Commit Graph

7 Commits

Author SHA1 Message Date
wm4 4b5cee4617 core: use channel map on demuxer level too
This helps passing the channel layout correctly from decoder to audio
filter chain. (Because that part "reuses" the demuxer level codec
parameters, which is very disgusting.)

Note that ffmpeg stuff already passed the channel layout via
mp_copy_lav_codec_headers(). So other than easier dealing with the
demuxer/decoder parameters mess, there's no real advantage to doing
this.

Make the --channels option accept a channel map. Since simple numbers
map to standard layouts with the given number of channels, this is
downwards compatible. Likewise for demux_rawaudio.
2013-05-12 21:24:55 +02:00
wm4 d8bde114fd Prefix CODEC_ID_ with AV_
The old names have been deprecated a while ago, but were needed for
supporting older ffmpeg/libav versions. The deprecated identifiers
have been removed from recent Libav and FFmpeg git.

This change breaks compatibility with Libav 0.8.x and equivalent
FFmpeg releases.
2013-03-13 23:51:30 +01:00
Wessel Dankers 879ebe0655 Add a --dtshd option
The spdif decoder was hardcoded to assume that the spdif output is
capable of accepting high (>1.5Mbps) bitrates. While this is true
for modern HDMI spdif interfaces, the original coax/toslink system
cannot deal with this and will fail to work.

This patch adds an option --dtshd which can be enabled if you use
a DTS-capable receiver behind a HDMI link.
2013-03-04 21:18:20 +01:00
wm4 4d016a92c8 core: redo how codecs are mapped, remove codecs.conf
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)

The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)

demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.

Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.

Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
2013-02-10 17:25:56 +01:00
reimar a4177fd581 audio: make AC3 pass-through with ad_spdif work
Do not fall back to 0 for samplerate when parser is not initialized.

Might fix some issues with using -ac spdifenc with audio in MKV
or MP4.

git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35517 b3059339-0415-0410-9bf9-f77b7e298cf2

Replace outdated list of unsupported formats by list of supported formats.

git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35534 b3059339-0415-0410-9bf9-f77b7e298cf2

Do not call af_fmt2str on the same data over and over.

git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35535 b3059339-0415-0410-9bf9-f77b7e298cf2

ad_spdif: use the more specific AF_FORMAT_AC3_LE when
we handle AC3.

git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35536 b3059339-0415-0410-9bf9-f77b7e298cf2

Make AF_FORMAT_IS_IEC61937 include AF_FORMAT_IS_AC3.

Our AC3 "sample format" is also iec61937.

git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35537 b3059339-0415-0410-9bf9-f77b7e298cf2

af_format: support endianness conversion also for iec61937
formats in general, not just AC3.

git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35538 b3059339-0415-0410-9bf9-f77b7e298cf2

Conflicts:
	audio/filter/af_format.c

af_format: Fix check_format, non-special formats are of course supported.

git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35545 b3059339-0415-0410-9bf9-f77b7e298cf2

Note: see mplayer bug #2110
2012-12-03 21:08:52 +01:00
wm4 4873b32c59 Rename directories, move files (step 2 of 2)
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.

The two commits are separate, because git is bad at tracking renames
and content changes at the same time.

Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
2012-11-12 20:08:18 +01:00
wm4 d4bdd0473d Rename directories, move files (step 1 of 2) (does not compile)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.

Renames the following directories:
    libaf -> audio/filter
    libao2 -> audio/out
    libvo -> video/out
    libmpdemux -> demux

Split libmpcodecs:
    vf* -> video/filter
    vd*, dec_video.* -> video/decode
    mp_image*, img_format*, ... -> video/
    ad*, dec_audio.* -> audio/decode

libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.

Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.

sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).

Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.
2012-11-12 20:06:14 +01:00