Introduce a general track struct for every audio/video/subtitle track
known to the frontend. External files (subtitles) are now represented
as tracks too. This mainly serves to clean up the subtitle selection
code: now every subtitle is simply a track, instead of using a messy
numbering that goes by subtitle type (as it was stored in the
global_sub_pos field). The mplayer fontend will list external subtitle
files as additional tracks.
The timeline code now tries to match the exact demuxer IDs of all
tracks. This may cause problems when Matroska files with different
track numberings are used with EDL timelines. Change demux_lavf not
to set demuxer IDs, since most time they are not set.
This messes deeply with the subtitle bookkeeping data structures, and
would have to be reimplemented anyway.
It's not sure what this was even useful for. Possibly for slave mode.
Add a flags parameter to mp_input_set_section(). Add a flag that defines
whether bindings in the default section are used or not. This is useful
for special functionality, where the normal key bindings may have
unwanted effects.
For example, it shouldn't be possible to seek during encoding. However,
you want to be able to cancel the encoding process gracefully. For that
purpose, the "encode" section of input.conf could be made exclusive:
mp_input_set_section(mpctx->input, "encode", MP_INPUT_NO_DEFAULT_SECTION);
And input.conf could contain this definition:
RIGHT seek 10
q {encode} quit
Then only the key "q" would be bound during encoding.
When the internal mplayer MPEG demuxer was removed (commit 1fde09db),
the default demuxer when using dvdnav was set to libavformat. Now it
turns out that this doesn't work with libavformat. It will terminate
playback right after the audio runs out (instead of looping it like the
video, or whatever it's supposed to do). I'm not sure what exactly the
problem is, but since 1. even mplayer-svn can't handle DVD menus
directly (missing highlights), 2. DVD menus are essentially worthless,
and 3. I don't directly watch DVDs, don't bother with it and remove it.
For basic playback, there's still libdvdread support.
Also, use pkg-config for libdvdread, and drop support for in-tree
libdvdread. Remove support for in-tree libdvdcss as well.
Options parsing used to be ambiguous, as in the splitting into option
and values pairs was ambiguous. Example:
-option -something
It wasn't clear whether -option actually takes an argument or not. The
string "-something" could either be a separate option, or an argument
to "-option". The code had to call the option specific parser function
to resolve this.
This made everything complicated and didn't even have a real use. There
was only one case where this was actually used: string lists
(m_option_type_string_list) and options based on it. That is because
this option type actually turns a single option into a proxy for several
real arguments, e.g. "vf*" can handle "-vf-add" and "-vf-clr". Options
suffixed with "-clr" are the only options of this group which take no
arguments.
This is ambiguous only with the "old syntax" (as shown above). The "new"
option syntax always puts option name and value into same argument.
(E.g. "--option=--something" or "--option" "--something".)
Simplify the code by making it statically known whether an option takes
a parameter or not with the flag M_OPT_TYPE_OLD_SYNTAX_NO_PARAM. If it's
set, the option parser assumes the option takes no argument.
The only real ambiguity left, string list options that end on "-clr",
are special cased in the parser.
Remove some duplication of the logic in the command line parser by
moving all argument splitting logic into split_opt(). (It's arguable
whether that can be considered code duplication, but now the code is a
bit simpler anyway. This might be subjective.)
Remove the "ambiguous" parameter from all option parsing related code.
Make m_config unaware of the pre-parsing concept.
Make most CONF_NOCFG options also CONF_GLOBAL (except those explicitly
usable as per-file options.)
Teletext requires special OSD support. Because I can't even test
teletext, I can't restore support for it. Since teletext can be
considered ancient and obscure, and since it doesn't make sense to keep
the remaining teletext code without being able to use it, I'm removing
it.
While this was an interesting idea, it wasn't actually useful.
Basically it dumped the raw data (as requested by the demuxer) into a
file. The result is only useful if the file format was raw or maybe
some MPEG packet stream, but not with most modern file formats.
The internal array of default key bindings is removed. Include the
file etc/input.conf at compile time (using the file2header tool), and
parse the default binds from etc/input.conf at startup time.
This lowers maintainance overhead, and makes sure the default bindings
and etc/input.conf don't deviate. Commit f30bf73bf2 already
made sure etc/input.conf matches the default bindings, so this commit
shouldn't change anything user-visible.
Now input.conf is loaded into memory at once, instead of streaming the
file into the parser.
The real reason for this change is that I want to be able to read the
config file from memory. (Using fmemopen() would have been simpler, but
that is available on sane platforms only.)
This was done with the help of callcatcher [1]. Only functions which
are statically known to be unused are removed.
