Today, we support resizing wayland windows when we detect a touch
event in a defined grab zone. As part of implementing
pseudo-decorations, we should have equivalent functionality for
mouse input. And if we detect support for actual decorations we
will not activate the grab zone as the decorations will provide this.
Use x11->opts instead of vo->opts. This doesn't matter currently, and
x11->opts is actually set to vo->opts. However, there's a chance that
either option access changes, or that the way backends integrate with
struct vo changes. This is just a preemptive change to make this less of
a mess, and it's generally a good idea to reduce accesses to struct vo
anyway.
The previous bunch of commits made this unnecessary, so this should be
a purely internal change with no user impact.
This may or may not open the way to future improvements. Even if not,
at least the property/option interaction should now be much less buggy.
Convert some remaining properties to work without the option-to-property
bridge. Behavior shouldn't change (except for the corner case that it
tries to reapply the new state when setting a property, while it used to
ignore redundant sets).
As it is the case with many of these changes, much of the code is not in
its final proper state yet, but is rather a temporary workaround. For
example, these "VO flag" properties should just be fully handled in the
VO backend. (Currently, the config or VO layers don't provide enough
mechanism yet as that all the backends like x11, win32, etc. could be
changed yet, but that's another refactoring mess for another time.)
Now nothing relies on this option-to-property bridge anymore, which
opens the way to even more refactoring, which eventually may result in
tiny improvements for the end user.
Until now, using a filter not in mpv's builtin filter list would assume
it's a libavfilter filter. If it wasn't, the option value was still
accepted, but creating the filter simply failed. But since this happens
after option parsing, so the result is confusing.
Improve this slightly by checking filter names. This will reject truly
unknown filters at option parsing time. Unfortunately, this still does
not check filter arguments. This would be much more complex, because
you'd have to create a dummy filter graph and allocate the filter. Maybe
another time.
The behavior is slightly different in a messy way. The change is in line
with the option-to-property bridge removal mentioned some commits ago
and thus is deemed necessary.
This attempted to restore the old filter chain if setting a new one at
runtime failed. This is not needed anymore, because changing the filter
chain is done in a "transactional" way now.
When changing filters at runtime (vf/af commands/properties), this could
crash due to a NULL pointer access. The code for comparing the old and
new option values (to detect changes) was simply buggy.
This function is dangerous, because it disables the already basic/week
type checking the option system has at all. I'm tend towards thinking
that all of its uses should be replaced.
This is preparation to get rid of the option-to-property bridge
(mp_on_set_option). This is a pretty insane thing that redirects
accesses to options to properties. It was needed in the ever ongoing
transition from something to... something else.
A good example for the need of this bridge is applying profiles at
runtime. This obviously goes through the config parser, but should also
make all changes effective, for which traditionally the property layer
is used.
There isn't much left that needs this bridge. This commit changes a
bunch of options (which also have a property implementation) to use
option change notifications instead. Many of the properties are still
left, but perform unrelated functions like OSD formatting.
This should be mostly compatible. There may be some subtle behavior
changes. For example, "hwdec" and "record-file" do not check for changes
anymore before applying them, so writing the current value to them
suddenly does something, while it was ignored before.
DVB changes untested, but should work.
These properties actually were removed/replaced, so there is no conflict
with the options of the same name anymore. For example, there is no
"audio-file" property anymore, but you still can set "audio-files" (and
--audio-file simply maps to --audio-files-append).
add_key_binding() makes the name argument optional (in weird Lua
fashion), which did not work if there were additional arguments. So
there is no way to avoid specifying a name while passing a rp argument.
Fix this, declare this way of skipping the argument as deprecated, and
allow passing name=nil as the preferred way to skip the name argument.
Handling the window with this function makes no sense, since windows
and kernels are not the same thing and don't share the same option list.
The only reason it's done is to make sure the char* points at the static
string rather than the dynamically allocated one, which we can do
manually in this function. Rewrite a bit for clarity/quality.
This is supposed to turn input.conf comments into inline documentation.
Whether this will be useful depends on whether there'll be a script
using this field.
This changes a small aspect of input.conf parsing fundamentally: this
attempts to strip comments/whitespace from the command string, which
will later be used to generate the command when a key binding is
executed. This should not have any negative effects, but there could be
unknown bugs. (For some reason, every command is parsed when input.conf
is parsed, but it still only stores the string for the command. I guess
that saves some minor amount of memory.)
