matplotlib is pathetically slow, which makes using stats-conv.py to view
dumps longer than a few seconds a huge pain.
pyqtgraph is slightly faster than matplotlib. Other than that, it seems
to be worse in every aspect (at least for plotting), but such is life.
This reverts commit d11184a256.
Unfortunately, there was a lot of unexpected resistance.
Do note that this is still extremely slow, crappy, etc.
Note that vo_x11.c was further edited. Compared to the removed vo_x11.c,
an additional ~200 lines of code was removed in order to simplify it. I
tried to strip it down as much as possible. In particular, support for
odd non-32 bit formats (24, 16, 15, 8 bit) is dropped.
Closes#2300.
This AVPacket field was a hack against the fact that the duration field
was merely an int (too small for things like subtitle durations). Newer
libavcodec drops this field and makes duration 64 bit.
VideoToolbox is preferred. Now that FFmpeg released 2.8, there's no
reason to support VDA anymore. In fact, we had a bug that made VDA not
useable with older FFmpeg versions in some newer mpv releases.
VideoToolbox is supported even on slightly older OSX versions, and if
not, you still can run mpv without hw decoding.
There are at least 2 ways of using VAAPI without X11 (Wayland, DRM).
Remove the X11 requirement from the decoder part and the EGL interop.
This will be used by a following commit, which adds Wayland support.
The worst about this is the decoder part, which includes a bad hack for
using the decoder without any VO interop (also known as "vaapi-copy"
mode). Separate the X11 parts so that they're self-contained. For the
EGL interop code we do something similar (it's kept slightly simpler,
because it essentially only has to translate between our silly
MPGetNativeDisplay abstraction and the vaGetDisplay...() call).
It looks like my hope that we can unconditionally include EGL headers in
the OpenGL code is not coming true, because OSX does not support EGL at
all. So I prefer loading the VAAPI EGL/GL specific extensions manually,
because it's less of a mess. Partially reverts commit d47dff3f.
Make the GPU memcpy from the dxva2 code generally useful to other parts
of the player.
We need to check at configure time whether SSE intrinsics work at all.
(At least in this form, they won't work on clang, for example. It also
won't work on non-x86.)
Introduce a mp_image_copy_gpu(), and make the dxva2 code use it. Do some
awkward stuff to share the existing code used by mp_image_copy(). I'm
hoping that FFmpeg will sooner or later provide a function like this, so
we can remove most of this again. (There is a patch, bit it's stuck in
limbo since forever.)
All this is used by the following commit.
Should work much better than the old GLX interop code. Requires Mesa 11,
and explicitly selecting the X11 EGL backend with:
--vo=opengl:backend=x11egl
Should it turn out that the new interop works well, we will try to
autodetect EGL by default.
This code still uses some bad assumptions, like expecting surfaces to be
in NV12. (This is probably ok, because virtually all HW will use this
format. But we should at least check this on init or so, instead of
failing to render an image if our assumption doesn't hold up.)
This repo was a lot of help: https://github.com/gbeauchesne/ffvademo
The kodi code was also helpful (the magic FourCC it uses for
EGL_LINUX_DRM_FOURCC_EXT are nowhere documented, and
EGL_IMAGE_INTERNAL_FORMAT_EXT as used in ffvademo does
not actually exist).
(This is the 3rd VAAPI GL interop that was implemented in this player.)
These extensions use a bunch of EGL types, so we need to include the EGL
headers in common.h to use our GL function loader with this.
In the future, we should probably require presence of the EGL headers to
reduce the hacks. This might be not so simple at least with OSX, so for
now this has to do.
This was in sub/, because the code used to be specific to subtitles. It
was extended to automatically load external audio files too, and moving
the file and renaming it was long overdue.
I see no point in keeping these around. Keeping wrappers for some select
libavfilter filters just because MPlayer had these filters is not a good
reason.