Some unused functions are not removed yet, because they might be needed
in the near future (such as open_output_stream for the encode branch).
There is one user visible change: the --subcc option did nothing, and is
removed with this commit.
[1] http://www.skynet.ie/~caolan/Packages/callcatcher.html
Summary:
- There is no playtree anymore. It's reduced to a simple list.
- Options are now always global. You can still have per-file options,
but these are optional and require special syntax.
- The slave command pt_step has been removed, and playlist_next
and playlist_prev added. (See etc/input.conf changes.)
This is a user visible incompatible change, and will break slave-mode
applications.
- The pt_clear slave command is renamed to playlist_clear.
- Playtree entries could have multiple files. This is not the case
anymore, and playlist entries have always exactly one entry. Whenever
something adds more than one file (like ASX playlists or dvd:// or
dvdnav:// on the command line), all files are added as separate
playlist entries.
Note that some of the changes are quite deep and violent. Expect
regressions.
The playlist parsing code in particular is of low quality. I didn't try
to improve it, and merely spent to least effort necessary to keep it
somehow working. (Especially ASX playlist handling.)
The playtree code was complicated and bloated. It was also barely used.
Most users don't even know that mplayer manages the playlist as tree,
or how to use it. The most obscure features was probably specifying a
tree on command line (with '{' and '}' to create/close tree nodes). It
filled the player code with complexity and confused users with weird
slave commands like pt_up.
Replace the playtree with a simple flat playlist. Playlist parsers that
actually return trees are changed to append all files to the playlist
pre-order.
It used to be the responsibility of the playtree code to change per-file
config options. Now this is done by the player core, and the playlist
code is free of such details.
Options are not per-file by default anymore. This was a very obscure and
complicated feature that confused even experienced users. Consider the
following command line:
mplayer file1.mkv file2.mkv --no-audio file3.mkv
This will disable the audio for file2.mkv only, because options are
per-file by default. To make the option affect all files, you're
supposed to put it before the first file.
This is bad, because normally you don't need per-file options. They are
very rarely needed, and the only reasonable use cases I can imagine are
use of the encode backend (mplayer encode branch), or for debugging. The
normal use case is made harder, and the feature is perceived as bug.
Even worse, correct usage is hard to explain for users.
Make all options global by default. The position of an option isn't
significant anymore (except for options that compensate each other,
consider --shuffle --no-shuffle).
One other important change is that no options are reset anymore if a
new file is started. If you change settings with slave mode commands,
they will not be changed by playing a new file. (Exceptions include
settings that are too file specific, like audio/subtitle stream
selection.)
There is still some need for per-file options. Debugging and encoding
are use cases that profit from per-file options. Per-file profiles (as
well as per-protocol and per-VO/AO options) need the implementation
related mechanisms to backup and restore options when the playback file
changes.
Simplify the save-slot stuff, which is possible because there is no
hierarchical play tree anymore. Now there's a simple backup field.
Add a way to specify per-file options on command line. Example:
mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3
will have the following options per file set:
f1.mkv, f4.mkv: -o0 -o3
f2.mkv, f3.mkv: -o0 -o3 -o1 -o2
The options --{ and --} start and end per-file options. All files inside
the { } will be affected by the options equally (similar to how global
options and multiple files are handled). When playback of a file starts,
the per-file options are set according to the command line. When
playback ends, the per-file options are restored to the values when
playback started.
The command lists the audio and subtitle tracks in the current file on the
OSD. It also marks the currently active streams.
Video streams are not shown, as files with more than one video stream are
exceedingly rare.
The command lists the chapters in the current file on the OSD. It also
marks the current chapter.
This is actually a cheap replacement for the chapter select libmenu
functionality.
Conflicts:
.gitignore
bstr.c
cfg-mplayer.h
defaultopts.c
libvo/video_out.c
The conflict in bstr.c is due to uau adding a bstr_getline function in
commit 2ba8b91a97. This function already existed in this branch.
While uau's function is obviously derived from mine, it's incompatible.
His function preserves line breaks, while mine strips them. Add a
bstr_strip_linebreaks function, fix all other uses of bstr_getline, and
pick uau's implementation.
In .gitignore, change vo_gl3_shaders.h to use an absolute path
additional to resolving the merge conflict.
Add an alternate mode for option parser objects (struct m_config)
which is not inherently tied to any particular instance of an option
value struct. Instead, this type or parsers can be used to initialize
defaults in or parse values into a struct given as a parameter. They
do not have the save slot functionality used for main player
configuration. The new functionality will be used to replace the
separate subopt_helper.c parsing code that is currently used to parse
per-object suboptions in VOs etc.
