This allows taking more than 99999 screenshots in a single session,
and also for the case when a sequence of 99999 screenshots
already exists on the filesystem.
mpv already has a bunch of software scaling utils. Instead of forcing
every VO to implement this, we can just grab the frame and scale it in
software in one central place. Fixes#11968.
We should always be trying hardware screenshots (VOCTRL_SCREENSHOT and
VOCTRL_SCREENSHOT_WIN) before software ones. Rearrange all the logic
here to hopefully make this clearer. The mode is passed to add_osd
(renamed since it will also be used to add the osd) which will be used
more in the next commit.
If --screenshot-tag-csp=no, then there won't be any color tags in the
output space, so PNG and JXL screenshots should be written as sRGB
rather than the native space of the input video.
This allows the logic in `convert_image` to fast-path if the image
params are equal. Without this check, the image params are basically
never equal, because that path goes through `mp_image_params_guess_csp`
while the `mp_image` itself does not.
Force it here for consistency across VOs.
Due to asynchronicity, we generally can't guarantee that a video frame
matches up with other events such as playback time change exactly (since
decoding, presentation, and property update all happen at different
times). This is a complaint in the referenced bug report, where
screenshot filenames in each-frame screenshot did not use the correct
timestamp, and instead was lagging behind by 1 frame.
But in this case, synchronicity was already pretty much forced with wait
calls. The only problem was that the playback time was updated at a
later time, which results in the observed 1 frame lag. Fix this by
moving the place where the screenshot is triggered in this mode.
Normal screenshots may still have the old problem. There is no effort
made to guarantee the timestamps absolutely line up, same as with the
OSD. (If you want a guarantee, you need to use a video filter, such as
libavfilter's drawtext. These will obviously use the proper timestamp,
instead of going through the somewhat asynchronous property etc. system
in the player frontend.)
Fixes: #7433
Lots of dumb crap to do... something. Instead of adding yet another dumb
helper, just use the main" sws_utils API in both callers. (Which,
unfortunately, has been duplicated for glorious webp screenshots,
despite the fact that webp is crap.)
Good part: can enable zimg for screenshots (as far as needed).
Bad part: uses "default" swscale parameters instead of HQ now.
The screenshot command has this weird behavior that it shows messages
both on terminal and OSD by default, but that a command prefix can be
used to disable the OSD message.
Move this mechanism to common code, and make this available to other
commands too (although as of this commit only the screenshot commands
use it).
This gets rid of the weird screenshot_ctx.osd field too, which was sort
of set on a command, and sometimes inconsistently restored after the
command.
Many asynchronous commands are potentially long running operations, such
as loading something from network or running a foreign process.
Obviously it shouldn't just be possible for them to freeze the player if
they don't terminate as expected. Also, there will be situations where
you want to explicitly stop some of those operations explicitly. So add
an infrastructure for this.
Commands have to support this explicitly. The next commit uses this to
actually add support to a command.
Basically reimplement the async behavior on top of the async command
code. With this, all screenshot commands are async, and the "async"
prefix basically does nothing. The prefix now behaves exactly like with
other commands that use spawn_thread.
This also means using the prefix in the preset input.conf is pointless
(without effect) and misleading, so remove that.
The each_frame mode was actually particularly painful in making this
change, since the player wants to block for it when writing a
screenshot, and generally doesn't fit into the new infrastructure. It
was still relatively easy to reimplement by copying the original command
and then repeating it on each frame. The waiting is reentrant now, so
move the call in video.c to a "safer" spot.
One way to observe how the new semantics interact with everything is
using the mpv repl script and sending a screenshot command through it.
Without async flag, the script will freeze while writing the screenshot
(while playback continues), while with async flag it continues.
Commands are not a monolithic giant switch() statement anymore, but
individual functions. There's no reason to have the command handlers
themselves in command.c, with a weird under-defined API in between.
(In the future, I'd like to split up command.c further, and when I do
that, scrrenshot.c will probably gets its own mp_cmd_def[] array, and
define the commands locally instead of exporting the raw handlers.)
The existing thread pool code is the most primitive thread pool
possible. That's fine, but one annoying thing was that it used a static
number of threads. Make it dynamic, so we don't need to "waste" idle
threads.
This tries to add threads as needed. If threads are idle for some time,
destroy them again until a minimum number of threads is reached.
Also change the license to ISC.
Using the GL renderer for color conversion will make sure screenshots
will use the same conversion as normal video rendering. It can do this
for all types of screenshots.
The logic when to write 16 bit PNGs changes. To approximate the old
behavior, we decide by looking whether the source video format has more
than 8 bits per component. We apply this logic even for window
screenshots. Also, 16 bit PNGs now always include an unused alpha
channel. The reason is that FFmpeg has RGB48 and RGBA64 formats, but no
RGB064. RGB48 is 3 bytes and usually not supported by GPUs for
rendering, so we have to use RGBA64, which forces an alpha channel.
Will break for users who use --target-trc and similar options.
I considered creating a new gl_video context, but it could double GPU
memory use, so I didn't.
This uses FBOs instead of glGetTexImage(), because that increases the
chance it could work on GLES (e.g. ANGLE). Untested. No support for the
Vulkan and D3D11 backends yet.
Fixes#5498. Also fixes#5240, because the code for reading back is not
used with the new code path.