Ultimately, all real filtering work should go to libavfilter, and users
should get used to using vf_lavfi directly. We might even not require
the awful double-nested syntax for using libavfilter one day.
vf_rotate, vf_yadif, vf_stereo3d are kept because mpv uses them
internally. (They all extend the lavfi filters or change their
defaults.) vf_mirror is kept for symmetry with vf_flip. vf_gradfun and
vf_pullup are probably semi-popular, so I'll remove them not yet - only
after some more discussion.
These were normalized and are saner now. We want to use the new fields,
and also get rid of the deprecation warnings, so use them. There's no
release yet which uses these, so some ifdeffery is unfortunately needed.
Some users still use this filter, so the filter was going to be kept.
But I overlooked that libavfilter provides this filter. Remove the
redundant wrapper from mpv. Something like --af=lavfi=bs2b should work
and give exactly the same results.
All of these filters are considered not useful anymore by us. Some have
replacements in libavfilter (useable through af_lavfi).
af_center, af_extrastereo, af_karaoke, af_sinesuppress, af_sub,
af_surround, af_sweep: pretty simple and useless filters which probably
nobody ever wants.
af_ladspa: has a replacement in libavfilter.
af_hrtf: the algorithm doesn't work properly on most sources, and the
implementation was buggy and complicated. (The filter was inherited from
MPlayer; but even in mpv times we had to apply fixes that fixed major
issues with added noise.) There is a ladspa filter if you still want to
use it.
af_export: I'm not even sure what this is supposed to do. Possibly it
was meant for GUIs rendering audio visualizations, but it couldn't
really work well. For example, the size of the audio depended on the
samplerate (fixed number of samples only), and it couldn't retrieve the
complete audio, only fragments. If this is really needed for GUIs, mpv
should add native visualization, or a proper API for it.
Fixes regression in dfd8a5f that made autoload not add more files
at the end of the current playlist if playlist was made by the
script.
This still prevents loading the script if more than one (media or
playlist) file was manually added.
This works similar to the existing .rar support, but uses libarchive.
libarchive supports a number of formats, including zip and (most of)
rar.
Unfortunately, seeking does not work too well. Most libarchive readers
do not support seeking, so it's emulated by skipping data until the
target position. On backwards seek, the file is reopened. This works
fine on a local machine (and if the file is not too large), but will
perform not so well over network connection.
This is disabled by default for now. One reason is that we try
libarchive on every file we open, before trying libavformat, and I'm not
sure if I trust libarchive that much yet. Another reason is that this
breaks multivolume rar support. While libarchive supports seeking in
rar, and (probably) supports multivolume archive, our support of
libarchive (probably) does not. I don't care about multivolume rar, but
vocal users do.
The waf build system generates this already. No point in redoing it in
the header file.
The legacy build system (which we really should drop) didn't; fix it.
Lua script that enables handling of certain commands depending on where
the mouse pointer is. Mostly useful for mouse-wheel handling via
input.conf.
Example:
MOUSE_BTN3 script-message-to zones commands "*-left: add volume +5"
"default: seek +10"
MOUSE_BTN4 script-message-to zones commands "*-left: add volume -5"
"default: seek -10"
Will changes behavior of Mouse Wheel Up/Down to alter volume if mouse is
in the left zone of the window, but re-adds the default to seek if wheel
is used on other parts.
Also add a note that you should not use the old build system. (It's only
kept because of the "asshole maintainer" rule: no matter how broken or
pointless someting is, as long as you're the maintainer and want to keep
it, it stays in the repo.)
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
For now, it needs to be explicitly selected. ENCA is still the default.
This assumes uchardet returns iconv names. This doesn't seem to be
always the case, and the result are lots of iconv errors. So
explicitly check for this situation, and print a warning if it
occurs. It's entirely possible that uchardet support is actually
useless, because names are not necessarily iconv-compatible (but
uchardet doesn't seem to document whether it attempts to return
iconv-compatible names if possible).