Previously, option default values were handled by initializing them in
external code before creating a parser. This initialization was done
with constants even for dynamically-allocated types like strings.
Because trying to free a pointer to a constant would cause a crash
when trying to replace the default with another value, parser
initialization code then replaced all the original defaults with
dynamically-allocated copies. This replace-with-copy behavior is no
longer supported for new-style options; instead the option definition
itself may contain a default value (new OPTDEF macros), and the new
function m_config_initialize() is used to set all options to their
default values. Convert the existing initialized dynamically allocated
options in main config (the string options --dumpfile, --term-osd-esc,
--input=conf) to use this. Other non-dynamic ones could be later
converted to use this style of initialization too.
There's currently no public call to free all dynamically allocated
options in a given option struct because I intend to use talloc
functionality for that (make them children of the struct and free with
it).
Change the --input=keylist and --input=cmdlist suboptions to use the
"print function" option type. This changes their semantics somewhat,
and now some other output can appear after the printed lists (before,
they called "exit(0)" directly). I'm not aware of any program parsing
the output which could be affected.
Conflicts:
bstr.c
bstr.h
libvo/cocoa_common.m
libvo/gl_common.c
libvo/video_out.c
mplayer.c
screenshot.c
sub/subassconvert.c
Merge of cocoa_common.m done by pigoz.
Picking my version of screenshot.c. The fix in commit aadf1002f8 will
be redone in a follow-up commit, as the original commit causes too many
conflicts with the work done locally in this branch, and other work in
progress.
Add code to wake up the select() call in input.c when an OSX event is
available and a Cocoa OpenGL backend is initialized.
Fixes the slow response to input or other events in Cocoa-based VOs
during long select() sleeps (e.g., when mplayer2 is paused) introduced
by commit 7040968.
For ao_pulse, the current latency is not a good indicator of how soon
the AO requires new data to avoid underflow. Add an internal pipe that
can be used to wake up the input loop from select(), and make the
pulseaudio main loop (which runs in a separate thread) use this
mechanism when pulse requests more data. The wakeup signal currently
contains no information about the reason for the wakup, but audio
buffers are always filled when the event loop wakes up.
Also, request a latency of 1 second from the Pulseaudio server. The
default is normally significantly higher. We don't need low latency,
while higher latency helps prevent underflows reduces need for
wakeups.
This moves all key codes above the highest valid unicode code point
(which is 0x10FFFF). All key codes below MP_KEY_BASE now directly map
to unicode (KEY_ENTER is 13, carriage return). Configuration files
(input.conf) can contain unicode characters in UTF-8 to map non-ASCII
characters/keys.
This shouldn't change anything user visible, except that "direct key
codes" (as used in input.conf) will change their meaning.
Parts of the bstr functions taken from libavutil's GET_UTF8 and
slightly modified.
Windows uses a legacy codepage for char* / runtime functions accepting
char *. Using UTF-8 as the codepage with setlocale() is explicitly
forbidden.
Work this around by overriding the MSVCRT functions with wrapper
macros, that assume UTF-8 and use "proper" API calls like _wopen etc.
to deal with unicode filenames. All code that uses standard functions
that take or return filenames must now include osdep/io.h. stat()
can't be overridden, because MinGW-w64 itself defines "stat" as a
macro. Change code to use use mp_stat() instead.
This is not perfectly clean, but still somewhat sane, and much better
than littering the rest of the mplayer code with MinGW specific hacks.
It's also a bit fragile, but that's actually little different from the
previous situation. Also, MinGW is unlikely to ever include a nice way
of dealing with this.
This deletes all playlist elements, except the currently active
playlist entry.
NOTE: this doesn't remove parent nodes in the case when we really have
a play tree (as opposed to a play list). Apparently this doesn't cause
any harm.
Using type = -1 for terminating the command argument list was an
unnecessary complication. Change it to 0 to make use of default
initialization. Remove the explicit termination from the command
definitions. Now the argument list is automatically terminated by C
default initialization rules.
Also remove other redundant {0} initializers.
When an argument's default value is actually initialized to something other
than 0, make the field being initialized explicit (e.g. {1} becomes
{.i = 1}).
Try to make use of whitespace more consistent.
This moves all key codes above the highest valid unicode code point (which
is 0x10FFFF). All key codes below MP_KEY_BASE now directly map to unicode.
Configuration files (input.conf) can contain unicode characters in UTF-8
to map non-ASCII characters/keys.
This shouldn't change anything user visible, except that "direct key codes"
(as used in input.conf) will change their meaning.
Note: now that libmenu has been removed, the related code in input.c has
been removed. If libmenu is ever added back, a queue_remove() function
that can remove any item in the input queue will be required.
libmenu triggered some special case that caused crashes by double frees.