Read-only information about all bindings. Somewhat hoping someone can
make a nice GUI-like overlay thing for it, which provides information
about mapped keys.
No reason to have this as bstr, just makes everything more complex.
Also clear mp_cmd.sender when it's copied. Otherwise it would be a
dangling pointer. Apparently it's never set to non-NULL in this
situation, but this is cleaner anyway.
Should be without consequences. I think this is less trouble, because
code frequently wants to add/remove bits for modifiers and key state
from key codes, and with this change you can't accidentally break it by
testing or removing bits from the old -1 value.
It did that because there was no other way. It used a lock-free ring
buffer, which does not support this. Use a "manual" ring buffer with
explicit locks instead, and drop messages from the start.
(We could have continued to use mp_ring, but it was already too late,
and although mp_ring is fine, using it for types other than bytes looked
awkward, and writing a ring buffer yet again seemed nicer. At least it's
not C++, where mp_ring would have been a template, and everything would
have looked like shit soup no matter what.)
In the referenced commit, I forgot about this part, and a client which
tried to use this was actually not woken up when needed.
(Also why the hell does the subject line of that commit say "removed"?)
Fixes: 8c2d73f112
Particularly for "any_unicode" mappings, so they don't have to
special-case keys like '#' and ' ', which are normally mapped to
symbolic names for input.conf reasons. (Though admittedly, this is a
pretty minor thing, since API users could map these manually.)
The key is never nil if it's invoked through the normal input path. The
key name could be "" if mp_cmd.key_name==NULL. This should not happen,
but there's no strong guarantee in input.c that it cannot happen, so
whatever.
The intended target for this is the mpv.repl script, which manually
added every single ASCII key as a separate key binding. This provides a
simpler mechanism, that will catch any kind of text input.
Due to its special nature, explicitly do not give a guarantee for
compatibility; thus the warning in input.rst.
I often watch sporting events. On many occasions I get files with the
same filename for each session. For example, for F1 I might have the
following directory structure:
F1/
FP1.mkv
FP2.mkv
FP3.mkv
Qualification.mkv
Race.mkv
Since usually one simply watches one race after the other, I usually
just rsync the new event's files over the old ones, so, for example,
Race.mkv will be replaced from the file for the last event with the file
from the new event.
One problem with this is that I like to use --resume-playback for other
kinds of media, so I have it on by default. That works great for, say, a
movie, but doesn't work so well with this scheme, because you can
trivially forget to pass --no-resume-playback on the command line and
end up 2 hours in, watching spoilers as the race results scroll down the
screen :-)
This patch adds a new option, --resume-playback-check-mtime, which
validates that the file's mtime hasn't changed since the watch_later
configuration was saved. It does this by setting the watch_later
configuration to have the same mtime as the file after it is saved.
Switching back and forth between checking mtime and not checking mtime
works fine, as we only choose whether to compare based on it, but we
update the watch_later configuration mtime regardless of its value.
These were a bad idea and are obscure. Scripting key mapping support
still uses them, but this is not relevant to scripting authors, because
the mpv provided helper code (defaults.lua) takes care of this. In
addition, the OSC uses a legacy form of this.
Hopefully, this input section stuff can be removed, and replaced by a
simpler mechanism.
As preparation for making repl.lua part of the core (maybe), add some
mechanisms which are supposed to improve its behavior.
Add a silent mode. Calling mpv_request_log_messages() with the log level
name prefixed with "silent:" will disable logging from the API user's
perspective. But it will keep the log buffer, and record new messages,
without returning them to the user. If logging is enabled again by
requesting the same log level without "silent:" prefix, the buffered log
messages are returned to the user at once. This is not documented,
because it's far too messy and special as that I'd want anyone to rely
on this behavior, but it will be perfectly fine for an internal script.
Another thing is that we record early startup messages. The goal is to
make the repl.lua script show option and config parsing file errors.
This works only with the special "terminal-default" log level.
In addition, reduce the "terminal-default" capacity to only 100 log
messages. If this is going to be enabled by default, it shouldn't use
too much resources.
This will just make it not work if mpv_request_log_messages() gets
extended to accept more names. Pass the argument without checking.
To keep the behavior the same (for whatever reasons, probably not
important), still raise an error if the libmpv API function returns an
error that the argument was bad.
(The check_loglevel() function is still used when the script _emits_ log
messages, which is different, and for which there is no API anyway.)
Philip Langdale
wm4
Niklas Haas
Aman Gupta
Avi Halachmi (:avih)
Chris Down
Michael Forney