need to be restarted for the options to take effects). Remove from the
manpage those properties which are cleanly mapped to options anyway.
From the user-perspective they're just options available through the
property interface.
Just a minor refactor along the planned option change. This commit will
make it easier to update (i.e. copy) the VO options without copying
_all_ options. For now, behavior should be equivalent, though.
(The VO options were put into a separate struct quite early - when all
global variables were removed from the source code. It wasn't clear
whether the separate struct would have any actual purpose, but it seems
it will now. Awesome, huh.)
Normally, OSD can be disabled with --osd-level=0. But this also disables
terminal OSD, and some users want _only_ the terminal OSD. Add
--video-osd=no, which essentially disables the video OSD.
Ideally, it should probably be possible to control terminal and video
OSD levels independently, but that would require separate OSD timers
(and other state) for both components, so don't do it. But because the
current situation isn't too ideal, add a threat to the manpage that
might be changed in the future.
Fixes#3387.
The --image-display-duration option controls how long an image is
displayed. It's also possible to display the image forever (until manual
user interaction stops playback).
With this, the core drops the old method to "drain" video (i.e. waiting
for the last frame duration on end of playback). Instead, we reuse
MPContext.time_frame. The old mechanism was disabled for non-images
anyway.
Fixes#3425.
This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
mixer.c didn't really deserve to be separate anymore, as half of its
contents were unnecessary glue code after recent changes. It also
created a weird split between audio.c and af.c due to the fact that
mixer.c could insert audio filters. With the code being in audio.c
directly, together with other code that unserts filters during runtime,
it will be possible to cleanup this code a bit and make it work like the
video filter code.
As part of this change, make the balance code work like the volume code,
and add an option to back the current balance value. Also, since the
balance semantics are unexpected for most users (panning between the
audio channels, instead of just changing the relative volume), and there
are some other volumes, formally deprecate both the old property and the
new option.
Drop the code for switching the volume options and properties between
af_volume and AO volume controls. interface-changes.rst mentions the
changes in detail.
Do this because this was exceedingly complex and had other problems as
well. It was also very hard to test. It's just not worth the trouble.
Some leftovers like AOCONTROL_HAS_PER_APP_VOLUME will be removed at a
later point.
Fixes#3322.
Add --taskbar-progress command line option and property which controls taskbar
progress indication rendering in Windows 7+. This option is on by default and
can be toggled during playback.
This option does not affect the creation process of ITaskbarList3. When the
option is turned off the progress bar is just hidden with TBPF_NOPROGRESS.
Closes#2535
Flag that is set by default. Reseting it will result in mpv trying to fit
client area with video instead of the whole window with border and
decorations on the screen.
Marked as (Windows only) for now until it's implemented on other platforms.
See --lavfi-complex option.
This is still quite rough. There's no support for dynamic configuration
of any kind. There are probably corner cases where playback might freeze
or burn 100% CPU (due to dataflow problems when interaction with
libavfilter).
Future possible plans might include:
- freely switch tracks by providing some sort of default track graph
label
- automatically enabling audio visualization
- automatically mix audio or stack video when multiple tracks are
selected at once (similar to how multiple sub tracks can be selected)
This is probably the 3rd time the user-visible behavior changes. This
time, switch back because not normalizing seems to be the more expected
behavior from users.
Requested. It works like --sub-paths. This will also load audio files
from a "audio" sub directory in the config file (because the same code
as for subtitles is used, and it also had such a feature).
Fixes#2632.
Most of this is explained in the DOCS additions.
This gives us slightly more sanity, because there is less interaction
between the various parts. The goal is getting rid of the video_offset
entirely.
The simplification extends to the user API. In particular, we don't need
to fix missing parts in the API, such as the lack for a seek command
that seeks relatively to the start time. All these things are now
transparent.
(If someone really wants to know the real timestamps/start time, new
properties would have to be added.)
Useless. Sometimes it might be useful to make some extremely broken
files work, but on the other hand --no-correct-pts is sufficient for
these cases.
While we still need some of the code for AVI, the "auto" mode in
particular inflated the size of the code.
The manpage entry explains this.
(Maybe this option could be always enabled and removed. I don't quite
remember what valid use-cases there are for just disabling audio
entirely, other than that this is also needed for audio decoder init
failure.)
The vf_format suboption is replaced with --video-output-levels (a global
option and property). In particular, the parameter is removed from
mp_image_params. The mechanism is moved to the "video equalizer", which
also handles common video output customization like brightness and
contrast controls.
The new code is slightly cleaner, and the top-level option is slightly
more user-friendly than as vf_format sub-option.
If this mode is enabled, the player tries to strictly synchronize video
to display refresh. It will adjust playback speed to match the display,
so if you play 23.976 fps video on a 24 Hz screen, playback speed is
increased by approximately 1/1000. Audio wll be resampled to keep up
with playback.