In particular the queue_pop function is used, expecting to remove an element
that is not necessarily always the one that queue_pop removes. Fix by
adding a queue_remove functions. Rewrite the other queue functions, since
these are probably buggy as well. queue_pop didn't even attempt to
maintain the doubly linked list.
The screenshot command normally converts the currently displayed video
frame to an image. Add support for an alternative screenshot mode
that is supposed to capture the real window contents. Such a
screenshot contains a possibly scaled version of the frame, the OSD,
and subtitles.
Add a default key binding Alt+s for taking screenshots in this mode.
This needs special VO support, and might not work with all VOs (this
commit does not yet contain an implementation for any VO, only the
infrastructure).
Something like the OSD menu functionality could be useful. However the
current implementation has several problems and would require a
relatively large amount of work to get into good shape. As far as I
know there are few users of the existing functionality. Nobody is
working on the existing code and keeping it compiling at all while
changing other code would require extra work. So delete the menu code
and some related code elsewhere that's used by nothing else.
Rewrite control of the colorspace and input/output level parameters
used in YUV-RGB conversions, replacing VO-specific suboptions with new
common options and adding configuration support to more cases.
Add new option --colormatrix which selects the colorspace the original
video is assumed to have in YUV->RGB conversions. The default
behavior changes from assuming BT.601 to colorspace autoselection
between BT.601 and BT.709 using a simple heuristic based on video
size. Add new options --colormatrix-input-range and
--colormatrix-output-range which select input YUV and output RGB range.
Disable the previously existing VO-specific colorspace and level
conversion suboptions in vo_gl and vo_vdpau. Remove the
"yuv_colorspace" property and replace it with one named "colormatrix"
and semantics matching the new option. Add new properties matching the
options for level conversion.
Colorspace selection is currently supported by vo_gl, vo_vdpau, vo_xv
and vf_scale, and all can change it at runtime (previously only
vo_vdpau and vo_xv could). vo_vdpau now uses the same conversion
matrix generation as vo_gl instead of libvdpau functionality; the main
functional difference is that the "contrast" equalizer control behaves
somewhat differently (it scales the Y component around 1/2 instead of
around 0, so that contrast 0 makes the image gray rather than black).
vo_xv does not support level conversion. vf_scale supports range
setting for input, but always outputs full-range RGB.
The value of the slave properties is the policy setting used for
conversions. This means they can be set to any value regardless of
whether the current VO supports that value or whether there currently
even is any video. Possibly separate properties could be added to
query the conversion actually used at the moment, if any.
Because the colorspace and level settings are now set with a single
VF/VO control call, the return value of that is no longer used to
signal whether all the settings are actually supported. Instead code
should set all the details it can support, and ignore the rest. The
core will use GET_YUV_COLORSPACE to check which colorspace details
have been set and which not. In other words, the return value for
SET_YUV_COLORSPACE only signals whether any kind of YUV colorspace
conversion handling exists at all, and VOs have to take care to return
the actual state with GET_YUV_COLORSPACE instead.
To be changed in later commits: add missing option documentation.
Add option --ass-vsfilter-aspect-compat and corresponding property
ass_vsfilter_aspect_compat. The setting controls whether to enable the
emulation of traditional VSFilter behavior where subtitles are
stretched if the video is anamorphic (previously always enabled for
native SSA/ASS subtitles). Enabled by default. Add 'V' as a new
default keybinding to toggle the property.
Parsing of commands with string arguments had several problems. First,
escape handling modified the original string, which broke keyboard
command definitions with strings containing escapes. Second, in an
argument like "\\" the second quote was incorrectly considered escaped
even though the preceding '\' was itself escaped. Third, an
unterminated quoted string resulted in the argument being set to NULL
even if this violated the declared the minimum number of arguments to
the command type; this could cause a crash in the code executing the
parsed commands. Fix by rewriting the string argument parsing. Also
change int/float argument parsing so that the whole command is
rejected on error.
Rename the BSTR() function to bstr(). The former caused a conflict
with some Windows OS name, and it's no longer a macro so uppercase
naming is less appropriate.
Commit df899f59be removing a write outside a buffer triggered another
problem, as for some reason the code did not 0-terminate its read
buffer in the specific case that it had encountered an EOF, and as a
result could parse contents left in the buffer for a second time.
Usually this resulted in parsing error messages. Fix the problem by
rewriting the offending code in a less hacky form.
Recent commit 82b8f89bae ("input: rework event reading and command
queuing") had a problem in the handling of commands generated by
autorepeat code (this code is only used with joystick and Apple IR
remote input). Fix (still untested though).