Fixes#908.
Normally, vdpau decoded frames are passed directly to a suitable
vo (vo_vdpau or vo_opengl) without ever touching system memory. This
is efficient for output purposes, but prevents any of the regular
filters from being used with such frames.
This new filter implements a read-back step to pull the frames back
into system memory where they can be acted on by other filters.
Eventually the frames will be sent to the vo as if they were normal
software-decoded frames.
Note that a vdpau compatible vo must still be used to ensure that
the decoder is properly initialised.
Signed-off-by: wm4 <wm4@nowhere>
Use char* for strings instead of bstr (data ptr + length pair). Matroska
actually (probably) allows "padding" strings with \0 bytes, so using
normal C strings instead of byte strings is more appropriate.
They are useless. Not only are they actually rarely in use; but
libavcodec doesn't even output them, as libavcodec has no such sample
formats for decoded audio.
Even if it should happen that we actually still need them (e.g. if doing
direct hardware output), there are better solutions. Swapping the sign
is a fast and lossless operation and can be done inplace, so AO actually
needing it could do this directly.
If you wonder why we keep U8 instead of S8: because libavcodec does it.
Yet another of these dozens of hwaccel changes. This time, libavcodec
provides utility functions, which initialize the vdpau decoder and map
codec profiles. So a lot of work the API user had to do falls away.
This also will give us support for high bit depth profiles, and possibly
HEVC once libavcodec supports it.
It's useless, and creates a bogus warning in subprocess-posix.c.
Since I don't know which compilers might have it by default, just change
it to -Wno-redundant-decls.
The previous commit effectively fixes the mess caused by 'config' vs.
'mpv.conf', and the hack introduced by commit e01a6dac and extended by
commit db167cd4 isn't needed anymore.
This commit adds notifications for hot plugging of devices. It also extends
the old behaviour of the `audio-out-detected-device` property which is now
backed by the hotplugging code. This allows clients to be notified when the
actual audio output device changes.
Maybe hotplugging should be supported for ao_coreaudio_exclusive too, but it's
device selection code is a bit fragile.
Apparently there's at least one distro which ships a /etc/mpv/mpv.conf
file (mpv doesn't install such a file). This breaks config files named
'config' located in the user's mpv config directory, because mpv first
loads files named 'config' and then 'mpv.conf'. There is no mechanism
for putting files with different names into the same config path order.
(Even worse, that mpv.conf file only set an option to the default value.
Why do distros always do very stupid things?)
Print a warning on collisions.
Although using 'config' was well-supported, supporting both names is
starting to become messy, so deprecate 'config' and print a warning if
one is found.
At least we will be able to remove the whole mess once 'config' files
are ignored...
This also affects the osx-bundle, which intentionally used these not-so-
optimal semantics. Solve it in a different way. (Unfortunately with an
ifdef - it's not required, but having to explain everyone why mpv tries
to load a osx-bundle.mpv file on Linux and Windows would consume
energy.)
Closes#1569.
Not very important for the command line player; but GUI applications
will want to know about this.
This only adds the internal API; support for specific audio outputs
comes later.
This reuses the ao struct as context for the hotplug event listener,
similar to how the "old" device listing API did. This is probably a bit
unclean and confusing. One argument got reusing it is that otherwise
rewriting parts of ao_pulse would be required (because the PulseAudio
API requires so damn much boilerplate). Another is that --ao-defaults is
applied to the hotplug dummy ao struct, which automatically applies such
defaults even to the hotplug context.
Notification works through the property observation mechanism in the
client API. The notification chain is a bit complicated: the AO notifies
the player, which in turn notifies the clients, which in turn will
actually retrieve the device list. (It still has the advantage that it's
slightly cleaner, since the AO stuff doesn't need to know about client
API issues.)
The weird handling of atomic flags in ao.c is because we still don't
require real atomics from the compiler. Otherwise we'd just use atomic
bitwise operations.