This is different from the default sync mode, which will sync video to
audio, with the consequence that video might skip or repeat a frame once
in a while to make video keep up with audio.
This is still unpolished. There are some major problems as well; in
particular, mkv VFR files won't work well. The reason is that Matroska
is terrible and rounds timestamps to milliseconds. This makes it rather
hard to guess the framerate of a section of video that is playing. We
could probably fix this by just accepting jittery timestamps (instead
of explicitly disabling the sync code in this case), but I'm not ready
to accept such a solution yet.
Another issue is that we are extremely reliant on OS video and audio
APIs working in an expected manner, which of course is not too often
the case. Consequently, the new sync mode is a bit fragile.
Add --demuxer-max-packets and --demuxer-max-bytes, which control the
maximum size of the packet queue. These can be helpful to avoid
excessive memory usage.
Memory usage is the reason why there's a limit in the first place. If a
file is more or less broken, and audio and video don't line up, the
decoders will fill up the packet queue trying to read more audio or
video, and the maximum sizes are required to avoid unbounded memory
allocation. Being able to override the maximum sizes is useful; either
for restricting memory usage further, or enlarging the sizes when
attempting to play various broken files.
Remove --demuxer-readahead-packets and --demuxer-readahead-bytes. These
were a bit useless. They could force a minimum packet queue size, but
controlling the queue size with --demuxer-readahead-secs is much nicer.
It's fairly certain nobody ever used these options.
Allow setting an arbitrary amount, instead of the fixed 50%.
This is nto striclty backwards compatible. The defaults don't change,
but the --cache/--cache-default options now set the readahead portion.
So in practice, users who configured this until now will see the
double amount of cache being used, _plus_ the 75MB default backbuffer
will be in use.
Probably makes users happy who want bitmap subtitles to show up in the
screen margins, and stops them from doing idiotic crap with vf_expand.
Fixes#2098.
Until now, if a stream wasn't seekable, but the stream cache was enabled
(--cache), we've enabled seeking anyway. The idea was that at least
short seeks would typically fall within the cache. And if not, the user
was out of luck and terrible things happened. In other words, it was
unreliable.
Be stricter about it and remove this behavior. Effectively, this will
for example disable seeking in piped data.
Instead of trying to be clever, add an --force-seekable option, which
will always enable seeking if the user really wants it.
See manpage additions. This is mainly useful for vo_opengl_cb, but can
also be applied to vo_opengl.
On a side note, gl_hwdec_load_api() should stop using a name string, and
instead always use the IDs. This should be cleaned up another time.
This provides a new method for enabling spdif passthrough. The old
method via --ad (--ad=spdif:ac3 etc.) is deprecated. The deprecated
method will probably stop working at some point.
This also supports PCM fallback. One caveat is that it will lose at
least 1 audio packet in doing so. (I don't care enough to prevent this.)
(This is named after the old S/PDIF connector, because it uses the same
underlying technology as far as the higher level protoco is concerned.
Also, the user should be renamed that passthrough is backwards.)
The options don't change, but they're now declared and used privately by
demux_mkv.c. This also brings with it a minor refactor of the subpreroll
seek handling - merge the code from playloop.c into demux_mkv.c. The
change in demux.c is pretty much equivalent as well.
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
This option allows the user to pass non-supported options directly to
youtube-dl, such as "--proxy URL", "--username USERNAME" and
'--password PASSWORD".
There is no sanity checking so it's possible to break things (i.e.
if you pass "--version" mpv exits with random JSON error).
Signed-off-by: wm4 <wm4@nowhere>
Now --ass-use-margins doesn't apply to normal subtitles anymore. This is
probably the inverse from the mpv behavior users expected so far, and
thus a breaking change, so rename the option, that the user at least has
a chance to lookup the option and decide whether the new behavior is
wanted or not.
The basic idea here is:
- plain text subtitles should have a certain useful defalt behavior,
like actually using margins
- ASS subtitles should never be broken by default
- ASS subtitles should look and behave like plaintext subtitles if
the --ass-style-override=force option is used
This also subtly changes --sub-scale-with-window and adds the --ass-
scale-with-window option. Since this one isn't so important, don't
bother with compatibility.
Make it accept "," as separator, instead of only ":". Do this by using
the key-value-list parser. Before this, the option was stored as a
string, with the option parser verifying that the option value as
correct. Now it's stored pre-parsed, although the log levels still
require separate verification and parsing-on-use to some degree (which
is why the msg-level option type doesn't go away).
Because the internal type changes, the client API "native" type also
changes. This could be prevented with some more effort, but I don't
think it's worth it - if MPV_FORMAT_STRING is used, it still works the
same, just with a different separator on read accesses.