Rework much of the logic related to reading from event sources and
queuing commands. The two biggest architecture changes are:
- The code buffering keycodes in mp_fifo.c is gone. Instead key input
is now immediately fed to input.c and interpreted as commands, and
then the commands are buffered instead.
- mp_input_get_cmd() now always tries to read every available event
from every event source and convert them to (buffered) commands.
Before it would only process new events until one new command became
available.
Some relevant behavior changes:
- Before commands could be lost when stream code called
mp_input_check_interrupt() which read commands (to see if they were
of types that triggered aborts during slow IO tasks) and then threw
them away. This was especially an issue if cache was enabled and slow
to read. Fixed - now it's possible to check whether there are queued
commands which will abort playback of the current file without
throwing other commands away.
- mp_input_check_interrupt() now prints a message if it returns
true. This is especially useful because the failures caused by
aborted stream reads can trigger error messages from other code that
was doing the read; the new message makes it more obvious what the
cause of the subsequent error messages is.
- It's now possible to again avoid making stdin non-blocking (which
caused some issues) without reintroducing extra latency. The change
will be done in a subsequent commit.
- Event sources that do not support select() should now have somewhat
lower latency in certain situations as they will be checked both
before and after select()/sleep in input reading; before the sleep
always happened first even if such sources already had queued
input. Before the key fifo was also handled in this manner (first
key triggered select, but if multiple were read then rest could be
delayed; however in most cases this didn't add latency in practice
as after central code started doing command handling it queried for
further commands with a max sleep time of 0).
- Key fifo limiting is more accurate now: it now counts actual
commands intead of keycodes, and all queued keys are read
immediately from input devices so they can be counted correctly.
- Since keypresses are now interpreted immediately, commands which
change keybindings will no longer affect following keypresses that
have already been read before the command is executed. This should
not be an issue in practice with current keybinding behavior.
Remove some unnecessary typedefs and remove pointless mp_ prefix from
some internal struct names.
Change the type of the "close_func" pointers from "void f(int fd)" to
"int f(int fd)" so that using standard close() there is valid.
Delete some useless assert() statements.
Move internal MP_MAX_KEY_DOWN define from input.h to input.c.
Previously messages that printed key/button names would have extra
names in button combinations appended after the main message,
resulting in output like:
No bind found for key 'MOUSE_BTN1'.-MOUSE_BTN3
Add a function that creates a complete combination name and use that
for all such messages. The above example changes to:
No bind found for key 'MOUSE_BTN1-MOUSE_BTN3'.
Other affected messages are a input.conf parsing error message and a
message about a bound command being invalid.
Increase the number of supported mouse buttons from 10 to 20. There
really seem to be input devices with at least 12.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33391 b3059339-0415-0410-9bf9-f77b7e298cf2
Neither fd 0 slave input (-slave) nor additional opened fds (-input
file=X) were set to nonblocking mode as they should have been. Fix.
Also rename the horribly generic USE_SELECT #define used for a
specific slave input detail.
Instead of strictly limiting the number of total entries in the
internal fifo, make the overall buffer bigger and try to limit entries
based on how many bound commands they're expected to generate. Now
doubleclick and button down events aren't counted for that limit.
Normally the sequence down-doubleclick-up generates at most one
command, so this better matches the quantity we actually want to
limit. Also add a mechanism to clear the button combination state kept
by input.c when the fifo is full; this avoids "stuck button" problems
due to button release events being dropped.
The key combination state clearing is partially based on MPlayer 1
changes by Reimar Döffinger (though overall the effects of this commit
are quite different). It still doesn't make "stuck button" problems
completely impossible; at least if the VO gets closed while a button
was down then nothing will send a button up event or reset state.
The code combining button presses into multibutton commands prevented
single click commands from triggering if a doubleclick event had been
generated from the same button press. As a result using the mouse
wheel to seek worked very badly. Special-case doubleclick events in
the event interpretation code to avoid this issue. This changes the
sequence of generated "keys" for press-release-press-release from
MOUSE_BTN0 MOUSE_BTN0-MOUSE_BTN0_DBL MOUSE_BTN0_DBL to
MOUSE_BTN0 MOUSE_BTN0_DBL MOUSE_BTN0.
"Keys" like MOUSE_BTN0-MOUSE_BTN0_DBL will never be generated now; any
existing configuration files using those need to be changed.
Move the definitions of all special key codes (those not passed by
ASCII value) to input/keycodes.h. Before they were spread between
osdep/keycodes.h, input/joystick.h, input/mouse.h and input/ar.h, plus
some special values in input.h. This was especially inconvenient as
the codes had to be coordinated to not conflict between the files.