Move dec_video.c to filters/f_decoder_wrapper.c. It essentially becomes
a source filter. vd.h mostly disappears, because mp_filter takes care of
the dataflow, but its remains are in struct mp_decoder_fns.
One goal is to simplify dataflow by letting the filter framework handle
it (or more accurately, using its conventions). One result is that the
decode calls disappear from video.c, because we simply connect the
decoder wrapper and the filter chain with mp_pin_connect().
Another goal is to eventually remove the code duplication between the
audio and video paths for this. This commit prepares for this by trying
to make f_decoder_wrapper.c extensible, so it can be used for audio as
well later.
Decoder framedropping changes a bit. It doesn't seem to be worse than
before, and it's an obscure feature, so I'm content with its new state.
Some special code that was apparently meant to avoid dropping too many
frames in a row is removed, though.
I'm not sure how the source code tree should be organized. For one,
video/decode/vd_lavc.c is the only file in its directory, which is a bit
annoying.
This was phased out, and was used only by vdpau by now. Drop the
mechanism and the vdpau special code, which means screenshots won't
include the vf_vdpaupp processing anymore. (I don't care enough about
vdpau, it's on its way out.)
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes#4250.
This is just a pointless refactor with the only goal of making
image_writer_opts.format a number.
The pointless part of it is that instead of using some sort of arbitrary
ID (in place of a file extension string), we use a AV_CODEC_ID_. There
was also some idea of falling back to the libavcodec MJPEG encoder if
mpv was not linked against libjpeg, but this fails. libavcodec insist on
having AV_PIX_FMT_YUVJ420P, which we pretend does not exist, and which
we always map to AV_PIX_FMT_YUV420P (without the J indicating full
range), so encoder init fails. This is pretty dumb, but whatever. The
not-caring factor is raised by the fact that we don't know that we
should convert to full range, because encoders have no proper way to
signal this. (Be reminded that AV_PIX_FMT_YUVJ420P is deprecated.)
This also will set image=NULL, if the video frame is marked as hwaccel,
and could not be copied to normal RAM. This will probably change the
error message (due to screenshot_get() returning NULL, instead of making
image conversion fail at a later point), but the behavior is the same
anyway.
mp_image_hw_download() is a libavutil wrapper added in the previous
commit. We drop our own code completely, as everything is provided by
libavutil and our helper wrapper.
This breaks the screenshot code, so that has to be adjusted as well.
The main change is with video/hwdec.h. mp_hwdec_info is made opaque (and
renamed to mp_hwdec_devices). Its accessors are mainly thread-safe (or
documented where not), which makes the whole thing saner and cleaner. In
particular, thread-safety rules become less subtle and more obvious.
The new internal API makes it easier to support multiple OpenGL interop
backends. (Although this is not done yet, and it's not clear whether it
ever will.)
This also removes all the API-specific fields from mp_hwdec_ctx and
replaces them with a "ctx" field. For d3d in particular, we drop the
mp_d3d_ctx struct completely, and pass the interfaces directly.
Remove the emulation checks from vaapi.c and vdpau.c; they are
pointless, and the checks that matter are done on the VO layer.
The d3d hardware decoders might slightly change behavior: dxva2-copy
will not use the VO device anymore if the VO supports proper interop.
This pretty much assumes that any in such cases the VO will not use any
form of exclusive mode, which makes using the VO device in copy mode
unnecessary.
This is a big refactor. Some things may be untested and could be broken.
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
Eventually we want the VO be driven by a A->V filter, so a decoder
doesn't even have to exist. Some features definitely require a decoder
though (like reporting the decoder in use, hardware decoding, etc.), so
for each thing which accessed d_video, it has to be redecided if and how
it can access decoder state.
At least the "framedrop" property slightly changes semantics: you can
now always set this property, even if no video is active.
Some untested changes in this commit, but our bio-based distributed
test suite has to take care of this.
MPlayer traditionally always used the display aspect ratio, e.g. 16:9,
while FFmpeg uses the sample (aka pixel) aspect ratio.
Both have a bunch of advantages and disadvantages. Actually, it seems
using sample aspect ratio is generally nicer. The main reason for the
change is making mpv closer to how FFmpeg works in order to make life
easier. It's also nice that everything uses integer fractions instead
of floats now (except --video-aspect option/property).
Note that there is at least 1 user-visible change: vf_dsize now does
not set the display size, only the display aspect ratio. This is
because the image_params d_w/d_h fields did not just set the display
aspect, but also the size (except in encoding mode).
Previously, with mpv --force-window=yes --idle=yes --screenshot-template="%f",
mpv would display an error saying that the template was incorrect, which it
isn't, there's just no file to put in the format. In this case, just use the
string "NO_FILE".
It's entirely useless, especially now that vo.c handles screenshots in a
generic way, and requires no special VO support. There are some
potential weird use-cases, but actually I've never seen it being used.
The old behavior does not make too much sense after all. If you don't
want to file to be overwritten, the user can check this manually.
This is a change in behavior - let's hope nobody actually relied on it.
nanahi
Kacper Michajłow
Dudemanguy
sfan5
cloud11665
Leo Izen
Christoph Heinrich
Thomas Weißschuh
Niklas Haas
wm4
Nicolas F
Dmitrij D. Czarkoff
Kevin Mitchell
Marcin Kurczewski