In ancient times, this was needed because it was not default, and many
VOs had problems with it. But it was always default in mpv, and all VOs
are required to deal with it. Also, running --fixed-vo=no is not useful
and just creates weird corner cases. Get rid of it.
This allows getting the log at all with --no-terminal and without having
to retrieve log messages manually with the client API. The log level is
hardcoded to -v. A higher log level would lead to too much log output
(huge file sizes and latency issues due to waiting on the disk), and
isn't too useful in general anyway. For debugging, the terminal can be
used instead.
Fixes#1472.
(Maybe these options should have been named --autofit-max and
--autofit-min, but since --autofit-larger already exists, use
--autofit-smaller for symmetry.)
--sub-scale-by-window=no attempts to keep subs always at the same pixel
size.
The implementation is a bit all over the place, because it compensates
already done scaling by an inverse scale factor, but it will probably do
its job.
Fixes#1424. (The semantics and name of --sub-scale-with-window are
kept, and this adds a new option - the name is confusingly similar, but
it's actually analogue to --osd-scale-by-window.)
This attempts to increase user-friendliness by excluding useless tags.
It should be especially helpful with mp4 files, because the FFmpeg mp4
demuxer adds tons of completely useless information to the metadata.
Fixes#1403.
- --lua and --lua-opts change to --script and --script-opts
- 'lua' default script dirs change to 'scripts'
- DOCS updated
- 'lua-settings' dir was _not_ modified
The old lua-based names/dirs still work, but display a warning.
Signed-off-by: wm4 <wm4@nowhere>
Makeshift-solution for working around certain fontconfig issues.
With --use-text-osd=no, libass and fontconfig won't be initialized, and
fontconfig won't block everything with scanning for fonts.
It's passed with the '--format' option to youtube-dl.
If it isn't set, we don't pass '--format best' so that youtube-dl can
use the options from its configuration file.
Signed-off-by: wm4 <wm4@nowhere>
Probably needs to be polished a bit more. Also, might require a key
binding that can set/clear the loop points in a more intuitive way.
For now, something like this can be put into input.conf to use it:
ctrl+y set ab-loop-a ${time-pos} # set A
ctrl+x set ab-loop-b ${time-pos} # set B
ctrl+c set ab-loop-a no # clear (mostly)
Fixes#1241.
Make the changes started in commit c827ae5f more eloborate, and provide
an option to control the amount of data read before the seek-target. To
achieve this, rewrite the loop that finds the lowest still acceptable
target cluster. It is now searched by time instead of file position. The
behavior (both with and without preroll option) may be different from
before this change, although it shouldn't be worse.
The change demux_mkv_read_cues() fixes a bug: when seeking after playing
normally, the code would erroneously assume that durations are set. This
doesn't happen if the first operation after loading was a seek instead
of playback.
The main need I see for this is with libmpv - it would be confusing if
some application showed up as "mpv" on whateverthehell PulseAudio uses
it for (generally it does show up on various PA GUI tools).
Note that you can't pass .cue or .edl files to it, at least not yet.
Requested in context of allowing to specify custom chapters. For that
to work well, we probably need to add some sort of chapter metadata
pseudo-demuxer.
This is probably what libmpv users want; and it also improves error
reporting (or we'd have to add a way to communicate such mid-playback
failures as events).
No development activity (or even any sign of life) for almost a year.
A replacement based on youtube-dl will probably be provided before the
next mpv release. Ask on the IRC channel if you want to test.
Simplify the Lua check too: libquvi linking against a different Lua
version than mpv was a frequent issue, but with libquvi gone, no
direct dependency uses Lua, and such a clash is rather unlikely.
Apparently using the stream index is the best way to refer to the same
streams across multiple FFmpeg-using programs, even if the stream index
itself is rarely meaningful in any way.
For Matroska, there are some possible problems, depending how FFmpeg
actually adds streams. Normally they seem to match though.
This is the first of a series of commits that will change the Cocoa way in a
way that is easily embeddable inside parent views. To reach that point common
code must avoid referencing the parent NSWindow since that could be the host
application's window.
Apparently this is what users want. When playing with normal speed,
nothing is done. When playing slower than normal, resampling is used
instead, because scaletempo (which does the pitch correction) adds
too many artifacts.
This would play some silence in case video was slower than audio. If
framedropping is already enabled, there's no other way to keep A/V
sync, short of changing audio playback speed (which would give worse
results). The --audiodrop option inserted silence if there was more
than 500ms desync.
This worked somewhat, but I think it was a silly idea after all. Whether
the playback experience is really bad or slightly worse doesn't really
matter. There also was a subtle bug with PTS handling, that apparently
caused A/V desync anyway at ridiculous playback speeds.
Just remove this feature; nobody is going to use it anyway.
It's just confusing; users are encouraged to edit input.conf instead
(changing the argument to the "add" command).
Update input.conf to keep the old behavior.