The change requires a bit of ugliness as appleir.c includes
<linux/input.h> which contains various conflicting KEY_* definitions.
Work around this by adding a special preprocessor variable which can
be used to avoid defining these in keycodes.h.
The input code read at most one event per input or command fd. If this
event was not bound to any recognized command then no command was
returned, and higher-level code could not distinguish this case from
there being no pending events left. As a result unbound events would
cause extra latency in event processing. Change the input code to
continue reading events until it either finds one that maps to a
command or hits EOF/error.
The input loop select() call was only run if there was at least one
input file descriptor. However other code uses the input loop to wait;
this could result in the wait becoming a busy loop when running with
-noconsolecontrols (without that there is at least one input fd for
terminal input). Make the input loop call select() to sleep even if
there are no input file descriptors.
Enter and Tab are the only named keys (rather than identified by the
printable character they produce) with code below 256. Add a special
case to recognize the Shift modifier with them.
The keycodes.h file contains a KEY_CTRL define, then various control
keys expressed as "KEY_CTRL + 0" and so on. Back in 2002 when the key
name table in input.c was created this KEY_CTRL define was mistakenly
interpreted as a key name, apparently confusing it with the Ctrl key
(even though the input system didn't handle that key back then). As a
result there was an incorrect key name entry with the same key code as
backspace and name "CTRL". This incorrect entry was used when printing
the name of the key. Delete it.
* hr-seek:
input: add default keybindings Shift+[arrow] for small exact seeks
input: support bindings with modifier keys for X input
core: audio: make ogg missing audio timing workaround more complex
core: add support for precise non-keyframe-limited seeks
core: add struct for queued seek info
commands: add generic option -> property wrapper
options: add "choice" option type, use for -pts-association-mode
core: remove looping in update_video(), modify command handling a bit
core: seek: use accurate seek mode with audio-only files
core: avoid using sh_video->pts as "current pts"
libvo: register X11 connection fd in input event system
core: timing: add special handling of long frame intervals
core: move central play loop to a separate function
Conflicts:
DOCS/tech/slave.txt
Add support for binding commands to modifier+key combinations like
"Shift+Left" or "Ctrl+Alt+x", and support reading such combinations
from the output window of X VOs.
The recognized modifier names are Shift, Ctrl, Alt and Meta. Any
combination of those and then a non-modifier key name, separated by
'+', is accepted as a key name in input.conf. For non-special keys
that produce characters shift is ignored as a modifier. For example
"A" is handled as a key without modifiers even if you use shift to
write the capital letter; 'a' vs 'A' already distinguishes the
combinations with a normal keymap, and having separate 'a', 'Shift+A'
and 'A' (written with caps lock for example) would bring more
confusion than benefit.
Currently reading the modifier+key combinations is only supported in
the output window of those VOs that use x11_common.c event
handling. It's not possible to input the key combinations in other VOs
or in a terminal window.
Add support for seeking to an arbitrary non-keyframe position by
decoding video starting from the previous keyframe. Whether to use
this functionality when seeking is controlled by the new option
-hr-seek and a new third argument to the "seek" command. The default
is to use it for absolute seeks (like chapter seeks) but not for
relative ones. Because there's currently no support for cutting
encoded audio some desync is expected if encoded audio passthrough is
used. Currently precise seeks always go to the first frame with
timestamp equal to or greater than the target position; there's no
support for "matching or earlier" backwards seeks at frame level.
If a specified key is pressed during playback, the current stream is
captured to a file, similar to what -dumpstream achieves.
original patch by Pásztor Szilárd, don tricon hu
Taken from the following svn commits, but with several fixes and
modifications (one obvious user-visible difference is that the default
key binding is 'C', not 'c'):
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32524 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32529 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32530 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not fail opening a -input file= file just because stat failed, but try
to call "open" in any case.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32497 b3059339-0415-0410-9bf9-f77b7e298cf2
Make code clearer by putting the "special case hack" inside the if.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32499 b3059339-0415-0410-9bf9-f77b7e298cf2
These files now contain different functions related to path handling.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30943 b3059339-0415-0410-9bf9-f77b7e298cf2
Add a property to select YUV colorspace. Currently implemented only in
vo_vdpau and vo_xv. Allows switching between BT.601, BT.709 and
SMPTE-240M (vdpau only).
The xv support uses the "XV_ITURBT_709" attribute. At least my NVIDIA
card supports that; I don't know whether other xv implementations do.
Bind the colorspace switch to the 'c' key by default. 'c' is currently
used by vo_sdl for some fullscreen mode change thing, but at the moment
that does not conflict and if it will in the future then vo_sdl can
change.