This fixes usage when the bundle is used on the same machine that Python/Cython
was compiled on. It doesn't fix the harder problem of packaging a full Python
installation in the mpv app bundle (and I'm not sure we actually want that).
Fixes#1549
No more equals signs for options that don't take values.
Complete values for options with preset choices.
Complete --no-whatever where applicable.
Fixes#997.
Add an explicit "signal" event type, because the implicit one was
confusing.
Don't rescale the Y axis of the second graph, it was nonsense.
Make the legend for the second graph separate (and cleanup the code
creating the graphs).
Sort the legend by the used y value of binary events/signals, add a way
to filter branches (although that requires editing the script), and use
the full screen if the second subplot is not used.
mpv does 'cascading' configs by overriding options as the config become more
important (bundle -> system level -> user level).
Unfortunately mpv also loads two sets of configs files one after the other [1].
First it looks for 'config', then for 'mpv.conf'. For this reason a mpv.conf in
ANY location will override ANY config files named config (even if the mpv.conf
is in a system path and config in a user path).
[1]: Relevant code in player/configfiles.c
load_all_cfgfiles(mpctx, section, "config");
load_all_cfgfiles(mpctx, section, "mpv.conf");
Fixes: #1361
- --lua and --lua-opts change to --script and --script-opts
- 'lua' default script dirs change to 'scripts'
- DOCS updated
- 'lua-settings' dir was _not_ modified
The old lua-based names/dirs still work, but display a warning.
Signed-off-by: wm4 <wm4@nowhere>
GNU sed and BSD sed don't share the same options for editing files in-place,
so a workaround is needed.
The most simple way is to use a pure python implementation of applying the
changes.
This was required by vf_pp, which was just removed.
vf_dlopen has this stuff in its API. This API is considered stable, so
the related fields are not removed from it. But the fields are always 0
now, so there's no point in keeping the example program around.
vf_pullup.c did some extremely awkward passthrough of this information,
but didn't actually use it.
Yep, Lua is so crappy that the stdlib doesn't provide anything like
this.
Repurposes the undocumented mp.format_table() function and moves it to
mp.utils.
Nothing is done with them yet. This is preparation for the following
commit.
CueRelativePosition isn't even saved anywhere, because I don't intend to
use it. (Too messy for no gain.)
This mechanism was introduced for Opus, and allows correct skipping of
"preroll" data, as well as discarding trailing audio if the file's
length isn't a multiple of the audio frame size.
Not sure how to handle seeking. I don't understand the purpose of the
SeekPreRoll element.
This was tested with correctness_trimming_nobeeps.opus, remuxed to mka
with mkvmerge v7.2.0. It seems to be correct, although the reported file
duration is incorrect (maybe a mkvmerge issue).
This isn't quite as robust as idet.sh as the default detection
interval is only 4 seconds vs 35 for idet.sh. idet.sh can have such a
large sample time since it turns off the vo and uses --untimed, which
is currently not possible from lua.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
The previous commit made the completion script always return non-zero, even when
a match is found. This explicitly sets the return value to zero whenever a match
is found but defaults to non-zero in case nothing is matched.
Returning a non-zero value signals to the zsh completion system that no matches
were added by the script so that it can try the user-defined matchers (e.g.
those defined with matcher-list).
Fixes#1008.
Bin Jin
James Ross-Gowan
wm4
bitingsock
Philip Sequeira
Rudolf Polzer
Ricardo Constantino
ChrisK2
Kevin Mitchell
Philip Langdale
Michael Vetter
Marcin Kurczewski
Adrian Sadłocha
robin007bond
Patrick Hipp
Jaime Marquínez Ferrándiz
Stefano Pigozzi
Vítor Galvão
Avi Halachmi (:avih)
Mihai Moldovan
Nyx0uf
Ben Boeckel
shdown
Bruno George de Moraes
Alessandro Ghedini
c_14
Tsukasa OMOTO