VDPAU part based on a patch from Lauri Mylläri <lauri.myllari@gmail.com>
DVB teletext support is nearly finished, it will be possible to read
teletext from file, it will not be depending on reception any more.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29851 b3059339-0415-0410-9bf9-f77b7e298cf2
Define a way to show the property on the OSD and use step_property_osd
instead of step_property. Also change the mp_property_deinterlace()
function to use m_property_flag_ro() to make it print
'enabled/disabled' instead of 'yes/no'.
The GUI is badly designed and too closely coupled to the internal
details of other code. The GUI code is in bad shape and unmaintained
for years. There is no indication that anyone would maintain it in the
future either. Even if someone did volunteer to implement a better
integrated GUI having the current code in the tree probably wouldn't
help much. So get rid of it.
different behaviour is unlikely to make sense but it is better to handle
this in input.c instead of adding special cases to mplayer.c and being
able to override the default behaviour at least should not hurt.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@28870 b3059339-0415-0410-9bf9-f77b7e298cf2
Replace all USE_ prefixes by CONFIG_ prefixes to indicate
options which are configurable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27373 b3059339-0415-0410-9bf9-f77b7e298cf2
Parameters now use a string much more intuitive than previous int value.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27100 b3059339-0415-0410-9bf9-f77b7e298cf2
Mostly useful when used with -idle mode.
Patch by Mathieu Schroeter ( mathieu dot schroeter at gamesover dot ch )
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26909 b3059339-0415-0410-9bf9-f77b7e298cf2
The amount of computers capable of using it is too low in the field to
enable it by default.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26797 b3059339-0415-0410-9bf9-f77b7e298cf2
This requires Linux 2.6 with evdev and appleir drivers.
The keymapping is done to mimics the one that was done for MacOSX.
WARNING: Most distributions do not seems to bother and only let root
access to the device. Modify udev rules accordingly if you want regular
user to be able to use the remote.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26795 b3059339-0415-0410-9bf9-f77b7e298cf2
Convert the remaining non-talloc memory allocations so that everything
in the file consistently uses talloc. Make one additional minor code
simplification in read_cmd.
Start moving static variables to a context struct. Only autorepeat
state is moved to the struct in this commit.
mp_input_check_interrupt now requires the context variable. Change
stream functions to pass it. It's still stored in a static variable in
stream/.
Use the same mp_input_add_key_fd for all uses and add a context
argument to its callback that was before only in the event fd
callbacks. Instead of checking in input.c whether keys were inserted
to the keypress FIFO during the callback do the check in the callback
before returning and set return value accordingly.
It's unlikely that this branch will ever compile with gcc 2.95 again,
so it's pointless to keep code uglifications done to work around its
limitations.
be called from a signal handler.
Instead only make the input system generate quit commands for the first
CTRL+C and otherwise do getch2_disable and exit.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25651 b3059339-0415-0410-9bf9-f77b7e298cf2
1. sub_source for current sub source (sub file, vobsub, or from demuxer).
2. sub_file for all subtitles from files.
3. sub_vobsub for all subtitles from vobsub.
4. sub_demux for all subtitles from demuxer.
Now mplayer can supply a stable and clear interface to external programs
using mplayer in slave mode to select a subtitle by its source and
its unique id for that source printed by mplayer using -identify parameter.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25157 b3059339-0415-0410-9bf9-f77b7e298cf2
input.c: In function 'mp_input_set_section':
input.c:1640: warning: suggest parentheses around assignment used as truth value
input.c:1643: warning: suggest parentheses around assignment used as truth value
mga_common.c: In function 'mga_init':
mga_common.c:394: warning: suggest parentheses around assignment used as truth value
playtreeparser.c: In function 'parse_smil':
playtreeparser.c:523: warning: suggest parentheses around assignment used as truth value
libmpdemux/demux_ts.c: In function 'ts_parse':
libmpdemux/demux_ts.c:2795: warning: suggest parentheses around assignment used as truth value
libmpdemux/demux_ts.c: In function 'demux_open_ts':
libmpdemux/demux_ts.c:591: warning: 'frame_length' may be used uninitialized in this function
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24444 b3059339-0415-0410-9bf9-f77b7e298cf2
It contains information about navigation links.
Modified patch from Otvos Attila oattila at chello dot hu
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24264 b3059339-0415-0410-9bf9-f77b7e298cf2
against instead of directly #including the C file and replace the many extern
declarations by a proper header file.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24262 b3059339-0415-0410-9bf9-f77b7e298cf2
Check whether an event handler called mp_input_queue_cmd and return the
command immediately if so. Currently x11_common.c creates commands from
mouse position updates.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24154 b3059339-0415-0410-9bf9-f77b7e298cf2
Add an input/input.c fd type whose read function takes no arguments and
returns no value. If such a function reads key or command events it'll
add them to the queues itself. Use this type for terminal input which
was special-cased before. The event function for X11-based VOs will use
the same type later.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24152 b3059339-0415-0410-9bf9-f77b7e298cf2
Previous code used two separate select() calls one after another, so
that whenever it was running select() on one set of fds events in the
other set would go unnoticed until later. Now there's a single select()
which allows reacting immediately to any input source.
The behavior of the new code differs somewhat from the old; for example
multiple fds that stay readable are no longer handled in a round-robin
fashion and the total amount the process sleeps can differ. Some tuning
might be required later.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24151 b3059339-0415-0410-9bf9-f77b7e298cf2
The Unix version of getch2() could either return an internally buffered
key or do a second-level select() in addition to the input.c one and
then read more data. Change getch2() to always add all read keys with
mplayer_put_key() (like video output window keyboard input does) and
remove the internal select() from the Unix version. Make input.c call
mplayer_get_key() directly.
The primary motivation for this change is to make combining multiple
event sources under one select() easier. Now getch2() only needs to be
called when the corresponding fd is readable, and it will be possible to
handle events from X-based VOs with the same code.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24149 b3059339-0415-0410-9bf9-f77b7e298cf2
The only case which does not override mp_input_default_key_func in
mp_input_add_key_fd() is fd 0, but that is later special-cased not to
use the input function at all. Remove the useless default function.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24148 b3059339-0415-0410-9bf9-f77b7e298cf2
Code is based on patch from Otvos Attila oattila at chello dot hu
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24125 b3059339-0415-0410-9bf9-f77b7e298cf2
patch by Zoltan Ponekker, pontscho kac.poliod hu
cleaned up by Ulion, ulion2002 gmail com with some help by Reimar and me
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@24057 b3059339-0415-0410-9bf9-f77b7e298cf2
r23530 breaks policy: notification was not sent to mailing list,
agreements of other devs were not received.
Code also should be reviewed/cleaned up/fixed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@23593 b3059339-0415-0410-9bf9-f77b7e298cf2
modified patch from Otvos Attila oattila at chello dot hu
Module uses zvbi library for all low-level VBI operations (like I/O with vbi
device, converting vbi pages into usefull vbi_page stuctures, rendering them
into RGB32 images).
All teletext related stuff (except properties, slave commands and rendering
osd in text mode or RGB32 rendered teletext pages in spu mode) is implemented
in tvi_vbi.c
New properties:
teletext_page - switching between pages
teletext_mode - switch between on/off/opaque/transparent modes
teletext_format - (currently read-only) allows to get format info
(black/white,gray,text)
teletext_half_page - trivial zooming (displaying top/bottom half of teletext
page)
New slave commands:
teletext_add_dec - user interface for jumping to any page by editing page number
interactively
teletext_go_link - goes though links, specified on current page
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@23530 b3059339-0415-0410-9bf9-f77b7e298cf2
allows to bind one input key to several slave commands (independently for each section)
as shown below:
RIGHT seek +10
RIGHT {tv} tv_step_channel 1
RIGHT {dvdnav} dvdnav 4
Currenlty only "tv" section added.
patch by Otvos Attila oattila at chello dot hu
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@23497 b3059339-0415-0410-9bf9-f77b7e298cf2
(cehoyos [at] rainbow studorg tuwien ac at) with small modifications
by me.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20989 b3059339-0415-0410-9bf9-f77b7e298cf2
Patch by Carl Eugen Hoyos [cehoyos <at> ag or at] with modifications by me.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20931 b3059339-0415-0410-9bf9-f77b7e298cf2
it's used to activate the button corresponding to the last mouse position.
This is a workaround against possibly buggy implementation of
upper_lower/upper_button_select() and friends; will be removed when
possible
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@19918 b3059339-0415-0410-9bf9-f77b7e298cf2
read-only information and modifies GetLanguage in Gui/mplayer/gtk/menu.c
to cope which the changes.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@19115 b3059339-0415-0410-9bf9-f77b7e298cf2
string on the OSD. Based on a patch 'by someone named "veal" on irc'
that showed the filename.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@18223 b3059339-0415-0410-9bf9-f77b7e298cf2
border, framedrop and vsync to properties. Also add a couple
of video related properties like width, height, etc.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@17929 b3059339-0415-0410-9bf9-f77b7e298cf2
Move the volume and mute command to the command to property
bridge.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@17912 b3059339-0415-0410-9bf9-f77b7e298cf2
